• 제목/요약/키워드: Laser crystal

검색결과 479건 처리시간 0.023초

UV light generation by CsLiB6O10 and effect of doping on crystal properties

  • Sasaki, Takatomo
    • 한국결정성장학회:학술대회논문집
    • /
    • 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
    • /
    • pp.462-487
    • /
    • 1996
  • We report on the fourth and fifth harmonics generations of Nd:YAG laser radiation realized in CsLiB6O10(CLBO). The values of 500 mJ and 230 mJ at 266 nm and 213 nm were obtained from 2200 mJ of fundamental energy. Doping of CLBO has been carried out and the Al doping was found to give rise to an enhancement of mechanical and chemical properties.

  • PDF

HELIUM3D: A Laser-scanning Head-tracked Autostereoscopic Display

  • Brar, Rajwinder Singh;Surman, Phil;Sexton, Ian;Hopf, Klaus
    • Journal of Information Display
    • /
    • 제11권3호
    • /
    • pp.100-108
    • /
    • 2010
  • A multi-user autostereoscopic display based on laser scanning is described in this paper. It does not require the wearing of special glasses; it can provide 3D to several viewers who have a large degree of freedom of movement; and it requires the display of only a minimum amount of information. The display operates by providing regions in the viewing field, referred to as "exit pupils," which follow the positions of the viewers' eyes under the control of a multi-user head tracker. The display incorporates an RGB laser illumination source that illuminates a light engine. The light directions are controlled by a spatial light modulator, and a front screen assembly incorporates a novel Gabor superlens. Its operating principle is explained in this paper, as is the construction of three iterations of the display. Finally, a method of developing the display into one that is suitable for television applications is described.

접힌 공진기 형태의 연속 발진 티타늄 사파이어 레이저의 발진 특성 (Characteristics of a CW Ti:sapphire Laser in a Folded Geometry)

  • 강영일;차용호;남창희
    • 한국광학회지
    • /
    • 제6권4호
    • /
    • pp.282-287
    • /
    • 1995
  • 발진 파장 영역이 매우 광범위한 티타늄 사파이어를 사용하여 접힌 공진기 형태의 레이저를 제작하고 연속 발진 특성을 조사하였다. 티타늄 사파이어 결정은 $Ti^{3+}$ 도핑율이 0.15wt.%이고 두께가 4.1mm이며 양면이 Brewster 각으로 되어 있는 것을 사용하였다. Brewster 면에서는 비점수차가 발생하므로 이를 보정하기 위하여 공진기의 접힌 각도를 $15.4^{\circ}$로 조정하였다. 펌핑 광원으로는 Ar-ion 레이저를 사용하였고, 반사율 90%의 출력경을 사용하여 2W 펌핑에서 레이저 발진이 시작되었으며, 5W 펌핑에서 450mW 이상의 츨력을 얻을 수 있었다. 또한 공진기의 두 오목거울 간의 거리에 따라 출력 변화를 조사하였다.

  • PDF

전기광학적 레이저 변조기 (Electrooptic Laser Modulator)

  • 이문기
    • 대한전자공학회논문지
    • /
    • 제12권3호
    • /
    • pp.13-19
    • /
    • 1975
  • CuCl, KDP 결정체를 이용한 지그재그형 진헹파 전기광학적 레이저 변조기에 대해 자세히 해석했다. 변조기와 크기와 대역폭은 변조용 결정체의 광학적 특성및 M/W유전특성에 의해 결정됨을 알수 있다. 더욱 광손실과 M/W손실의 영향, 입사각, 회절등의 영향을 규명했고 최적 설계법을 제시했다. 중요한 결과를 요약하면 다음과 같다. (1) CuCl, KDP로 10(GHz)이상의 대역폭에서 3(watt)이하의 변조전력으로 50%변조를 얻었다. (2) 변조주파수 한계의 상한은 레이저 빔폭에 의한 차단주파수로 인해 제한된다. A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

  • PDF

모드 잠금된 펄스 레이저와 연속 발진하는 반도체 레이저를 이용한 합주파수 생성 (Sum-frequency Generation Using a Mode-locked Pulsed Laser and a Continuous-wave Diode Laser)

  • 김현학;박남훈;염동일;차명식;문한섭
    • 한국광학회지
    • /
    • 제32권2호
    • /
    • pp.62-67
    • /
    • 2021
  • 본 연구에서는 모드 잠금된 ps-펄스 광섬유 레이저와 연속 발진하는 좁은 선폭의 반도체 레이저를 이용하여 주기적 분극반전된 LiNbO3(periodically poled lithium niobate; PPLN) 결정에서 합주파수 생성 연구를 수행하였다. 모드 잠금된 펄스 레이저는 중심 파장이 1560.7 nm이고 스펙트럼의 폭은 약 1.1 nm이며, 연속 발진 반도체 레이저는 중심 파장이 1551 nm이고 스펙트럼의 폭은 약 6 MHz로 동작한다. 합주파수 생성을 효과적으로 수행하기 위해서 하나의 단일 모드 광섬유를 이용하여 PPLN 결정 내부에서 두 펌프 광원을 공간적으로 완전히 중첩하였다. 모드 잠금된 펄스 레이저와 좁은 선폭의 연속발진 반도체 레이저에 의해서 모드 잠금된 펄스 형태의 778 nm인 합주파수 생성을 스펙트럼과 시간적인 변화로 확인하였다. 본 연구 결과는 주파수 제어가 가능한 광주파수 빗(optical frequency comb)을 이용한 광주파수 측정 및 고분해 레이저 분광 연구 등 다양하게 응용될 수 있을 것으로 기대된다.

