• Restorative Dentistry and Endodontics
• /
• 제12권1호
• /
• pp.51-64
• /
• 1986

The purpose of this study is to obtain the data of prestep in cavity preparation by observing changed conditions of laser irradiated dental hard tissues. The forty five extracted caries free human molars were divided into three groups and each group into five subgroups. A $CO_2$ laser irradiation was performed each subgroup of group I for one second with output power of 5 W, 10 Wand 20 W. On group II, laser irradiation was done ten times for 0.1 second duration using same power ratings as group I. On group III, laser irradiation was done 0.1 second, 0.2 second and 0.4 second with output power of 50 W. We investigated mineral contents and crater wall of obtained specimens, i.e., laser irradiated teeth, using computer controlled electron probe microanalyzer and scanning electron microscope. The following results were obtained: 1. Both calcium and phosphorus contents in laser irradiated enamel crater wall were increased, and magnesium content was decreased, but these trends were not statistically significant. 2. In laser irradiated dentin, change of mineral content was more significant. 3. In laser irradiated enamel and dentin, there were no significant differences on mineral content change due to irradiation condition and energy density. 4. In scanning electron microscopic study, enamel rods of the crater wall were fused and clefts were observed in parallel with the direction of enamel rod for all groups. 5. In laser irradiated dentin, irregular fusion and clefts were observed. In irradiated teeth with high power and short duration, the locally formed narrow crater wall was observed.

• 한국레이저가공학회지
• /
• 제5권2호
• /
• pp.31-38
• /
• 2002

This paper describes the process of nanoparticle synthesis by laser ablation of consolidated microparticles. We have generated nanoparticles by high-power pulsed laser ablation of Al, Cu and Ag microparticles using a Q-switched Nd:YAG laser (wavelength 355 nm, FWHM 5 ㎱, fluence 0.8∼2.0 J/㎠). Microparticles of mean diameter 18∼80 ㎛ are ablated in the ambient air The generated nanoparticles are collected on a glass substrate and the size distribution and morphology are examined using a scanning electron microscope and a transmission electron microscope. The effect of laser fluence and collector position on the distribution of particle size is investigated. The dynamics of ablation plume and shock wave is analyzed by monitoring the photoacoustic probe-beam deflection signal. Nanosecond time-resolved images of the ablation process are also obtained by laser flash shadowgraphy. Based on the experimental results, discussions are made on the dynamics of ablation plume.

• 한국동물학회:뉴스레터
• /
• 제16권1호
• /
• pp.60-65
• /
• 1999

• 대한소아치과학회지
• /
• 제33권2호
• /
• pp.201-206
• /
• 2006

건전한 치질에 탄산가스 레이저의 조사로 내산성을 증가시키거나 탄산가스 레이저의 조사 전 후에 국소적 불소도포를 함께 시행함으로써 치아우식증 예방효과를 얻을 수 있다. 따라서 이 논문에서는 치아의 법랑질 평활면에 레이저를 조사한 후 법랑질 표면의 변화를 주사 전자 현미경과 원자 현미경을 통하여 관찰하고 불소도포와 레이저 조사를 병용하였을 경우의 차이 및 원자 현미경의 효율성을 알아보고자 한다. 그 결과 대조군과 비교 시 레이저를 조사한 군들에서 미세한 균열과 소와 및 입자형 성상이 관찰되었으며, 불소도포 시에는 좀더 평활한 표면을 보였다. 이러한 레이저와 불소의 병용은 치아 표면에 칼슘, 인 불소가 재흡착되어 표면에 입자형태를 보이며 이것이 치아우식증에 대한 저항성을 나타내는 원인 중 하나라고 생각된다.

