• 대한전자공학회논문지
• /
• 제17권2호
• /
• pp.10-14
• /
• 1980

본 논문에서는 DH-laser diode의 threshold current를 계산하기 위하여 2차고조파 왜곡 (se cond harmonic distortion)에 대해 Rate 방정식 (Rate-equation)을 동적상태와 정적상태 방정식으로 연릴하여 계산하였다. 특히 고조파 왜곡 ( )을 계산하는데 바이어스 전류 에 대하여 변조 전류 을 변조계수 m으로 놓고 (Jm=mJo)계산하여 주입전류 J가 Jth에서 2차 고조파 왜곡이 최대치를 가짐을 보여 ,이제까지 알려진 Jth조사 방법보다 간편하고 정확하게 조사할 수 있음을 제시하였다.

• 대한물리의학회지
• /
• 제9권4호
• /
• pp.433-438
• /
• 2014

PURPOSE: The purpose of our study was to compare a 975-nm, 500-mW GaAlAs low-level laser therapy versus placebo low-level laser therapy with regard to the immediate changes on the myofascial trigger point of the dominant upper trapezius muscle in subjects with rounded shoulder posture. METHODS: Thirty-two male college students with rounded shoulder posture and shoulder pain consented to participate in the experiment. The subjects were randomly assigned to a 2-minute procedure with either an active GaAlAs low-level laser or a placebo GaAlAs low-level laser. The pressure-pain threshold and visual analog scale on tenderness at 3 kg were measured with an algometer before and after the laser treatments. RESULTS: The active GaAlAs low-level laser group showed significant changes in pressure-pain threshold and visual analog scale on tenderness at 3 kg (p<0.05). The placebo GaAlAs low-level laser group showed no significant changes in either pressure-pain threshold or visual analog scale on tenderness at 3 kg (p>0.05). CONCLUSION: An immediate effect was observed in pressure-pain threshold and visual analog scale on tenderness at 3 kg following a 2-minute application ($857.14J/cm^2$) of a 975-nm, 500-mW GaAlAs low-level laser to the myofascial trigger point of the dominant upper trapezius muscle in patients with rounded shoulder posture.

• 한국레이저가공학회지
• /
• 제2권3호
• /
• pp.52-61
• /
• 1999

The laser induced forward transfer(LIFT) technique employs a pulsed laser to transfer parts of a thin metal film from an optically transparent target onto an arbitrary substrate in close proximity to the metal film on the target. In this work, a two-step method, the combination of LIFT process, in which a Au film deposited on the $Al_2$O$_3$ substrate by Nd:YAG laser and subsequent Au electroless metal plating on the by LIFT process generated Au seed, was presented. The influence of laser parameters, wavelength, laser power, film thickness and overlap ratio of pulse tracks, on the shapes of deposit and conductor line after electroless plating is experimentally studied. As a results, the threshold power densities for ablation, deposition and metallization were determined and comparison of threshold value between the wave length 1064nm and the second harmonic generated 532nm. In odor to determine a possible application in the electronic industry, a smallest conduct spot size, line width and isolated line space were generated.

• 한국재료학회지
• /
• 제7권3호
• /
• pp.213-217
• /
• 1997

200MHz 응향광변조기 (AOM: Acousto-Optic Modulator)는 제 2고조파(SHG: Second Harmonic Generation)녹색 레이저와 함께 DVDR(Digital Video Disk Recorder)에 적용되어 고밀도 광기록용으로 사용되었다. 이러한 고밀도 광기록 장치로써 사용되기 위해서는 고출력 레이저의 사용이 필수적이며, 레이저 빔이 통과하는 각 광학 소자들의 코팅막은 고출력 레이저 빔에 대해 높은 레이저 damage threshold를 가져야 한다. AOM의 음향공학재료로 사용되는 $TeO_{2}$단결정에 코팅막의 종류 및 증착조건을 변화시키며 E-beam 증착법으로 A/R코팅 시편을 준비하였다. 0.55W의 입력 power를 갖는Ar레이저를 사용하여 코팅의 광손상 정도를 확인하였다. $AI_{2}O_{3}$막에 비해 $ZrO_{2}$와 $SiO_{2}$막을 사용한 경우 레이저 damage threshold는 크게 향상되었다. 또한 AOM모듈을 제작 후 구동회로와 연결하여 약 20mW의 SHG power를 입력시키며 출력 power long term안정성을 측정하였다.