Second Harmonic Generation and Frequency Stabilization of a Diode Laser Using an External Ring Resonator

  • Kwon, Taeg-Yong;Yang, Sung-Hoon;Lee, Ho-Seong
    • Journal of the Optical Society of Korea
    • /
    • 제2권1호
    • /
    • pp.1-4
    • /
    • 1998
  • The second harmonic light of an 842 nm diode laser was generated from a KNbO3 crystal in an external ring resonator. The power of the second harmonic light was about 0.8 mV at an input fundamental power of 87 mW. The laser frequency was stabilized to the resonance frequency of the ring resonator, and the frequency fluctuation was measured as about 3 MHz.

고출력 레이저 증폭기 계열의 optical isolator 설계(I) ;Glass optics (Design of the Optical Isolator System for the High Power Pulse Laser.)

  • 이인원
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
    • /
    • pp.5-6
    • /
    • 1989
  • The overall design of the optical isolator system is prepared for the 1 TW Nd pulse laser. Two pockels cell optical switches are employed to suppress the amplified spontaneous emission and the backward reflection. The role of two Farady rotators is to protect the laser system from the light amplified after back reflection. One saturable absorber dye and one liquid crystal polarizer/isolator will also serve as optical isolator.

  • PDF

SLM 기술을 이용한 Ti-6Al-4V 합금의 고속 적층 공정 최적화 연구 (Optimization for high speed manufacturing of Ti-6Al-4V alloy by a selective laser melting technique)

  • 이강표;김강민;강석현;한준현;정경환
    • 한국결정성장학회지
    • /
    • 제28권5호
    • /
    • pp.217-221
    • /
    • 2018
  • Selective laser melting(SLM)은 적층 제조 방법 중 하나로서, 분말을 선택적으로 용융하여 기능적이고, 복잡한 형상을 즉각적으로 제작 가능하다는 장점이 있다. Ti-6Al-4V 합금의 경우 높은 융점과 산화문제로 인하여 SLM 공정도입에 어려움을 겪고 있다. 본 연구에서는 SLM 장비를 사용하여 Ti-6Al-4V 파트를 성공적으로 적층하였으며 스캔속도, 레이저 파워의 변수를 조절하여 적층 가능 조건을 도출하였다. 또한 적층 된 Ti-6Al-4V 파트의 형상 정밀도, 면밀도 및 기계적특성 평가를 통하여 일반적으로 사용되는 공정조건(스캔 속도 200~700 mm/s)으로 제작된 제작품 물성치와 비교를 통해 Ti-6Al-4V 합금의 고속 적층 영역에서의 최적 공정을 확립하였다.

Synthesis of scheelite-type nanocolloidal particles by pulsed laser ablation in liquid and their size distribution analysis

  • Lee, Jung-Il;Shim, Kwang Bo;Ryu, Jeong Ho
    • 한국결정성장학회지
    • /
    • 제24권3호
    • /
    • pp.111-119
    • /
    • 2014
  • A novel pulsed laser ablation process in liquid was investigated to prepare scheelite-type ceramic [calcium tungstate ($CaWO_4$) and calcium molybdate ($CaMoO_4$)] nanocolloidal particles. The crystalline phase, particle morphology, particle size distribution, absorbance and optical band-gap were investigated. Stable colloidal suspensions consisting of well-dispersed $CaWO_4$ and $CaMoO_4$ nanoparticles with narrow size distribution could be obtained without any surfactant. Particle tracking analysis using optical microscope combined with image analysis was applied for a fast determination of particle size distribution in the prepared nanocolloidal suspensions. The mean nanoparticle size of $CaWO_4$ and $CaMoO_4$ colloidal nanoparticles were 16 nm and 30 nm, with the standard deviations of 2.1 and 5.2 nm, respectively. The optical absorption edges showed blue-shifted values about 60~70 nm than those of reported in bulk crystals. And also, the estimated optical energy band-gaps of $CaWO_4$ and $CaMoO_4$ colloidal particles were 5.2 and 4.7 eV. The observed band-gap widening and blue-shift of the optical absorbance could be ascribed to the quantum confinement effect due to the very small size of the $CaWO_4$ and $CaMoO_4$ nanocolloidal particles prepared by pulsed laser ablation in liquid.

HPHT(고온고압)에 의해 처리된 type IIa 천연 다이아몬드의 감별에 관한 연구 (A study on the identification of type IIa natural diamonds treated by the HPHT method)

  • 김영출;최현민
    • 한국결정성장학회지
    • /
    • 제14권1호
    • /
    • pp.21-26
    • /
    • 2004
  • HPHT(고온고압) 처리된 type IIa 다이아몬드의 분광분석 결과를 나타내었다. 그리고 HPHT 처리된 다이아몬드 spectrum의 특성을 이와 유사한 color와 type을 가진 처리되지 않은 다이아몬드와 비교하였다. 325nm 에서 여기된 He/Cd laser로는 HPHT 처리된 다이아몬드와 처리되지 않은 다이아몬드에 현저한 변화가 있음을 알 수 있었는데 이는 HPHT 처리된 다이아몬드의 spectrum에서 H3, H4에 관련된 peak가 제거되고 N3 system에 관련된 peak의 emission이 증가함을 보여 주었다. 또한 514nm에서 여기된 Ar-ion laser로 측정된 spectrum은 575nm와 637.1 nm에서 Nitrogen과 vacancy가 관련되어있는 N-V center가 발견 되었는데 이러한 center가 존재하고 있을 경우 637.1 nm의 FWHM의 값은 HPHT 처리된 다이아몬드와 처리되지 않은 다이아몬드를 구분할 수 있음을 보여주었다. 본 실험에서 측정된 HPHT 처리된 다이아몬드의 637.1nm $(N-V)^-$의 FWHM 값은 $19.8{\textrm}{cm}^{-1}$에서$32.1{\textrm}{cm}^{-1}$였다.