• 한국자동차공학회논문집
• /
• 제11권3호
• /
• pp.7-12
• /
• 2003

Mixture formation in the cylinder of a lean bum engine has been observed by Laser Induced Fluorescence technique. XeCl laser (308nm) was used to produce a laser sheet. 3-pentanone has been added to iso-octane fuel to produce fluorescence, the intensity of which is proportional to the concentration of the fuel. The laser sheet was introduced through the piston window and the fuel distribution in the vertical plane was observed through a side window. Comparison has been made for the cases of selected fuel injection timing as 0, 360, 405, and 450 CA. For the case of 0 and 360 CA injection, uniform fuel distribution in the combustion chamber has been obtained at the ignition time which is favorable for the high load mode. And the late injection cases, 405 and 450 CA, revealed the stratified formation of rich mixture around the spark plug. That extends the lean misfire limit and reduces cyclic variation in the low load mode.

• 한국자동차공학회논문집
• /
• 제12권1호
• /
• pp.74-82
• /
• 2004

Planar laser-induced fluorescence(PLIF) has been widely used to obtain two dimensional fuel distribution. Acetone PLIF is chosen because fluorescence signal from acetone as a fluorescent tracer is less sensitive to oxygen quenching than other dopants. Acetone PLIF is applied to measure quantitative air excess ratio distribution in an engine fueled with LPG. Acetone is excited by KrF excimer laser (248nm) and its fluorescence image is acquired by ICCD camera with a cut-off filter to suppress Mie scattering from the laser light. For the purpose of quantifying PLIF signal, an image processing method including the correction of laser sheet beam profile is suggested. Raw images are divided by each intensity of laser energy and profile of laser sheet beam. Inhomogeneous fluorescence images scaled with the reference data, which is taken by a calibration process, are converted to air excess ratio distribution. This investigation shows instantaneous quantitative measurement of planar air excess ratio distribution for gaseous fuel.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2001년도 추계학술대회 논문집
• /
• pp.358-359
• /
• 2001

PAHs는 불완전연소 과정과 주유소나 타르 생산공장 주변에서 발생하는데 돌연변이와 발암의 잠재력으로 인하여 특별한 관심이 요구되는 것들이고 US-EPA에서도 우선 오염물질로 선정되었다. PAHs를 검출하는 훌륭한 기술들이 존재하나, 이러한 기술들은 연속적인 모니터링이 요구되거나 많은 수의 샘플을 분석해야할 경우에 상당한 양의 비용과 시간이 요구된다. 그러나 분광학 기술을 바탕으로 한 Laser-Induced Fluorescence(LIF) spectroscopy를 이용한 방법은 실시간으로 연속적인 측정을 가능하게 할 뿐 아니라 여러 가지 PAHs, 유류오염물질 등의 물질을 동시에 측정할 수 있다. (중략)

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.13-21
• /
• 1997

Excitations of eight pumping transitions for nitric oxide fluorescence imaging are analyzed under equivalent experimental conditions to determine the detection. Frequency mixed dye laser pumping, 1st anti-Stokes $H_2$ Raman of KrF excimer laser pumping and ArF excimer laser pumping show good sensitivities.

• Journal of Biosystems Engineering
• /
• 제34권1호
• /
• pp.37-43
• /
• 2009

Hyperspectral reflectance and fluorescence scattering have been researched recently for measuring fruit post-harvest quality and condition. And they are promising for nondestructive detection of fruit quality. The objective of this research was to develop a model, which measure the quality of apple by using hyperspectral reflectance and fluorescence. A violet laser (408 nm) and a quartz tungsten halogen light were used as light sources for generating laser induced fluorescence and reflectance scattering in apples, respectively. The laser induced fluorescence and reflectance of 'Golden Delicious' apples were measured by using a hyperspectral imaging system. Fruit firmness, soluble solids and acid content were measured using standard destructive methods. Principal component analyses were performed to extract critical information from both hyperspectral reflectance and fluorescence data and this information was then related to fruit quality indexes. The fluorescence models had poorer predictions of the three quality indexes than the reflectance models. However, the prediction models of integrating fluorescence and reflectance performed consistently better than the individual models of either reflectance or fluorescence. The correlation coefficient for fruit firmness, soluble solid content, and tillable acidity from the integrated model was 0.86, 0.75, and 0.66 respectively. Also the standard errors were 6.97 N, 1.05%, and 0.07% respectively.

