• 한국운동역학회지
• /
• 제28권2호
• /
• pp.109-117
• /
• 2018

Objective: To compare head and hand movement patterns during squash forehand motions between experts and less-skilled squash players. Method: Four experts and four less-skilled squash players participated in this study. They performed squash forehand swings and a VICON motion analysis system was used to obtain displacement and velocity data of the head and right hand during the movement. Mann-Whitney U-tests were performed to compare head and hand range of motion and peak velocity, and cross-correlation was performed to analyze the head-hand coordination pattern between groups in three movement directions. Results: In terms of head and hand kinematic data, experts had greater head range of motion during down swings than less-skilled squash players. Experts seemed to reach peak hand velocity at impact by reaching peak head velocity followed by hand peak velocity within a given temporal sequence. In terms of head-hand coordination patterns, both groups revealed high positive correlations in the medial-lateral direction, indicating a dominant allocentric coordination pattern. However, experts had uncoupled coordination patterns in the vertical direction and less-skilled squash players had high positive correlations. These results indicate that the head-hand movement pattern likely an important factor squash forehand movement. Conclusion: Analysis of head and hand movement patterns could be a key variable in squash training to reach expert-level performance.

• PNF and Movement
• /
• 제3권1호
• /
• pp.27-34
• /
• 2005

Objective : The purpose of this study was conducted to find correct head and neck patterns, manual contact. verbal commands with proprioceptive neuromuscular facilitation(PNF). Method : This is a literature study with books, seminar note and book for PNF international course. Result : Keep the information of the biomechanics and neural science in head and neck patterns and emphasize that manual contact, verbal commands and visual stimulus. Manual contacting for movement guide and stability of the $C_0/C_1$ verbal command and visual stimulus for correcting of the $C_0/C_1$ movements. Conclusion : In reminder for PNF learning, begin with head and neck and upper trunk patterns. In that time, Knott and Voss(1968) had not enough information about biomechanic movement components and neural science movement components. But Knott and Voss(1968) emphasized that head and neck patterns relate with trunk, upper extremities and lower extremities directly. Alar ligaments are relaxed with the head in neutral and taut in flexion. Axial rotation of the head and neck tightens both alar ligaments. The right upper and left lower portions of the alar ligament limit left lateral flexion of the head and neck. Therefore, head and neck patterns has to be modify. When head moving, eye and vestibular stimulus will be change. During head and neck patterns, must be consider about stimulus of eye system and vestibular system also.

• Journal of Oral Medicine and Pain
• /
• 제20권2호
• /
• pp.291-306
• /
• 1995

Mandibular movement is composed of border movement and functional movement. Border movement such as maximal mouth opening, hinge opening ad lateral eccentric movement has good reproducibility, but functional movement such as chewing, swallowing and speech has also reproducibility. Especially for chewing movement, individual reproducibility has been confirmed by many studies. Study of chewing pattern is still in controversy. In new approach for raising the diagnostic value, numeric parameters and morphologic characteristics could be used for evaluation of chewing pattern. This study was performed to investigate the differences between chewing pattern in controls and in patients with temporomandibular disorders. Sixty-three patients with temporomandibular disorders participated in this study, and they were divided into unilaterally affected subjects or bilaterally affected subjects. Then unilaterally affected subjects were classified into closed lock group, disk displacement with reduction group, and degenerative joint disease group. For recording of chewing pattern, subjects were asked to chew one piece of presoftened chewing gum on both sides, and the chewing movement was recorded with the Electrognatho- Graphy(Bio-Research Associates Inc., U.S.A.). Tooth contact pattern for occlusal stability (Total left-right statistics )was also recorded with T-Scan(Tekscan Co., U.S.A.). The dta related to chewing pattern and total left-right statistics were statistically analyzed by SAS/stat program. The obtained results were as follows : 1. In patient group, mean value of A-P distance and the ratio of A-P distance to vertical distance were larger than control group, but the value of lateral distance in affected side and the closing velocity in unaffected side were smaller than that of control group, respectively. 2. In case of unilateral affected patients, chewing pattern of other side had tendency to restricted movement and slow velocity in closed lock group or degenerative joint disease group than control group or disk displacement with reduction group. 3. In bilateral degenerative joint disease patients, contralateral side had tendency to large range of motion and slow chewing velocity than preferred chewing side. 4. The patients with restricted mouth opening below than 35mm had higher value of total left-right statistics than patient group mouth opening above 35mm. Also closed lock group had higher total left-right statistics than disk displacement with reduction group, degenerative joint disease group and control group. 5. There was some difference in morphologic characteristics of chewing pattern between in control group and in affected side of unilateral patient group, but no difference between control group and unaffected side of unilateral patient group. 6. There were positive correlations between vertical distance and A-P distance, between vertical distance and chewing velocity, between A-P distance and chewing velocity, and between opening velocity and closing velocity in unilateral affected patients.

