• Smart Structures and Systems
• /
• v.20 no.5
• /
• pp.549-562
• /
• 2017

The US railroad network carries 40% of the nation's total freight. Railroad bridges are the most critical part of the network infrastructure and, therefore, must be properly maintained for the operational safety. Railroad managers inspect bridges by measuring displacements under train crossing events to assess their structural condition and prioritize bridge management and safety decisions accordingly. The displacement of a railroad bridge under train crossings is one parameter of interest to railroad bridge owners, as it quantifies a bridge's ability to perform safely and addresses its serviceability. Railroad bridges with poor track conditions will have amplified displacements under heavy loads due to impacts between the wheels and rail joints. Under these circumstances, vehicle-track-bridge interactions could cause excessive bridge displacements, and hence, unsafe train crossings. If displacements during train crossings could be measured objectively, owners could repair or replace less safe bridges first. However, data on bridge displacements is difficult to collect in the field as a fixed point of reference is required for measurement. Accelerations can be used to estimate dynamic displacements, but to date, the pseudo-static displacements cannot be measured using reference-free sensors. This study proposes a method to estimate total transverse displacements of a railroad bridge under live train loads using acceleration and tilt data at the top of the exterior pile bent of a standard timber trestle, where train derailment due to excessive lateral movement is the main concern. Researchers used real bridge transverse displacement data under train traffic from varying bridge serviceability levels. This study explores the design of a new bridge deck-pier experimental model that simulates the vibrations of railroad bridges under traffic using a shake table for the input of train crossing data collected from the field into a laboratory model of a standard timber railroad pile bent. Reference-free sensors measured both the inclination angle and accelerations of the pile cap. Various readings are used to estimate the total displacements of the bridge using data filtering. The estimated displacements are then compared to the true responses of the model measured with displacement sensors. An average peak error of 10% and a root mean square error average of 5% resulted, concluding that this method can cost-effectively measure the total displacement of railroad bridges without a fixed reference.

• The Journal of Korean Academy of Prosthodontics
• /
• v.58 no.3
• /
• pp.228-238
• /
• 2020

In order to deliver fixed partial denture to a patient successfully, dentist must take into many considerations beforehand. Patient's occlusal pattern should be fully understood before delivering any type of prosthesis, whether it's canine guidance or group function occlusion. In order to do so, movement of mandible should be recorded precisely. Introduced by Meyers in 1933, functionally generated path technique (FGP) has been successfully used to record mandibular movement with various materials, such as wax, and utilize it in fabricating precise prosthesis. In the following cases, patients showed secondary caries or endodontic-periodontic lesion on maxillary molars. Root canal treatment and subgingival curettage were done for each patient. Since the long term prognosis of each tooth was questionable, lateral force should be minimized. In order to do so, FGP technique was used to record mandibular movements precisely. Instead of using conventional plaster impression, intra-oral scanning of wax tracing was done to fabricate prosthesis efficiently. After delivery of fixed partial denture, favorable outcome was obtained.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.25 no.1
• /
• pp.127-133
• /
• 1998

An impacted tooth is defined pathologically as a tooth that remains under the mucosa of inside bone without eruption of the crown after a specific period of eruption. Clinically, the term includes those teeth, even before eruption period, that are not expected to erupt due to shape, position and alignment of tooth and lack of space. Canine is prone to impaction more than other teeth because it has the longest time to develop and a complex route from the place of formation to the site of eruption. The impaction incidence of maxillary canine is repoted 0.92$\sim$3.3% (Ferguson, 1990). In 1995 Orton reported that the incidence was 0.92$\sim$2.2% and palatal impaction was more frequent than labial impaction(85%:15%). In 1969 Johnston presented it was more common to woman than to man(3:1). The etiology includes systemic disease such as endocrine disorder, cleidocranial dysostosis, irradiation, Crouzon syndrome, ricketts, facial hemihypertrophy and hereditary and local problems such as ectopic position of the tooth, distance of tooth from its place of eruption, malformation of the tooth, presence of supernumerary teeth, trauma of tooth germ, infection of tooth germ, displacement of tooth germ or tooth by a neoplasm, ankylosis, overretention of deciduous predecessor, lack of space for the tooth in the dental arch and mucosal barrier due to gingival fibrosis. The maxillary canine is especially important as it has the longest root, provides guidance for lateral movement of the mandible and masticatory function and assumes an important role esthetically as it is located at mouth angle. If left untreated, it may cause migration and external, internal resorption of adjacent teeth, loss of arch length, formation of dentigerous cyst or tumors, infection and referred pain as well as malposition of the tooth. Therefore, periodic examination of the development and eruption of the maxillary canine is especially important in a growing child. This case study presents the results of treatment of palatally impacted maxillary canine utilizing surgical exposure and orthodontic tooth movement on patients visiting SNUDH dept. of pediatric dentistry.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.525-530
• /
• 2005

