• Horticultural Science & Technology
• /
• v.31 no.6
• /
• pp.828-832
• /
• 2013

To report country-specific carbon and nitrogen stocks data in a pear orchard by Tier 3 approach of 2006 IPCC guidelines for national greenhouse gas inventories, an experimental pear orchard field of the Pear Research Station, National Institute of Horticultural & Herbal Science, Rural Development Administration, Naju, Korea ($35^{\circ}01^{\prime}27.70N$, $126^{\circ}44^{\prime}53.50^{\prime\prime}E$, 6 m altitude), where 15-year-old 'Niitaka' pear (Pyrus pyrifolia Nakai cv. Niitaka) trees were planted at a $5.0m{\times}3.0m$ spacing on a Tatura trellis system, was chosen to assess the total amount of carbon and nitrogen stocks stored in the trees and orchard soil profiles. At the sampling time (August 2012), three trees were uprooted, and separated into six fractions: trunk, main branches, lateral branches (including shoots), leaves, fruits, and roots. Soil samples were collected from 0 to 0.6 m depth at 0.1 m intervals at 0.5 m from the trunk. Dry mass per tree was 4.7 kg for trunk, 13.3 kg for main branches, 13.9 kg for lateral branches, 3.7 kg for leaves, 6.7 kg for fruits, and 14.1 kg for roots. Amounts of C and N per tree were respectively 2.3 and 0.02 kg for trunk, 6.4 and 0.07 kg for main branches, 6.4 and 0.09 kg for lateral branches, 6.5 and 0.07 kg for roots, 1.7 and 0.07 kg for leaves, and 3.2 and 0.03 kg for fruits. Carbon and nitrogen stocks stored between the soil surface and a depth of 60 cm were 138.29 and $13.31Mg{\cdot}ha^{-1}$, respectively, while those contained in pear trees were 17.66 and $0.23Mg{\cdot}ha^{-1}$ based on a tree density of 667 $trees{\cdot}ha^{-1}$. Overall, carbon and nitrogen stocks per hectare stored in a pear orchard were 155.95 and 13.54 Mg, respectively.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.202-213
• /
• 2008

Objective: The purpose of this study was to compare the cephalometric measurements of obese and non-obese Korean male patients with obstructive sleep apnea syndrome (OSA). Methods: Eighty-seven adults who had visited the Sleep Disorder Clinic Center in Keimyung University, Daegu, Korea were examined and evaluated with polysomnography (PSG) and lateral cephalogram. They were divided into 4 groups (non-obese simple snorers, obese simple snorers, non-obese OSA patients, obese OSA patients) according to AHI (Apnea-Hypopnea Index) and BMI (Body Mass Index). Results: The obese OSA group had the highest AHI among the 4 groups. The non-obese OSA group had a significantly steeper mandibular angle and shorter tongue length than the obese OSA group. The hyoid bone of the obese OSA group was positioned anterior and inferior as compared with the non-obese OSA group. Multiple regression analysis showed that tongue length in the obese OSA group and retroposition of hyoid bone in the non-obese OSA group were significant determinants for the severity of AHI. Conclusions: From a cephalometric point of view, the obese and non-obese pateints with OSA may be characterized by different pathogeneses. Therefore, they have to be managed by individualized treatment. For the obese OSA patients, weight control must be advised as a first choice and for the non-obese OSA patients, oral appliance, nasal CPAP, UPPP and others could be chosen according to the obstructive sites.

