• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.307-309
• /
• 2009

We have fabricated vertical-type organic transistors (static induction transistors; SITs) with built-in nano-triode arrays formed in parallel by a colloidal-lithography technique. Using this technique, we could fabricate a microstructure in a lateral direction within a large-scale organic device without relying on photolithography. The organic transistor showed low operating voltages, high current output, and large transconductance.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1990.10a
• /
• pp.89-94
• /
• 1990

This study was performed to verify the behavior of channel type PC bridge through the full scale model test. It is well known that the behavior of connection is especially important in case of precast multi-beam bridges. In this study, the lateral load distribution capacity was found satisfactory and influenced little either by the type or strength of connections. Analysis results agreed well with test results. Parameter studies were performed based on the test and analysis results.

• Journal of the Korean Society for Railway
• /
• v.19 no.6
• /
• pp.744-754
• /
• 2016

Asphalt concrete track (ACT) is a track system connecting wide sleepers and concrete panels on top of an asphalt concrete layer; such a system requires adequate resistance force against various longitudinal and lateral external loads. In this study, a series of experiments were carried out to assess the longitudinal and lateral resistance force of a wide sleeper and concrete panel type ACT. The required shear resistance force of the horizontal displacement restraint device (HDRD) was evaluated. Furthermore, a concrete block type anchor and a steel pipe type anchor were developed as HDRDs. The shear resistance force was decided based on the experimental results of horizontal shear tests for each anchor system. In addition, proper numbers and arrangement design guidelines for the HDRDs were suggested considering the shear resisting capacity and economics for HDRDs applied to ACT.

• Journal of Korean Neurosurgical Society
• /
• v.58 no.5
• /
• pp.442-447
• /
• 2015

Objective : Ossification of the ligamentum nuchae (OLN) is usually asymptomatic and incidentally observed in cervical lateral radiographs. Previous literatures reported the correlation between OLN and cervical spondylosis. The purpose of this study was to elucidate the clinical significance of OLN with relation to cervical ossification of posterior longitudinal ligament (OPLL). Methods : We retrospectively compared the prevalence of OPLL in 105 patients with OLN and without OLN and compared the prevalence of OLN in 105 patients with OPLL and without OPLL. We also analyzed the relationship between the morphology of OLN and involved OPLL level. The OPLL level was classified as short (1-3) or long (4-6), and the morphologic subtype of OLN was categorized as round, rod, or segmented. Results : The prevalence of OPLL was significantly higher in the patients with OLN (64.7%) than without OLN (16.1%) (p=0.0001). And the prevalence of OLN was also higher in the patients with OPLL (54.2%) than without OPLL (29.5%) (p=0.0002). In patients with round type OLN, 5 of 26 (19.2%) showed long level OPLL, while in patients with larger type (rod and segmented) OLN, 22 of 42 (52.3%) showed long level OPLL (p=0.01). Conclusion : There was significant relationship between OLN and OPLL prevalence. This correlation indicates that there might be common systemic causes as well as mechanical causes in the formation of OPLL and OLN. The incidentally detected OLN in cervical lateral radiograph, especially larger type, might be helpful to predict the possibility of cervical OPLL.

• Korean Journal of Veterinary Research
• /
• v.28 no.2
• /
• pp.221-226
• /
• 1988

Normal swine brains at 1 to 70 days after birth were used to investigate the presence and morphology of the subependymal layer (SL) in the ventricle walls. The brain samples were taken from 27 pigs of 4 swine breeds. The results were summarized as follows: 1. SLs were observed on the walls of the lateral ventricle (LV) but none were observed on the walls of the 3th and 4th ventricles. 2. SLs of the LV walls were composed of mainly 3-to 10-cell layers in thickness. The thinest region of SLs was composed of only 1-to 2-cell thick on the dorsal and ventral walls, and the thickest region was composed of 250-to 300-cell thick on extension region of the SLs into the angle between the corpus callosum and caudate nucleus. 3. Of the LV parts observed, the SL thickness were 25-to 45-cell thick on the anterior horn, 3-to 10-cell thick on the body, 100-to 220-cell thick on the angle region between the corpus callosum and caudate nucleus, and 3-to 5-cell thick the superior walls of the posterior horn. Also the SL thickness was more thick on the anterior region than those on the posterior region. 4. SLs may be classified as three types by the cell distribution; one type of them is closely arranged cell region with the distinctive lateral margin from the periventricular white matter, the other type is loosely arranged cell region with the undistinctive lateral margin, and another type is two-subdivided region as the loosely and closely arranged cell layers in a layer. 5. SLs were extensively thick in young age but gradually decreased in size and cell number with age after 20-day age. SL layers were composed of mainly oligodendrocytes, astrocytes and immature cells of them. Morphological differences of SL in different breeds of pigs were not observed.

