• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1032-1039
• /
• 2010

Based on the proven feasibility of bottom ash and tire shred-soil mixtures as lightweight fill materials, tire shred-bottom ash mixtures were suggested as a new lightweight fill material to replace the conventional construction material with bottom ash. Therefore, we carried out the laboratory test, field compaction test and performance test of large scale embankment in order to evaluate their suitability for the use of lightweight fill materials in the before studies. We could verified that the ash, tire-shred and the mixture are able to be the useful materials as light fill materials. In this study, we built real scale embankment with RBA(Reclamated Bottom Ash), TRBA(Tire shred-Reclamated Bottom Ash mixture), WS(Weathered Soil), BA(Bottom Ash screened by 5mm sieve) for monitoring the behavior such as settlement, lateral displacement and water content change. Furthermore, we are examining the ground water quality in the surrounding area of the test embankment.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.838-845
• /
• 2006

Recently construction work in Korea, demands of favorable condition ground had been increased with industrialization acceleration and economic growth. However, because of limited land space, it was so hard to ensure favorable condition grounds that construction work proceeds until soft ground area on plans of road, railroad and industrial complex. In this case, soft ground improvement was required such as a stone column method. Stone column method, making a compaction pile using crushed stone, is a soft ground improvement method. However, stone column method is difficult to apply to the ground which is not mobilized enough lateral confine pressure because no bulging failure resistance. Hence, in present study, evaluates the stone columns reinforced by geogrid for settlement reduction and wide range of application of stone columns. Triaxial compression tests were conducted for evaluation which is about behavior characteristics of stone column on replacement rate. Then, 3-dimensional numerical analysis were conducted for application of stone column reinforced by geogrid as evaluate behavior characteristics and settlement reduction effect of stone column reinforced by geogrid on reinforcing depth change of geogrid.

• Structural Engineering and Mechanics
• /
• 제60권4호
• /
• pp.655-665
• /
• 2016

This paper aims to develop models to accurately predict the behavior of fresh concrete exposed to vibration using artificial neural networks (ANNs) model and regression model (RM). For this purpose, behavior of a full scale precast concrete mold was investigated experimentally and numerically. Experiment was performed under vibration with the use of a computer-based data acquisition system. Transducers were used to measure time-dependent lateral displacements at some points on mold while both mold is empty and full of fresh concrete. Modeling of empty and full mold was made using both ANNs and RM. For the modeling of ANNs: Experimental data were divided randomly into two parts. One of them was used for training of the ANNs and the remaining part was used for testing the ANNs. For the modeling of RM: Sinusoidal regression model equation was determined and the predicted data was compared with measured data. Finally, both models were compared with each other. The comparisons of both models show that the measured and testing results are compatible. Regression analysis is a traditional method that can be used for modeling with simple methods. However, this study also showed that ANN modeling can be used as an alternative method for behavior of fresh concrete exposed to vibration in precast concrete structures.

• 한국어류학회지
• /
• 제21권2호
• /
• pp.81-86
• /
• 2009

한국산 동자개 Pseudobagrus fulvidraco의 정세포변형과 성숙한 정자의 미세구조를 주사 및 투과전자현미경으로 관찰하였다. 정세포변형은 측면에서 발생되는 편모, 핵의 회전, 염색물질로 채워진 핵의 함입과 핵와의 형성이 특징적이었다. 성숙한 정자의 구조는 첨체가 없는 둥근두부와 짧은중편 그리고 긴 편모로 구성되어 있었다. 짧은 중편에는 다수의 미토콘드리아가 있으며 cytoplasmic canal에 의하여 편모와 분리되어 있었다. 편모는 전형적인 9+2 구조이며 axonemal fins를 가지고 있었다. Axonemal fins는 동자개과에서 공통적으로 나타나는 형질로 여겨지며 그 외 다른 특징을 경골어류에서 비교하였다.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.161-165
• /
• 2015

Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.

• Restorative Dentistry and Endodontics
• /
• 제48권2호
• /
• pp.17.1-17.8
• /
• 2023

The present report describes the endodontic treatment of an Oehlers type II dens invaginatus in a maxillary lateral incisor with 5 root canals, an extremely rare condition. Apical periodontitis and related symptoms were noted. Cone-beam computed tomography was used to aid the diagnosis, reveal tooth morphology, and assist in canal location. The pulp chamber was carefully accessed, and the root canals were explored under magnification. All root canals were prepared with an R25 Reciproc Blue system and sodium hypochlorite (NaOCl) irrigation. After initial preparation, a self-adjusting file (SAF) with NaOCl and ethylenediaminetetraacetic acid was used to complement the disinfection. Additionally, calcium hydroxide medication was applied. Vertical compaction was used to fill the canals with a calcium silicate-based endodontic sealer and gutta-percha. After 12 months, the patient exhibited healing of the periapical region, absence of symptoms, and normal dental function. In conclusion, this nonsurgical treatment protocol was successful in promoting the cure of apical periodontitis. Both complementary disinfection with an SAF and use of calcium hydroxide medication should be considered when choosing the best treatment approach for dens invaginatus with very complex anatomy.