Maxillary median diastema is the term used when there is spacing between maxillary central incisors. The space between maxillary central incisors are often observed during ugly duckling stage. In most of the cases, as maxillary permanent canines erupt, it gradually disappears. Maxillary median diastema needs to be treated when there is up to 2mm of space between the incisors even after eruption of permanent canines or when there is 3mm of space, at least, before the eruption of the canines. Particulary, for the latter case, orthodontic treatment is recommended because not only the esthetic point of view but also to regain the eruption space for maxillary lateral incisors and canines. The appliance used for orthodontic treatment are removable appliances, using finger spring and etc, and fixed appliances, using rubber elastics and coil spring. If rubber band alone was used to treat median diastema without any other appliance such as band, tube or bracket, it will gradually move downward along the root surface. Then it will destroy the peridontal ligament and causes tooth mobility, extrusion, and avulsion. This report presents cases of damaged tooth due to improper use of rubber band when treating maxillary median diastema.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.130-135
• /
• 2010

Ectopic eruption is caused by an abnormal direction of eruptive path, most common in maxillary first molar, mandibular lateral incisor, and maxillary canine, and sometimes mandibular first molar. Ectopic eruption of first molar leads to abnormal root resorption of second deciduous molar, which, if left untreated, could cause premature loss of second deciduous molar; mesial tilting and rotation of first permanent molar; lack of space for eruption of second premolar; and occlusal problems. Therefore early treatment is advised when diagnosed as ectopic eruption. Treatment of ectopic eruption in the first permanent molar involves providing proper guidance for the direction of eruption using interproximal wedging and distal tipping methods while preserving second deciduous molar. This case report shows satisfactory results of the ectopic eruption of mandibular first molars in young patients who were treated with Humphrey appliance and Halterman appliance.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.40 no.2
• /
• pp.106-117
• /
• 2013

Normal eruption of the canine is important for the transition to the permanent dentition. Etiologies, including premature loss or delayed retention of deciduous teeth, neoplasm and abnormality of lateral incisor can cause impaction of the maxillary canine. Untreated canine impaction can result in malocclusion, cyst formation and obstacles in orthodontic treatment. The aim of this study is to evaluate location of the impacted maxillary canine and to identify correlation between location and management of the impaction including complications. Using panoramic radiographs and CBCT scan, images of 89 children diagnosed with impaction of the maxillary canine, location of impacted canines was evaluated. The choice of treatment and complications were investigated to identify correlation. Results show that the most commonly impacted location of the maxillary canine was in the mid-alveolar area, followed by buccal side and palatal side. Orthodontic traction was selected more frequently than the other treatments. As complications, displacement of adjacent tooth was occurred most frequently. Buccally impacted canines showed increased tendency towards displacement. The more buccally the canine was impacted, the less orthodontic traction was chosen as the treatment. The canine impacted mesially to the central incisor showed increased tendency to occur root resorption. Therefore, early diagnosis by periodic examination, appropriate treatment and intervention is required.

• Journal of Ginseng Research
• /
• v.30 no.4
• /
• pp.206-211
• /
• 2006

To investigate mycorrhizal infection by arbuscular mycorrhizal fungi(AMF), samples of fine lateral roots were taken from the wild ginseng(Panax ginseng C.A. Meyer) naturally growing at various locations in Korea. Mycorrhiazal infections were studied by cleaning the root samples and staining fungal hyphae with frypan blue. Wild ginsengs for this study were graded by an appraisal committee consisting of 12 experts of Korea Mountain Ginseng Association. Following five quality groups were recognized: Heaven group(pure natural), Earth group (from seeding of wild ginseng), Man group(from seeding or seedlings of wild ginseng with slight environmental modification), unmarketable, and imported wild ginseng. Morphology of AMF was typical Paris-type which shows intracellular hyphal coils with rare vesicles and lack of arbuscules. Average infection rate of individual wild ginsengs was 58.3% and showed no differences among five quality groups. When portions of fine roots were quantified for mycorrhizal infection, 18.7% of the total length of the primary and secondary roots were infected by AMF. Wild ginsengs from Gyeonggi Province(84.2%), and from mountains lower than 1,200 meters above sea level(about 70%) showed higher infection rate, while the ginseng from Gyeongbuk Province(27.8%) had lower rate. Wild ginsengs at older age showed lower infection rates.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.803-812
• /
• 2018