• 대한임상전기생리학회지
• /
• 제4권1호
• /
• pp.85-93
• /
• 2006

The purpose of this study was to determine the effect of transcutaneous electrical nerve stimulation(TENS) and He-Ne laser at auricular point on delayed onset muscle soreness(DOMS). Twenty healthy adult males and females performed eccentric exercise of the elbow flexor. DOMS was induced in a standardised fashion in the nondominant elbow flexor of all subject by repeated eccentric exercise. Subject were assigned randomly to one of trees groups. Group 1 received TENS to the appropriate auricular point for biceps pain, Group 2 received laser to the appropriate auricular point for wrist pain, Group 3 received no treatment and served as controls. After exercise, treatments were applied at 24 hours and at 48 hours and at 72 hours after. Group 1 showed stastically significant increase(p<0.05) in pain threshold after treatment whereas the Group 2 and 3 did not. Group 1 showed a significant increase in pain threshold than Group 2. These results suggest that TENS has the capability to higher pain threshold but laser does not.

• 한국정밀공학회지
• /
• 제30권10호
• /
• pp.1009-1015
• /
• 2013

Ultra-short laser pulses are effective, when high requirements concerning accuracy, surface roughness and heat affected zone are demanded for surface structuring. In particular, picosecond laser systems that are suited to be operated in industrial environments are of great interest for many practical applications. This paper focused on inducing optimum process parameters for higher volume ablation rate by analyzing a relationship between crater diameter and optical spot size. In detail, the dependency of the volume ablation rate, penetration depth and threshold fluence on the pulse duration 8 ps and wavelength of 515 nm was discussed. The experimental results showed that wavelength of 515 nm resulted in less threshold fluence ($0.075J/cm^2$) on copper than IR wavelength ($0.3J/cm^2$). As a result, it was possible that optimum fluence for higher volume ablation rate was achieved with $0.28J/cm^2$.

• 한국레이저가공학회지
• /
• 제3권3호
• /
• pp.39-45
• /
• 2000

The volume and depth of the craters produced on silicon samples during high power laser ablation show a strong nonlinear change as the laser irradiance increases across a threshold value, approximately 2.2$\times$10$\^$10/ W/㎠. Time-resolved shadowgraph images of the ablation plume reveal the ejection of large particulates from the sample for laser irradiance above the threshold, with a time delay of about 300-400 ㎱. The numerically estimated thickness of the superheated liquid layer, considering the transformation of liquid metal into liquid dielectric near the critical state, agrees with the measured agrees with crater depths. It is suggested that a phase explosion of the deep superheated liquid layer near the critical state is responsible for the measured sudden increase of crater volume and the ejection of large particulates.

• 한국재료학회지
• /
• 제18권5호
• /
• pp.247-252
• /
• 2008

A laser glass cutting system using a femto-second laser was evaluated for Flat Panel Display (FPD) glass. A theoretical analysis of the ablation threshold and depth is described using an explicit analytic form. Experiments for clean and deep grooves were performed using a 3W femto-second laser, and the relationships between the input energy and the scribing depth as well as the threshold energy are presented. Mechanical breaking after the scribing process was carried out and the results are compared with a theoretical method. It was found that a two-sided LCD panel glass can be cut clearly using the laser cutting method. The methodology was found to be very effective as a mass-production cutting system.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.511-514
• /
• 2000

This work aimed to develop ITO (Indium Tin Oxide) thin films ablation with a KrF Eximer laser required for the application in flat panel display, especially patterning into small geometry on a large substrate area. The threshold fluence for ablating ITO on glass substrate is about 0.1 J/cm$^2$. And its value is much smaller than using third harmonic Nd:YAG laser. Through the optical microscope measurement the surface color of the damaged ITO is changed into dark brown and irradiated spot is completely isolated form the undamaged surroundings by laser light. The XPS analysis showed that the relative surface concentration of Sn and In were essentially unchanged (In :Sn=5:1) after irradiating Eximer laser. Using aluminium mask made by second harmonic Nd:YAG laser the ITO patterning is carried out.

• Journal of the Optical Society of Korea
• /
• 제20권5호
• /
• pp.601-606
• /
• 2016

In this study, in order to analyze the low-temperature sintering process of silver and copper nanoparticles, we calculate their melting temperatures and surface melting temperatures with respect to particle size. For this calculation, we introduce the concept of mean-squared displacement of the atom proposed by Shi (1994). Using a parameter defined by the vibrational component of melting entropy, we readily obtained the surface and bulk melting temperatures of copper and silver nanoparticles. We also calculated the absorption cross-section of nanoparticles for variation in the wavelength of light. By using the calculated absorption cross-section of the nanoparticles at the melting temperature, we obtained the laser threshold energy for the sintering process with respect to particle size and wavelength of laser. We found that the absorption cross-section of silver nanoparticles has a resonant peak at a wavelength of close to 350 nm, yielding the lowest threshold energy. We calculated the intensity distribution around the nanoparticles using the finite-difference time-domain method and confirmed the resonant excitation of silver nanoparticles near the wavelength of the resonant peak.