• 한국지반공학회논문집
• /
• 제19권6호
• /
• pp.127-149
• /
• 2003

본 교량은 교축방향에 대해 사각 60도인 90m 3경간 연속 완전 일체식 교대교량이다. 이 교량의 상부슬래브 콘크리트 타설후, 7일간의 콘크리트 양생에 따른 H말뚝의 수평거동을 알아보기 위하여, H말뚝 축방향으로 매설형 경사계와 변형률계를 설치하여 계측을 실시하였다. 이때 계측 결과를 수화열 및 건조수축 전용프로그램인 HACOM의 해석결과와 H말뚝의 횡방향 비선형 p-y 모델해석 거동에 비교하였다. 그 결과에 의하면, 실측한 H말뚝의 수평변위는 상부슬래브 콘크리트가 양생함에 따라 발생하는 수화열과 건조수축에 영향을 받았고, 그 크기는 각각 2.2mm, 1.4mm이었다. 말뚝 축방항 수평변위의 변곡점은 교대 기초저면에서 1.3m 위치에서 발생하였다. 이는 이 교량의 교대말뚝은 말뚝머리 고정조건으로 거동하는 것이 아니라 이와 매우 유사한 거동을 보였다. 그리고 실측한 말뚝의 휨응력 거동은 말뚝머리 회전구속과 같은 거동을 보이지 않고, 연직방향의 하중전이와 같은 거동을 나타내었다. 또한 교대말뚝의 비선형 p-y 모델해석으로 구한 최대휨응력 증분량의 크기는 약 300(kgf/$\textrm{km}^2$)이었고, 교대말뚝의 계측기 부착위치와는 무관하게 실측한 값보다 약 2배 크게 발생하였다. 그리고 말뚝의 비선형 p-y 모델해석에서 말뚝의 수평하중, 최대수평 변위, 최대휨응력, 최대휨모멘트는 콘크리트 양생시간에 따라 모두 선형적인 거동을 보였다.

• 한국운동역학회지
• /
• 제21권1호
• /
• pp.9-16
• /
• 2011

The purpose of this study is to analyze the effects of both various shoe types and bare feet on ground reaction force while walking. Ten first-year female university students were selected. A force platform(Kistler, Germany) was used to measure ground reaction force. Six types of shoe were tested: flip flops, canvas shoes, running shoes, elevated forefoot walking shoes, elevated midfoot walking shoes, and five-toed shoes. The control group was barefooted. Only vertical passive/active ground reaction force variables were analyzed. The statistical analysis was carried out using the SAS 9.1.2 package, specifically ANOVA, and Tukey for the post hoc. The five-toed shoe had the highest maximum passive force value; while the running shoe had the lowest. The first active loading rate for running shoes was the highest; meanwhile, bare feet, the five-toed shoe, and the elevated fore foot walking shoe was the lowest. Although barefoot movement or movement in five toed shoes increases impact, it also allows for full movement of the foot. This in turn allows the foot arch to work properly, fully flexing along three arches(transverse, lateral, medial), facilitating braking force and initiating forward movement as the tendons, ligaments, and muscles of the arch flex back into shape. In contrast movement in padded shoes have a tendency to pound their feet into the ground. This pounding action can result in greater foot instability, which would account for the higher loading rates for the first active peak for padded shoes.

• 대한소아치과학회지
• /
• 제25권1호
• /
• pp.197-208
• /
• 1998

This study was carried out to compare the amount of the maxillary bone remodeling and tooth displacement in each three maxillary superimposition methods, Ricketts, Best-fit, Structural method. Forty cases of the lateral cephalometric radiographs from 27 boys and 13 girls who had been treated to correct anterior cross-bite were selected for the study. The initial radiographs were taken at about 8-year-old and the second radiographs were taken in about 3.3 years later. Followings were the results: 1. With the Structural method, backward movement was shown in PNS, while forward movement was observed in ANS and point A. With the Ricketts method, however, all structures were shown significant backward movement comparing with Structural method(P<0.05). With the Best-fit method, the amount of horizontal movement was similar to that of the Structural method(P>0.05). 2. The palate seemed to be moved downward with Structural method, but there was no measured downward remodeling on nasal floor with Ricketts and Best-fit method(P<0.05). 3. Comparing with Structural method, Ricketts and Best-fit method significantly underestimated the eruption of the teeth by 20% to 30% (P<0.05). 4. The Structural method showed the anteroinferior rotation (43%) and posteroinferior rotation(57%) of the palatal plane, while the Best-fit method showed mostly anterosuperior rotation(87%), but no change was found in the Ricketts method. 5. With the Structural method, there was a statistically significant correlation between the amount of the rotation of the palatal plane and that of N-S line(r=0.86). 6. The measured angles of the long axis of the incisors and molars showed no significant difference in each 3 methods(P>0.05).