• Korean Journal of Head & Neck Oncology
• /
• v.16 no.1
• /
• pp.64-68
• /
• 2000

Objectives: With the recent advances and increasing use of imaging techniques in examination of the neck, the incidence of incidentally discovered thyroid carcinoma has been increasing. This study was carried out to evaluate the clinicopathologic characteristics of incidental thyroid carcinomas and to find optimal therapeutic strategies for these lesions. Materials & Methods: From Jan. 1988 to Aug. 1998, 1,053 patients were operated on for thyroid cancer, of whom 127(12.1%) had incidentally discovered thyroid cancers which were identified during routine health checkups(n=40), diagnostic procedures for unrelated medical conditions(n=39) and mass screening for thyroid cancer(n=48). The preoperative diagnosis was obtained by ultrasound-guided FNAB and the extent of surgery was determined based on frozen section examinations, as well as prognostic factors and gross findings at the time of surgery. Results: There were 6 men and 121 women with a mean age of 45.9 years. Histopathological diagnosis included papillary carcinomas(n=1l9), follicular carcinomas(n=6), poorly differentiated carcinoma(n=l) and medullary carcinoma(n=1). Thirty patients(23.6%) had multifocallesions. The mean diameter of the tumors was 1.1 cm(0.2-3.4 cm). Capsular invasions were found in 53 patients(41.7%) and nodal metastases in 41(32.3%). The surgical procedures used were: 90 less-than total thyroidectomies and 37 total thyroidectomies with central neck node dissection. Lateral neck dissection was added in 5 patients. According to TNM staging, 79 patients(63.2%) were at stage I, 15(12.0%) at stage II, 31(24.8%) at stage III and 0(0.0%) at stage IV. By AMES scoring system, 102 patients(81.6%) were in the low-risk group and 23(18.4%) in the high-risk group. And by MACIS scoring system, 103(86.6%) of 119 papillary thyroid cancer patients were less than 6. Conclusions: The clinicopathological characteristics of incidentally discovered thyroid carcinomas are similar to ordinary thyroid carcinomas. The treatment of choice should be individualized based on the particular clinical situation encountered, as in ordinary thyroid carcinomas.

• Journal of Korean Foot and Ankle Society
• /
• v.8 no.1
• /
• pp.22-25
• /
• 2004

Purpose: The heel fat pad has a unique structure that is important for its shock absorbing function. Loss of elasticity and change in the thickness of the heel pad have been suggested as cause of heel pain. The present study shows the relationship between the thickness of heel fat pad and age, sex, obesity and plantar heel pain. Materials and Methods: A study of heel pad thickness using plain lateral radiographs, unloaded by body weight, was carried out on 66 patients with plantar heel pain and 326 normal subjects. The population was divided into two or three groups according to their age, sex, body mass index, and the presence of symptom. We evaluated the differences in heel pad thickness between groups, and the relationship between BMI and Sex and Age was also determined, using statistically analytic method by SPSS version 10.1 program. Results: Heel pad thickness was greater in the subject over 40 years old (p<0.001), and in the overweight (p<0.001), and male heel pad was thicker than female (p<0.001). But there was no statistically significant difference for heel pad thickness between normal subject and plantar heel pain group. Conclusion: In this study, we found that there is a relationship between heel pad thickness and age, sex, and obesity. But we could not show that the difference of heel pad thickness is contributing factor to plantar heel pain. Although it could not be proved statistically, we believe that a change of heel pad thickness play a role in the development of heel pain. So we are planning to assess a relationship of heel pad elasticity and thickness and plantar heel pain again with prospective study method on the basis of the results of this study.

• Transactions of the Korean hydrogen and new energy society
• /
• v.25 no.6
• /
• pp.648-655
• /
• 2014

This paper describes the continuing effort to develope a single acting free-piston Stirling engine/alternator combination for use of the household cogeneration. Free piston Stirling engines(FPSE) use variations of working gas pressure to drive mechanically unconstrained reciprocating elements. Stirling cycle free-piston engines are driven by the Stirling thermodynamic cycle which is characterized by an externally heated device containing working gas that is continuously re-used in a regenerative, reversible cycle. The ideal cycle is described by two isothermal process connected by two constant volume processes. Heat removed during the constant volume cooling process is internally transferred to the constant volume heating process by mutual use of a thermal storage medium called the regenerator. Since the ideal cycle is reversible, the ideal efficiency is that of Carnot. Free-piston Stirling engine is have no crank and rotating parts to generate lateral forces and require lubrication. The FPSE is typically comprised of two oscillating pistons contained in a common cylinder. The temperature difference across the displacer maintains the oscillations, and the FPSE operate at natural frequency of the mass-spring system. The power is generated from a linear alternator. The purpose of this paper is to describe the design process of the single acting free-piston Stirling engine/alternator. Electrical output of the single acting free-piston Stirling engine/alternator is about 0.95 kW.