• Journal of Oral Medicine and Pain
• /
• v.24 no.1
• /
• pp.37-47
• /
• 1999

This study was performed to investigate the factors related to vibration of temporomandibular joint during mandibular opening movement. For this study, 144 patients with temporomandibular disorders were randomly selected. Angle's classification, lateral guidance pattern, range of maximal mouth opening, preferred chewing side, and affected side were investigated clinically. Mandibular torque rotational movement during opening was recorded with $BioEGN^{(R)}$ and vibration of temporomandibular joint during opening was recorded with $Sonopak^{(R)}$. After clinical diagnosis was made, visual analogue scale(VAS) was used for evaluation of clinical progress of the subject's chief complaints. The author calculated VAS treatment index(VAS Ti) from the record of VAS. The more VAS Ti was, the less remission of subjective symptom was, The data were analyzed with SAS/Stat program and the results of this study were as follows: 1. There were no significant difference in all the variables of joint vibration by age and sex. 2. Integral and peak amplitude in patients of Angle's class I were higher than those of class II or III patients. Integral in patients of group function was higher than that in patients of canine guidance or other types of lateral excursion. 3. As to Angle's classification or lateral guidance type, there were almost not significant difference between subgroup of same class or type and subgroup of different class or type on both sides. And there were also almost not difference between one side and the other side related to preferred chewing side or affected side. 4. Patients with disk displacement with reduction showed higher value of integral and peak amplitude than any other patients. 5. Joint vibration variables significantly correlated with VAS Ti of pain. with clinical range of mouth opening, and with ingredients of mandibular torque rotational movement.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.40 no.1
• /
• pp.11-16
• /
• 2014

Objectives: The aim of this study was to evaluate the pattern of lingual split line when performing a bilateral sagittal split osteotomy (BSSO) for asymmetric prognathism. This was accomplished with the use of cone-beam computed tomography (CBCT) and three-dimensional (3D) software program. Materials and Methods: The study group was comprised of 40 patients (20 males and 20 females) with asymmetric prognathism, who underwent BSSO (80 splits; n=80) from January 2012 through June 2013. We observed the pattern of lingual split line using CBCT data and image analysis program. The deviated side was compared to the contralateral side in each patient. To analyze the contributing factors to the split pattern, we observed the position of the lateral cortical bone cut end and measured the thickness of the ramus that surrounds the mandibular lingula. Results: The lingual split patterns were classified into five types. The true "Hunsuck" line was 60.00% (n=48), and the bad split was 7.50% (n=6). Ramal thickness surrounding the lingual was $5.55{\pm}1.07$ mm (deviated) and $5.66{\pm}1.34$ mm (contralateral) (P =0.409). The position of the lateral cortical bone cut end was classified into three types: A, lingual; B, inferior; C, buccal. Type A comprised 66.25% (n=53), Type B comprised 22.50% (n=18), and Type C comprised 11.25% (n=9). Conclusion: In asymmetric prognathism patients, there were no differences in the ramal thickness between the deviated side and the contralateral side. Furthermore, no differences were found in the lingual split pattern. The lingual split pattern correlated with the position of the lateral cortical bone cut end. In addition, the 3D-CT reformation was a useful tool for evaluating the surgical results of BSSO of the mandible.

• Structural Engineering and Mechanics
• /
• v.76 no.3
• /
• pp.279-291
• /
• 2020

The seismic design of conventional frame structures is meant to enhance plastic deformations at beam ends and prevent yielding in columns. To this end, columns are made stronger than beams. Yet yielding in columns cannot be avoided with the column-to-beam strength ratios (about 1.3) prescribed by seismic codes. Preventing plastic deformations in columns calls for ratios close to 4, which is not feasible for economic reasons. Furthermore, material properties and the rearrangement of geometric shapes inevitably make the distribution of damage among stories uneven. Damage in the i-th story can be characterized as the accumulated plastic strain energy (W_pi) normalized by the product of the story shear force (Q_yi) and drift (δ_yi) at yielding. Past studies showed that the distribution of the plastic strain energy dissipation demand, W_pi/ΣW_pj, can be evaluated from the deviation of Q_yi with respect to an "optimum value" that would make the ratio W_pi/(Q_yiδ_yi) -i.e. the damage- equal in all stories. This paper investigates how the soil type and ductility demand affect the optimum lateral strength distribution. New optimum lateral strength distributions are put forth and compared with others proposed in the literature.

• The Journal of the Korea Contents Association
• /
• v.22 no.9
• /
• pp.426-438
• /
• 2022

The current study explored the relative effects of reciprocal/empathic type on messages appealing to help patients with Lou Gehrig's disease and their family. By this, we attempted to examine the applicable scope of the reciprocal type, a way of appealing rationally in the delivery of helping messages. The focus was on the moderation of empathic concern trait, a representative altruistic personality. Conducted as the online experiment, empathic concern trait was measured in the first stage, and the helping messages presented each by reciprocal/empathic type were shown and evaluated in the second stage after about 7 days. The data of 134 people were finally analyzed, excluding insincere participants. As a result, the relative advantage of empathic type was shown, but it was only limited to the subject attitude. In the result of the interaction, the reciprocal type were as much or more influential as the empathic type for the individuals high in empathic concern trait.

• Earthquakes and Structures
• /
• v.11 no.4
• /
• pp.609-627
• /
• 2016

Results of an experimental program are presented in this paper for the influence of vertical load on the in-plane behavior of masonry infilled steel frames. Five half-scaled single-story, single-bay steel frame specimens were tested under cyclic lateral loading. The specimens included four infilled frames and one bare frame. Two similar specimens as well as the bare frame had moment-resisting steel frames, while the remaining two specimens had pinned steel frames. For each frame type, one specimen was tested under simultaneous vertical and lateral loading, whereas the other was subjected only to lateral loading. The experimental results show that the vertical load changes the cracking patterns and failure modes of the infill panels. It improves dissipated hysteresis energy and equivalent viscous damping. Global responses of specimens, including stiffness and maximum strength, do no change by vertical loading considerably. Regarding the ductility, the presence of vertical load is ignorable in the specimen with moment-resisting frame. However, it increases the ductility of the infilled pinned frame specimen, leading to an enhancement in the m-factor by at least 2.5 times. In summary, it is concluded that the influence of the vertical load on the lateral response of infilled frames can be conservatively ignored.