• Geomechanics and Engineering
• /
• 제38권2호
• /
• pp.191-203
• /
• 2024

One of the issues with clayey soils, particularly those with significant quantities of organic matter, is the creep settling problem. Clay soils can be strengthened using a variety of techniques, one of which is the use of stone columns. Prior research involved foundation loading when the soil beds were ready and confined in one-dimensional consolidation chambers. In this study, a particular methodology is used to get around the model's frictional resistance issue. Initially, specimens were prepared via static compaction, and they were then re-consolidated inside a sizable triaxial cell while under isotropic pressure. With this configuration, the confining pressure can be adjusted, the pore water pressure beneath the foundation can be measured, and the spacemen's lateral border may be freely moved. This paper's important conclusions include the observation that secondary settlement declines with area replacement ratio. Because of the composite ground's increasing stiffness, the length to diameter ratio (l/d) and the stone column to sample height ratio (Hc/Hs) both increase. The degree of improvement varies from 12.4 to 55% according to area replacement ratio and (l/d) ratio.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.67-76
• /
• 2016

교대는 토압을 받는 구조체로 뒤채움의 재질 및 부설방법, 다짐정도, 배수시설 등에 따라 교대에 미치는 영향이 민감한 구조물이다. 하지만 보통 실무에서는 경험치인 내부마찰값을 $30{\sim}35^{\circ}$를 적용하고 있는 실정으로 뒤채움재의 물성치값을 현실에 맞도록 합리적인 값의 설정이 필요하다고 할 수 있다. 본 논문에서는 교대높이 12m로 가정하고 직접기초의 교대를 최소안전율을 기반하여 절 성토 표준단면을 선정하여 내부마찰각의 변화에 따른 외적안정성분석와 부재력 검토하여 공사비를 비교하였다. 그 결과 내부마찰각에 따라 교대단면 축소 등으로 인한 공사비용 절감효과는 약 2.2%~8.4% 감소하였다.

• 한국지반신소재학회논문집
• /
• 제15권3호
• /
• pp.27-37
• /
• 2016

국내 GCP공법은 많은 선행연구가 진행되었으나, 설계자의 경험에 의해 의존하여 설계되고 있는 실정이므로 파괴사례가 종종 보고되고 있다. 이에 따라 명확한 파괴 원인규명 및 파괴예방대책 수립이 어려운 실정이다. 따라서 본 연구에서는 GCP공법의 합리적인 설계법의 제안을 위한 기초단계로써, GCP에 사용되는 최적배합비를 대형직접전단시험을 통해 결정하고, 내부마찰각의 변화에 따른 응력분담비의 변화 및 지반의 수직/수평 침하거동을 수치해석을 통하여 분석하였다. 직접전단 실험결과 쇄석과 모래의 최적배합비는 70:30으로 평가되었다. 수치해석결과 내부마찰각이 증가할수록 응력분담비가 증가하나 일정한 값으로 수렴하고 침하량이 감소하며, 최적배합비로 시공할 경우 측방유동 및 히빙현상의 감소를 유도할 것으로 판단된다.

• 한국지반신소재학회논문집
• /
• 제17권1호
• /
• pp.127-137
• /
• 2018

쇄석다짐말뚝(Gravel Compaction Pile, 이하 GCP)는 느슨한 사질토지반이나 연약한 점토지반에 쇄석을 다지고 압입하여 원지반에 말뚝을 조성함으로써 지반을 개량하는 공법이다. 국내 GCP공법은 많은 연구자들이 실내실험, 현장실험 등을 이용해 GCP 복합지반의 응력거동을 분석하였으나, GCP 복합지반의 상부에 재하되는 매트기초의 강성 차이에 따른 거동분석은 다소 미미한 실정이다. 따라서 본 연구에서는 수치해석을 통해 기초의 강성 차이에 따라 응력분담비를 규명하고자 하였다. 이를 위해 유한요소 해석프로그램인 ABAQUS를 이용하여 치환율을 변화시켜 모델링하고, 강성 차이에 따라 복합지반의 응력분담비와, 침하량 및 최대 수평변위량을 분석하였다. 분석 결과, 강성기초의 하중재하시 응력분담비는 연성기초의 하중재하보다 높게 평가되었으며, 연성하중재하조건에서의 침하량은 강성조건에서 보다 다소 높은 경향이 나타났다. 이는 상부기초의 강성 차이에 대한 응력거동 특성을 명확히 규명해야 할 필요성이 있다고 판단된다. 또한, 최대 수평변위는 강성의 차이에 상관없이 일정한 위치에서 최대 변위가 발생하였다.