• 한국운동역학회지
• /
• 제23권3호
• /
• pp.209-218
• /
• 2013

This study was to perform the kinetic analysis of forward $1\frac{1}{2}$ somersault on the platform diving. Six men's diving players of the Korea national reserve athletes participated in this study. The variables were analyzed response time, velocity, center of mass (COM), angle, center of pressure (COP) and ground reaction force (GRF) of motion. For measure and analysis of this study, used to synchronized to 4 camcorder and 1 force plate, used to the Kwon3D XP (Ver. 4.0, Visol, Korea) and Kwon GRF (Ver. 2.0, Visol, Korea) for analyzed of variables. The results were as follows; Time factor were observed in maximum knee flexion depending on the extent of use at phase 1 of take-off to execute the somersault. This enabled the subject to secure the highest possible body position in space at the moment of jumping to execute the somersault and prepare for the entry into the water with more ease. Regarding the displacement of COM, all subjects showed rightward movement in the lateral displacement during technical execution. Changes in forward and downward movements were observed in the horizontal and vertical displacements, respectively. In terms of angular shift, the shoulder joint angle tended to decrease on average, and the elbow joints showed gradually increasing angles. This finding can be explained by the shift of the coordinate points of body segments around the rotational axis in order to execute the half-bending movement that can be implemented by pulling the lower limb segments toward the trunk using the upper limb segments. The hip joint angles gradually decreased; this accelerated the rotational movement by narrowing the distance to the trunk. Movement-specific shifts in the COP occurred in the front of and vertical directions. Regarding the changes in GRF, which is influenced by the strong compressive load exerted by the supporting feet, efficient aerial movements were executed through a vertical jump, with no energy lost to the lateral GRF.

• PNF and Movement
• /
• 제15권3호
• /
• pp.381-387
• /
• 2017

Purpose: Although some studies indicate that the Sorensen test may not be used to examine back muscles such as the erector spinae, alternatives to the back-extension test are rarely suggested. Therefore, the purpose of the present study was to investigate an effective way to stimulate the erector spinae muscles by adding a component of trunk rotation and lateral bending to general back extensions. Methods: A total of 18 healthy, physically active participants performed simple trunk extension, extension with trunk rotation, and extension with lateral bending. Surface electromyography responses of the latissimus dorsi, thoracic, and lumbar levels of the erector spinae; the gluteus maximus; and the biceps femoris muscles were investigated during these 3 conditions of modified back extension tests. Results: The simple trunk extension exercise caused significant increases in activity of the gluteus maximus and biceps femoris muscles as compared to the extension with rotation and lateral bending exercises. The extension with trunk rotation exercise showed significantly greater activation in the thoracic and lumbar levels of the erector spinae and in the latissimus dorsi as compared to the other exercises. The index measuring subjective difficulty was significantly lower in the simple trunk extension exercise as compared to the extension with trunk rotation and extension with lateral bending exercises. Conclusion: The present study suggests that extension with trunk rotation has the advantage of stimulating the para-spinal muscles, while simple trunk extension may not be adequate to selectively simulate the para-spinal muscles but may be appropriate for examining global trunk extensors.

• Earthquakes and Structures
• /
• 제10권1호
• /
• pp.163-178
• /
• 2016

Composite Lightweight (CL) insulated walls have gained wide adoption recently because the exterior claddings of steel building frames have their cost effectiveness, good thermal and structural efficiency. To investigate the seismic behavior, lateral stiffness, ductility and energy dissipation of steel frames with the CL infill walls, five one-story one-bay steel frames were fabricated and tested under cyclic loads. Test results showed that the bolted connections allow relative movement between CL infill walls and steel frames, enabling the system to exhibit satisfactory performance under lateral loads. Additionally, it is found that the addition of diagonal steel straps to the CL infill wall significantly increases the initial lateral stiffness, load-carrying capacity, ductility and energy dissipation capacity of the system. Furthermore, the test results indicate that the lateral stiffness values of the frames with the CL infill wall are similar to those of the bare steel frames in large lateral displacement.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제9권2호
• /
• pp.127-131
• /
• 2004

A low-cost, simple strip reader system using a linear movement mechanism of CD-ROM deck has been developed to characterize a lateral flow membrane-based immunochromatographic assay. The test strip reader was assembled by a CD-ROM deck and home-made optical head especially designed for immunoassays. The optical head for detecting reflected light from the test strip surface consists of green light-emitting diode, large area silicon photodiode, and anodized aluminum mounting block providing a slit structure for cutting light from the LED. The stepping motor of the deck was operated in the full step mode, whose distance of each reading point is about 0.15mm. The performance of the strip reader was tested by analysis of HBV(hepatitis B virus) antigen test kit. This strip reader can be useful for inexpensive, disposable, and membrane-based assays that provide visual evidence of the presence of an analyte in a liquid sample.