The purpose of this study is to develop Particle Swarm Optimization (PSO) automatic calibration algorithm with multi-objective functions by Python, and to evaluate the applicability by applying the algorithm to the Soil and Water Assessment Tool (SWAT) watershed modeling. The study area is the upstream watershed of Gongdo observation station of Anseongcheon watershed ($364.8km^2$) and the daily observed streamflow data from 2000 to 2015 were used. The PSO automatic algorithm calibrated SWAT streamflow by coefficient of determination ($R^2$), root mean square error (RMSE), Nash-Sutcliffe efficiency ($NSE_Q$), and especially including $NSE_{INQ}$ (Inverse Q) for lateral, base flow calibration. The results between automatic and manual calibration showed $R^2$ of 0.64 and 0.55, RMSE of 0.59 and 0.58, $NSE_Q$ of 0.78 and 0.75, and $NSE_{INQ}$ of 0.45 and 0.09, respectively. The PSO automatic calibration algorithm showed an improvement especially the streamflow recession phase and remedied the limitation of manual calibration by including new parameter (RCHRG_DP) and considering parameters range.

• Korean Journal of Plant Tissue Culture
• /
• v.28 no.2
• /
• pp.103-108
• /
• 2001

The in vitro plantlets of cassava (Manihot esculenta Crantz cv. MColl 22) could be regenerated from nodal explant cultures in a liquid MS basal medium containing 0.01 mg/L zeatin for 2 weeks. The plantlets of 1.5∼2.5 cm in shoot length were transplanted to a glass bottle containing fine sand and acclimated under non-sterile conditions after excising their intact roots by: 1) prune leaving roots base of 1∼1.5 cm; 2) complete removal of roots; and 3) cutting off the rooting zone. The majority of in vitro-formed intact roots continued growth after transferred to soil, and all of the damaged roots stopped further growth. The plantlets with excised roots began to develop new roots within 7∼10 days after being transferred to a glass bottle, and a few of the pruned roots developed lateral roots from the remaining portion. Pruning and removal of in vitro roots resulted in a high survival rate (>87%), and did not significantly affect ex vitro root regeneration and acclimation, but the plantlets in which the rooting zone had been cut-off showed 73% survival rate. Pruning or removal of in vitro roots before transfer of plantlets is recommended for useful method of commercial micropropagation because of easier handling and high survival rate of plantlets.

• Current Research on Agriculture and Life Sciences
• /
• v.26
• /
• pp.71-79
• /
• 2008

It is known that the content of asparagine, an excellent detoxifying substance of alcohols in human body, is the highest in the roots of soy-sprout. At the same time, it is inferred that soy-sprouts producing more roots are better for detoxifying. In this experiment, the effects of room temperatures on number of watering per day, and duration of soy-sprout culture were carefully investigated. Some of the results obtained are as follows; 1. The yield rate of soy-sprouts for Agakong and Pungsannamulkong was continuously increased up to 9 days. It was higher in room temperature of $30^{\circ}C$ than in $20^{\circ}C$ and was the highest at 8th day of culture with 5 times of watering per day. 2. The asparagine content in soy-sprouts of Agakong and Pungsannamulkong was the highest in cotyledon and the lowest in roots. This rate was higher in the room temperature of $20^{\circ}C$ than in $30^{\circ}C$. 3. The highest asparagine content of soy-sprout of Agakong was 18.9%, obtained in the room temperature of $30^{\circ}C$, cultivated for 8 days with 5 times of watering per day. 4. The highest asparagine content of Pungsannamulkong was 18.8%, obtained in hypocotyl cultivated in the room temperature of $30^{\circ}C$ for 8 days with the number of 2 times watering per day. 5. When an cultivation apparatus of 5 liters volume was used, the optimum seed amount for the highest yield rate was 300g for Agakong and 500g for Pungsannamulkong. At the same time, the number of lateral roots showed increasing tendency with more amounts of soybean seeds used.