• 한국광학회지
• /
• 제23권5호
• /
• pp.197-202
• /
• 2012

맴핑용 레이저 레이더 실험실 시제품의 성능시험과 분석 결과를 소개한다. 광섬유 레이저와 아발란치 광검출기 외 관련 구성모듈로 이루어진 레이저 레이더 시스템이 설계, 제작되었다. 레이저 레이더 시스템은 현재 실험실 환경에서의 성능 확인을 목적으로 하는 실험실 시제품으로서, 레이저 레이더 광원 특성, 거리 정확도, 소광율, 오경보율과 같은 시스템 성능변수가 실험적으로 측정되었다. 실험결과 분석을 통해 레이저 레이더 시제품이 양호한 성능수준을 제시하는 것으로 확인되었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1423-1426
• /
• 2005

Map building is the most important thing for the mobile robots navigation. It requires specific vision system such as CCD camera, range finding system, and many other things. Laser range finder has highly collimated beams can be obtained easily, thus achieving lateral resolution. Laser Diode is used for a continuous laser source. The Automatic Current Control Circuit and the Bias-T is used for mix AC signal with DC bias. This signal is used for driving Laser Diode. The main idea of the calculating distance is detecting phase shift between reference signal and detected signal by photo detector. For the signal processing, the Lock-in amplifier system is addressed in this paper. We used a diffused reflected beam to detect phase shift in this system. But this beam is minuteness signal so it can be easily buried in nose. Lock-in amplifier is used to measure the amplitude and phase of signals which are buried in noise.

• Journal of Advanced Marine Engineering and Technology
• /
• 제37권7호
• /
• pp.737-742
• /
• 2013

Recently, unmanned aircrafts for safe measurement in hazardous locations have been developed. In a method of operation of unmanned aircraft vehicles (UAV), there are two methods of manual control and automatic control. Small UAVs are used for low altitude surveillance flights where unknown obstacles can be encountered. Obstacle avoidance is one of the most challenging tasks which the UAV has to perform with high level of accuracy. In this study, we used a laser range finder as an obstacle detector in automatic navigation of unmanned aircraft to patrol the destination automatically. We proposed a system to avoid obstacles automatically by measuring the angle and distance of the obstacle using the laser range finder.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.108-111
• /
• 2016

We propose the method for measuring sensitivity of optical receiver of a long-range laser range finder in real-time. The sensitivity of the detector can be calculated using the detected voltage of the reference sensor, the area of the reference sensor and the transmittance ratio of neutral density filters. To evaluate the performance of the proposed method, we implemented a system and performed experiments. As a result, this system can be measured from 2nW to $113{\mu}W$. With this system, we measured the sensitivity of 37nW and 7nW with PIN PD and APD sample, respectively. This system has the advantage for the performance test of an optical sensor module in the long-range laser range finder.

• 한국광학회지
• /
• 제35권2호
• /
• pp.61-70
• /
• 2024

400 nm부터 1,600 nm까지의 파장 영역에서 단일모드 광섬유에 결합된 12개의 다이오드 레이저 광원를 기반으로 하는 레이저 복사출력계 교정시스템을 소개한다. 본 시스템은 복사출력 측정위치에서 레이저 출력요동을 최소화하였고 모든 광원에 대해 비슷한 빔 크기를 갖는다. 또한 감응도의 비균일도 및 비선형성을 최소화하기 위해 적분구 기준기를 사용하였다. 이 교정시스템의 최소 측정불확도는 대부분의 레이저 파장에서 1.1% (k=2)로 추정된다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.330-332
• /
• 2006

A short distance laser range detector was developed on digital circuit. The circuit changed the analog circuit to digital circuit as possible as. The currently available laser range circuit one uses analog circuit mainly. But this ranger design targeted mass production with digital reporting function. So digital circuits replaced the analog circuit except amplifier and remained minor circuits those are hard to replace with digital circuit. The simulation shows that it is possible to make a reasonable distance measuring circuit on a digital circuit for very low price compare to analog circuit one.

• 한국정보통신학회논문지
• /
• 제8권2호
• /
• pp.484-493
• /
• 2004

본 논문은 초고주파 주파수 차이 검출기를 이용한 광파의 off-set 로킹에 대하여 설계 및 제작 실험 결과를 기술하였다. 두 광파를 비팅하여 중간 주파수인 1.5GHz 주파수 성분을 추출하고 이 값을 다시 1.5GHz 기준 발진기 주파수와 곱하여 차이주파수 성분을 추출한 후 주파수 차이 검출기를 이용하여 주파수 로킹을 시켰다. 상용화된 초고주파 부품을 사용하여 주파수 차이 검출기를 제작하였으며 1.55$\mu\textrm{m}$ 파장의 반도체 레이저의 발생 광파를 입력 광파와 1.5GHz의 주파수 off-set을 유지하면서 로킹이 이루어짐을 확인하였으며 로킹 범위는 320MHz이었다.

• 산업기술연구
• /
• 제28권B호
• /
• pp.239-244
• /
• 2008

We have realized the swept source optical coherence tomography(SS-OCT) by using the self-fabricated wavelength swept laser(wavelength tuning range : 80nm, line-width : 0.12nm, wavelength sweeping rate : 50Hz). In addition, we have used the dual balanced detector that could make a mirror image in OCT display suppressed. We can also fabricate the comb filter of Michelson interferometer type for fast-signal processing in OCT. Using this SS-OCT system for measuring an mirror, a 1mm-depth glass and an onion, we confirmed that the in vivo epidermal cross-sectional images for them can be obtained appropriately.

• 한국통신학회논문지
• /
• 제21권12호
• /
• pp.3286-3292
• /
• 1996

An experimental results of optical requency locked loop with DFB semiconductor laser as VCO are presented. Using quadricorrelator as frequency difference detector and frequency off-set locking technique with 1GHz reference frequency, frequency locking range of 140MHz was achieved. This paper reports the design and realization details of the loop.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.554-557
• /
• 1993

The error analysis for the Time-in-Flight Laser Range Finder with Multiple Tone Amplitude Modulation relevant to the phase detection error is made. The distance can be estimated to solve the formulate which express the relationship between the absolute distance from the range finder to the object and the wavenumbers and the phases of the modulated waves by the optimization technique. The main cause of the estimation error can be considered as the phase detection error induced from the amplitude modulator and the phase detector. To clarify the phase detection error and the optimal amplitude frequency set, the numerical analysis are made.