• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.935-939
• /
• 2012

3D vibration measurement is achieved using one laser scanning vibrometer(LSV) and Laser scanner(LS) by moving the LSV to three arbitrarily locations from the principle that vibration analysis based on the frequency domain is independent of the vibration signal based on time domain. The proposed system has the same effect as using three sets of LSVs. It has an advantage of reducing equipment costs. Analytical approach of obtaining in-plane and out-of-plane vibration of surface is introduced using geometrical relations between three LSV coordinates and vibration measured at three different locations.

• 한국통신학회논문지
• /
• 제29권8C호
• /
• pp.1104-1112
• /
• 2004

본 논문에서는 레이저와 고속 CCD 카메라를 이용하여 대형 구조물의 3차원 거동 계측을 위해 진동 주파수 계측 방식을 확립하였다. 구조물에 부착한 대상판에 변동(fluctuation)이 작은 다이오드 레이저를 투사하고, 고속 CCD 카메라로 촬영한 영상에 고정도 상대측정 알고리즘을 적용하여 구조물의 변위를 측정하였다. 초당 120 프레임의 고속 카메라를 이용하고 변위에 FFT를 취해 진동주파수를 구한 경우, 0에서 40Hz까지 $\pm$0.5% 이내의 진동주파수의 정확도를 얻을 수 있다. 이를 이용하면 대형 구조물에 대해 보다 저렴하고 간단하게 고유진동수의 측정이 가능하다. 또한 GPS를 이용한 상대측위 기법과의 비교를 통해 레이저를 이용한 변위측정의 정확도를 입증함으로써, 제안한 진동주파수 측정 방법의 신뢰도와 경제성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 C
• /
• pp.1738-1740
• /
• 1996

Laser Doppler Vibrometer using heterodyne method with a 632.8 nm He-Ne laser, has been developed for the measurement of small displacement and velocity. The measurement uses heterodyne method can be made insensitive to undesired vibration effect acting the system and can yield the sign of Doppler shift at the expense of increased complexity. A Bragg cell gives a frequency shift of 40MHz for heterodyne method. Frequency Modulated output is detected by spectrum analyzer.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.69-77
• /
• 1995

This laser measurement system has been developed using He-Ne laser and photodiode. The laser beam intensity transmitted on a photodiode was disturbed by eccentrically rotating disk cam with various speeds. The photodiode and an amplifier were used to change the detected beam intensity into voltage. The digitized data through the developed system were recorded on a micro-computer by using a signal analysis program. Its reliability was ascertained by using FFT analyzer. The vibration of rotating disk cam can be analyzed by measureing the intensity change of laser beam which the results by FFT analyzer were similar to. The amplifier was devised to be able to modulate the fluctuations of laser beam. The voltage could be linearly recorded with the change of the laser beam intensity.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2011년도 춘계학술대회 논문집
• /
• pp.691-692
• /
• 2011

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.357-362
• /
• 1993

In this study low priced laser measurement system was made, so its reliability was investigated Intensity distribution of laser beam measured by devised system and FFT analyzer and their results were examined for proving reliability of devised system. Transmitted laser beam intensity on photodiode changed by eccentrically rotating of disk cam and motor speed. To get results, photodiode and devised amplifier were used for changing voltage. After that, response signal was calculated by signal analysis program. It was found that the vibration of disk cam could be measured by the intensity distribution of laser beam and the same tendency was obtained by FFT. Change of motor speed effected the distribution of laser beam,which was obtained by devised system. Also linear distribution was got by sensitive balancing switch on amplifier according to the transmission of laser beam on photodide.

• 한국항공우주학회지
• /
• 제30권1호
• /
• pp.44-48
• /
• 2002

본 논문에서는 단일 광섬유 FBG/EFPI 복합 센서를 이용하여 변형률, 온도, 그리고 진동으 세 가지 물리량을 동시에 측정하는 방법에 대해 설명하였다. 변형률과 온도를 측정하기 위한 FBG/EFPI 센서 시스템과 진동을 감지하기 위한 EFPI 센서 시스템을 wavelength division multiplexer를 이용하여 하나의 시스템으로 결합하였다. FBG/EFPI 센서 시스템의 광원은 파장 이동 광섬유 레이저(WSFL)이며 EFPI 센서 시스템의 광원은 단파장 레이저 다이오드이다. 구성된 시스템을 이용하여 열챔버에서 알루미늄 보의 열변형률, 온도, 그리고 진동의 동시 측정을 수행하여 본 시스템의 유효성을 확인하였다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.274-280
• /
• 2002

This paper addresses the vibration mode shape measurement technique utilizing a Continuous Scanning Laser Doppler Vibrometer (CSLDV). The continuous scanning capability is added to the conventional discrete Laser Doppler Vibrometer by reflecting the laser beams on the surface of the object using two oscillating mirrors. The bow scanning resulted from the proposed scanning method is eliminated by feedback control. The velocity output signal from the CSLDV is modulated to give the spatial velocity distribution in terms of coefficients which are obtained from the Fast Fourier Transformation of the time dependent velocity signal. Using the Chebyshev series form, the analysis of the vibration mode shape techniques for straight Bine scanning and 2 dimensional scanning are presented and discussed. The performance of the proposed SLDV is presented using the experimental results of the vibration mode shape of a plate

• 비파괴검사학회지
• /
• 제31권2호
• /
• pp.111-117
• /
• 2011

Vibration monitoring is required for reliable thermosonic testing to decide whether sufficient vibration is achieved in each test for the detection of cracks. From a practical point of view, a cheaper and convenient monitoring method is better for the application to real tests. Therefore, the performance of different sensors for vibration monitoring was investigated and compared in this study to find a convenient and acceptable measurement method for thermosonics. Velocity measured by a laser vibrometer and strain provide an equivalent HI when measured at the same position. The microphone can provide a cheaper vibration monitoring device than the laser and the heating index calculated by a microphone signal shows similar characteristics to that calculated from velocity measured by the laser vibrometer. The microphone frequency response shows that it underestimates high frequency components but it is applicable to practical tests because it gives a conservative value of HI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.308-313
• /
• 1995

Non-destructive inspection techniques using laser have been broading their application areas as well as growing their measurement skills together with the rapid development of circumferential technology like fiber optics and computer. The remarkable inspection technique using laser speckle, so-called ESPI is aleady on the stage of on-line testing with commercial products in other nations. Especially, this technique is expected to be applied to the nuclear industry. Because it is proper for the vibration measurement and it can be applied to objects of a high temperature. This paper describes the use of the ESPI system for measuring vibration patterns on the reflecting objects. Using this system, high-quality Jo fringers fso that fringe shift algorthms can be used to determine vibration interferograms recorded by the ESPI system.