• Journal of Korea Multimedia Society
• /
• v.20 no.2
• /
• pp.225-233
• /
• 2017

Line-laser beams are used for accurate measurement of 3D shape, which is robust to external illumination. For depth measurement, we project a line-laser beam across an object from the face and take an image of the beam on the object surface using a CCD camera at some angle with respect to the face. For shape measurement, we project parallel line-laser beams with narrow line to line distance. When a layer of thin materials attached to a cylinder is long narrow along its circumference, we can measure the shape of the layer with a small number of parallel line beams if we project line beams along the circumference of the cylinder. Measurement of the depth of the attached materials on a line-laser beam is based on the number of pixels between an imaginary line along the imaginary cylinder without the attached materials and the beam line along the materials attached to the cylinder. For this we need to localize the imaginary line in the captured image. In this paper, we model the shape of the line as an ellipse and localize the line with least square estimate. The proposed method results in smaller error (maximum 0.24mm) than a popular 3D depth camera (maximum 1mm).

• Journal of Korea Multimedia Society
• /
• v.21 no.2
• /
• pp.181-187
• /
• 2018

Line-laser beams are used for depth measurement of welding beads along the circumference of a pipe. For this, first we project a line-laser beam on an rotating pipe and take a sequence of images of the beam projected on the pipe using a CCD camera. Second, the projected line laser beam in each image is detected, converted into a thin curve. Finally measure the distance between the thinned curve and an imaginary line. When a line-laser beam is projected to a rough metal surface such as arc welding beads, the beam is severely scattered. This severe scattering makes the thinned curve perturbed. In this paper, we propose a thinning method robust against scattering of line lasers. First, we extract a projected line laser beam region using an adaptive threshold. Second, we model a thinned curve with a spline curve with control points. Next, we adjust the control points to fit the curve to the projected line-laser beam. Finally, we take a weighted mean of thin curves on a sequence of image frames. Experiments shows that the proposed thinning method results in a thinning curve, which is smooth and fit to the projected line-laser beam with small error.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2002.05a
• /
• pp.25-27
• /
• 2002

Most of automotive companies make use of spot welding in order to assemble car body. Even though spot welding has been developed for last 60 years, there were some limitations in upgrading production line. Laser welding has advantages In productivity and degree of freedom in design. Thanks to fast speed, we can reduce body assembly line by 80%. Also with non-contact & one-side approach, it is possible to design various car body structures. New project launched the laser welding technology in mass production has started in 1999. In this paper, a new type of cur named 'next generation vehicle (NGV)' is introduced. The car body of NGV is welded with 4㎾ Nd: YAG laser.

• Journal of the Semiconductor & Display Technology
• /
• v.12 no.1
• /
• pp.15-21
• /
• 2013

In this paper, sensor system and inspection algorithm in order to inspect steel balance weight for automobile is described. Steel balance weight is composed of clip and weight, which is joined by press process. The defective one has a gap between clip and weight. To detect whether there is a gap, sensor system is simply configured with laser line projector and USB camera, which make it possible to measure the height difference of clip and weight area. Laser line pattern which is made on the surface of a balance weight is captured by USB camera. In case that USB camera is used in machine vision, barrel distortion caused by wide angle lens makes the captured image distorted. Image warping function is applied to correct the distortion. Simple image processing algorithm is applied to extract the laser line information and whether it is good or not is judged through the extracted information.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.10a
• /
• pp.1190-1191
• /
• 2004

New $4^{th}$ generation synchrotron facility, XFEL, is almost similar to previous $3^{rd}$ generation synchrotron facility in the view of radiological aspects and most important positions are a dump and synchrotron radiation beam line. In this paper, tile radiation protection solutions for them and undulator are suggested and discussed.

• Journal of KIBIM
• /
• v.9 no.4
• /
• pp.10-20
• /
• 2019

As a result, the areas of knowledge that received the highest score in a positive impact were areas of risk management, while those that received the highest score in a negative impact were items of software management. In addition, each project was rated according to the score obtained. The distribution of grades by project was 71% for projects above middle grade and 29% for projects below middle grade. These results show that interest in BIM technology is increasing compared to the past, actual field application and research are actively being conducted, and that real construction sites also enjoy significant positive effects in terms of project management through BIM. In addition, the company is using BIM by applying advanced digital technologies such as AI technology, laser scanning technology and drone technology in line with the era of the fourth industrial revolution. Such a steady progress in future research on BIM technology development will reduce the number of low-grade projects and many middle-grade projects are expected to be upgraded to higher-level ones.

• 한국연소학회:학술대회논문집
• /
• 2006.10a
• /
• pp.160-167
• /
• 2006

In this project, we studied more accurate and reliable sensing method for oxygen in reheating furnace, made the empirical model for NOx concentration based on oxygen and evaluate the stability of the Tuneable Diode Laser (Absorption) Spectroscopy(TDL(A)S). The tested oxygen monitoring system is installed at work-field reheating furnace on hot roll at POSCO and compared with the Zr sensor system which shows too sensitive because it measures oxygen concentration on a spot unlike TDLS sensor which is successfully applied at 13m-width reheating furnace to measures the line average along the Optical Path Line(OPL).