• Archives of Plastic Surgery
• /
• v.38 no.6
• /
• pp.894-898
• /
• 2011

Purpose: Coverage of full-thickness large flank defect is a challenging procedure for plastic surgeons. Some authors have reported external oblique turnover muscle flap with skin grafting, inferiorly based rectus abdominis musculocutaneous flap, and two independent pedicled perforator flaps for flank reconstruction. But these flaps can cover only certain portions of the flank and may not be helpful for larger or more lateral defects. We report a case of large flank defect after resection of extraskeletal Ewing's sarcoma which is successfully reconstructed with reverse latissimus dorsi myocutaneous flap. Methods: A 24-year-old male patient had $13.0{\times}7.0{\times}14.0$ cm sized Ewing's sarcoma on his right flank area. Department of chest surgery and general surgery operation team resected the mass with 5.0 cm safety margin. Tenth, eleventh and twelfth ribs, latissimus dorsi muscle, internal and external oblique muscles and peritoneum were partially resected. The peritoneal defect was repaired with double layer of Prolene mesh by general surgeons. $24{\times}25$ cm sized soft tissue defect was noted and the authors designed reverse latissimus dorsi myocutaneous flap with $21{\times}10$ cm sized skin island on right back area. To achieve sufficient arc of rotation, the cephalic border of the origin of latissimus dorsi muscle was divided, and during this procedure, ninth intercostal vessels were also divided. The thoracodorsal vessels were ligated for 15 minutes before divided to validate sufficient vascular supply of the flap by intercostal arteries. Results: Mild congestion was found on distal portion of the skin island on the next day of operation but improved in two days with conservative management. Stitches were removed in postoperative 3 weeks. The flap was totally viable. Conclusion: The authors reconstructed large soft tissue defect on right flank area successfully with reverse latissimus dorsi myocutaneous flap even though ninth intercostal vessel that partially nourishes the flap was divided. The reverse latissimus dorsi myocutaneous flap can be used for coverage of large soft tissue defects on flank area as well as lower back area.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.12
• /
• pp.1805-1810
• /
• 2010

We present a simple, cost-effective, and fast fabrication process for three-dimensional (3D) microstructures; this process is based on multi-step electrochemical etching of metal foils which facilitates the mass production of 3D microstructures. Compared to electroplating, this process maintains uniform and well-controlled material properties of the microstructure. In the experimental study, we perform single-step electrochemical etching of aluminum foils for the fabrication of 2D cantilever arrays. In the single-step etching, the depth etch rate and bias etch rate are measured as $1.50{\pm}0.10 {\mu}m/min$ and $0.77{\pm}0.03 {\mu}m/min$, respectively. Using the results of single-step etching, we perform two-step electrochemical etching for 3D microstructures with probe tips on cantilevers. The errors in height and lateral fabrication in the case of the fabricated structures are $15.5{\pm}5.8% $ and $3.3{\pm}0.9%$, respectively; the surface roughness is $37.4{\pm}9.6nm$.

• Pediatric Infection and Vaccine
• /
• v.18 no.1
• /
• pp.80-84
• /
• 2011

Empyema necessitatis refers to empyema that extends into the extrapleural space through a defect in the pleural surface. Tuberculous empyema necessitatis is a rare complication of tuberculosis. We experienced a 21-month-old boy with tuberculous empyema necessitatis with osteomyelitis in the right $7^{th}$ rib. He presented with a mass on the right lateral chest wall, which was soft and nontender, enlarging for one month. He also had mild fever. The plain radiograph of his chest revealed soft tissue swelling and calcified lymph node on the left axilla, and his PPD skin test was positive. CT scan of the chest showed empyema necessitatis at the right lower chest and upper abdominal walls with osteomyelitis of the right $7^{th}$ rib. He did not have concurrent pulmonary tuberculosis. Surgery was performed for diagnosis and treatment. In histopathologic findings, chronic granulomatous inflammation with caseation necrosis was shown and was positive for acid fast bacilli stain. In addition, M. tuberculosis complex was found as etiology by polymerase chain reaction. The patient has been treated with anti-tuberculous medication without any specific complication.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.2
• /
• pp.224-231
• /
• 2020