• 대한소아치과학회지
• /
• 제30권1호
• /
• pp.1-9
• /
• 2003

초기 우식병소와 건전한 치질은 광학적 특성이 다르다는 사실에 근거하여 치과 치료용으로 개발된 가시광선 영역의 레이저의 형광현상과 광활성재를 이용하여 우식 치질과 건전한 치질간의 광학적 특성의 차이를 색조의 차이로 유도 전환함으로써 초기 우식 병소를 조기에 시각적으로 탐지하여 진단하는 방법을 개발하는데 본 연구의 목적이 있다. 소의 치아를 이용하여 여러 단계 깊이의 인공우식병소를 유발하고 우식병소의 표면에서 아르곤 레이저를 조사하여 건전 치질과 우식 치질 사이의 반사된 형광강도의 차이를 컴퓨터 영상분석프로그램을 통해 측정하였다. 또한 광활성재를 병소의 표면에 도포하여 형광현상의 색조대비 증진효과를 평가하였다. 실제 조직학적 병소와 레이저 형광법 사이의 상관관계 분석 및 회귀 분석을 통하여 다음과 같은 결과를 얻었다. 레이저 형광법에 의한 우식 치질은 건전 치질보다 어둡게, 그리고 광활성재를 도포한후 레이저 형광법으로 관찰한 우식 병소는 건전 치질 보다 밝게 관찰 되었으며 광활성재를 이용한 레이저 형광법이 탈회의 초기단계에서는 레이저 형광법에 비해 진단학적 민감도가 컸다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 추계학술대회 논문집
• /
• pp.108-111
• /
• 2004

Laser induced incandescence and laser induced fluorescence techniques have been investigated to measure the concentrations of soot and PAH, respectively. The Nd:YAG and dye lasers were used to form a sheet beam, and its wavelength were modulated to obtain a optimized signals of soot and PAH. Results showed that the relative size groups of soot and PAH can be measured by using our laser techniques.

• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.149-154
• /
• 2022

In this paper, laser-induced fluorescence properties of four plastics were characterized through spectrometer analysis for real-time microplastic counting. Recently, environmental problems related to microplastics have emerged. In order to detect microplastics, analysis methods such as FT-IR and Raman are used. However, they have the disadvantages of being time-consuming and requiring a pretreatment process. In most plastic products on the market, 10% to 30% of plasticizers and reinforcing agents are added. Therefore, most microplastics present in seawater and freshwater emit fluorescence signals by 270 nm UV light source regardless of their type due to their molecular structure due to additives. Real-time microplastics counting is possible more easily by using the proposed laser-induced fluorescence detection method because of the fluorescence expression characteristic of 340 nm that appears due to the plasticizer of plastics.

• 대한소아치과학회지
• /
• 제27권1호
• /
• pp.161-168
• /
• 2000

본 연구는 치아우식을 유발할 수 있는 모든 요인이 종합적으로 작용하여 이루어진 치면의 최초의 변화 즉, 법랑질 초기우식증의 정도를 아르곤 레이저를 이용한 형광법으로 조기에 탐지하고 이와 같은 방법이 향후 개인에서의 우식이 유발될 수 있는 가능성을 예측할 수 있는 우식 활성검사법으로서의 이용 가능성 이 있는지의 여부를 규명하고자 하는데 목적이 있다. 조선대학교 부속치과병원 소아치과에 내원한 아동중 유구치의 탈락이 없는 $7\sim10$세 사이의 어린이 30명을 대상으로 하여 치아의 순면과 협면에 레이저 조사하고 특수 필터를 사용하여 우식치아의 개수를 측정하여 기존의 우식활성도 측정방법인 $Cariescreen^{(R)}$ test, 구강환경검사인 우식경험치아의 수(dDfFtT) 등 각종 검사법들과 상관관계를 비교, 평가한 바 다음과 같은 결론을 얻었다. 1. 레이저 형광법에 의한 관찰이 육안에 의한 관찰에 비해 초기우식병소를 더 많이 관찰하였다. 2. 아르곤 레이저 형광법을 이용한 우식활성도 측정법은 기존의 $Cariescreen^{(R)}$ test, 그리고 dDfFtT 검사 등과 높은 상관 관계를 나타냈다.

• 한국응용과학기술학회지
• /
• 제23권1호
• /
• pp.70-76
• /
• 2006

The influence of fluorophor, scatterer, absorber in turbid materials by light scattering were interpreted for the scattered fluorescence intensity and wavelength, it is studied the molecular property by laser induced fluorescence spectroscopy. It can be found that the effects of optical property are penentrated in scattering media by the optical $parameters({\mu}s$, ${\mu}a$, ${\mu}t$, ${\gamma}$, ${\rho})$. The value of scattering coefficient ${\mu}s$ is large appeared by means of the increasing particles of scattering, it can be found that the slope appears exponentially as a function of distance from laser source to detector. It may also utilize in designing the best model for oil chemistry, laser medicine and application of medical engineering.