The purpose of this study was to analyze the effect of ankle joint taping treatment on lower extremity joint and center of pressure(COP) factors during the Uchi-mata. Twenty college judo athletes (age, 20.9 ± 0.8 years; height, 168.6 ± 7.4cm; weight, 73.5 ± 11.6kg; body mass index, 25.7 ± 2.6kg/㎡) participated, and two types before and after ankle joint taping treatment when the during the Uchi-mata was exhibited under conditions, the angle and COP factors of the support leg joints were analyzed to show the following results. At the time of E2 (t = 2.411, p = .027) E4 (t = 2.388, p = .029), the ankle joint angle was statistically less after the treatment than before the taping treatment, and E2 (t = -2.343, p = .032) At E3 (t = -4.531, p = .000), the angle of the hip joint was statistically large. And after the ankle joint taping treatment, the medial/lateral COP movement after the ankle joint taping treatment was statistically large in the P3 phase of throwing the opponent (t = 2.670, p = .016), and the anterior/posterior COP movement showed a statistically small number in the P1 phase where the opponent was tilted (t = 2.846, p = .011). Therefore, it was suggested that judo athletes who use thighs as a special technique should be used considering the movement function of the support joint and the range of movement of the COP caused by tapping of the ankle joint.

• Korean Journal of Applied Biomechanics
• /
• v.16 no.3
• /
• pp.137-148
• /
• 2006

The purpose of this study was to compare muscle activity in the lower extremity during walking wearing jogging and roller shoes. Twelve male middle school students (age: 15.0 yrs, height 173.7 cm, weight 587.7 N) who have no known musculoskeletal disorders were recruited as the subjects. Seven pairs of surface electrodes (QEMG8, Laxtha Korea, gain = 1,000, input impedance >$1012{\Omega}$, CMMR >100 dB) were attached to the right-hand side of the body to monitor the rectus femoris (RF), vastus medialis (VM), vastus lateralis (VL), biceps femoris (BF), tibialis anterior (TA), and medial (GM) and lateral gastrocnemius (GL) while subjects walked wearing roller and jogging shoes in random order at a speed of 1.1 m/s. An event sync unit with a bright LED light was used to synchronize the video and EMG recordings. EMG data were filtered using a 10 Hz to 350 Hz Butterworth band-passdigital filter and further normalized to the respective maximum voluntary isometric contraction EMG levels. For each trial being analyzed, five critical instants and four phases were identified from the recording. Averaged IEMG and peak IEMG were determined for each trial. For each dependent variable, paired t-test was performed to test if significant difference existed between shoe conditions (p<.05). The VM, TA, BF, and GM activities during the initial double limb stance and the initial single limb stance reduced significantly when going from jogging shoe to roller shoe condition. The decrease in EMG levels in those muscles indicated that the subjects locked the ankle and knee joints in an awkward fashion to compensate for the imbalance. Muscle activity in the GM for the roller shoe condition was significantly greater than the corresponding value for the jogging shoe condition during the terminal double limb stance and the terminal single limb stance. Because the subjects tried to keep their upper body weight in front of the hip to prevent falling backward, the GM activity for the roller shoe condition increased. It seems that there are differences in muscle activity between roller shoe and jogging shoe conditions. The differences in EMG pattern may be caused primarily by the altered position of ankle, knee, and center of mass throughout the walking cycle. Future studies should examine joint kinematics during walking with roller shoes.