• 한국생활과학회지
• /
• 제21권3호
• /
• pp.539-550
• /
• 2012

In-depth knowledge of fabric microstructure is essential for understanding clothing comfort since it plays a significant role in heat and mass transfer between the human body and clothing. In this study, a novel method was employed for investigating 3D surfaces and solid construction characteristics of specific fabrics by using a reverse engineering technique. The surface construction data were obtained by a confocal laser scanning microscope and then manipulated by a 3D analysis program. Triangle mesh was used for connecting each 3D point, with clouds and fabric surface characteristics created by rendering techniques. For generating a 3D solid model, determinants of radius of curvature was used. According to the proposed method, actual surface expression of the real fabric was achieved successfully. The results from this methodology can be applied to the detailed analysis of clothing comfort that is highly influenced by the microstructure of the fabric.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2004년도 춘계학술발표대회 및 제6회 신소재 심포지엄
• /
• pp.51-51
• /
• 2004

• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.1-8
• /
• 2001

Dental Caries which has high prevalence rate, accounts for majority of dental diseases. Many treatment and preventive treatment has been developed, thereby reducing the prevalence rate, but in our country, fluoridization has not spread widely yet, so prevention has not been done satisfactorily. When dental caries progresses, irreversible damage of tooth structure occurs. In initial dental caries, demineralizing tooth structure can be remineralized, so restorative treatment is unnecessary. In this study, 20 teeth restored with composite resin without fluoride release were used and divided into two groups. Incipient dental caries were artificially made and demineralization procedure was done for 1 and 2 weeks, for each group. Changes in mineral contents around the margins were analysed with confocal laser scanning microscope. The results were as follow. 1. Both total fluorescence of the lesion and average fluorescence of the lesion of remineralized samples decreased compared to demineralizing state. (p＜0.01) 2. Confocal laser scanning microscopy can be used in quantitative analysis of mineral change. In result, confocal laser scanning microscopy can be used in quantitative analysis of mineral change and it could be used in many different fields of dentistry in the future.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.590-595
• /
• 2004

The shape and size variations of the nanopatterns produced on a positive photoresist using a near-field scanning optical microscope(NSOM) are investigated with respect to the process variables. A cantilever type nanoprobe having a 100nm aperture at the apex of the pyramidal tip is used with the NSOM and a He-Cd laser at a wavelength of 442nm as the illumination source. Patterning characteristics are examined for different laser beam power at the entrance side of the aperture( $P_{in}$ ), scan speed of the piezo stage(V), repeated scanning over the same pattern, and operation modes of the NSOM(DC and AC modes). The pattern size remained almost the same for equal linear energy density. Pattern size decreased for lower laser beam power and greater scan speed, leading to a minimum pattern width of around 50nm at $P_{in}$ =1.2$\mu$W and V=12$\mu$m/. Direct writing of an arbitrary pattern with a line width of about 150nm was demonstrated to verify the feasibility of this technique for nanomask fabrication. Application on high-density data storage using azopolymer is discussed at the end.

• Current Optics and Photonics
• /
• 제2권6호
• /
• pp.595-605
• /
• 2018

The two-photon process of microscopy provides good spatial resolution and optical sectioning ability when observing quasi-static endogenous fluorescent tissue within an in vivo animal model skin. In order to extend the use of such systems, we developed a two-photon laser scanning microscopy system capable of also capturing $512{\times}512$ pixel images at 90 frames per second. This was made possible by incorporating a 72 facet polygon mirror which was mounted on a 55 kRPM motor to enhance the fast-scan axis speed in the horizontal direction. Using the enhanced temporal resolution of our high-speed two-photon laser scanning microscope, we show that rapid processes, such as fluorescently labeled erythrocytes moving in mouse blood flow at up to 1.2 mm/s, can be achieved.

• 비파괴검사학회지
• /
• 제16권4호
• /
• pp.234-240
• /
• 1997

기존의 Scanning Laser Acoustic Microscope (SLAM)에 횡파를 사용함으로써 분해능을 개선시키는 방법을 연구하였다. 액체-고체 경계에서는 모드 변환이 발생하여 액체에서 입사되는 종파 에너지의 일부분은 고체 시험편 내에서 횡파 에너지로 변환된다. SLAM의 분해능은 수신측의 레이저 빔 폭과 입사되는 초음파의 파장에 의하여 결정되고, 고체에서 횡파의 파장은 같은 주파수의 종파의 파장보다 짧기 때문에 횡파를 사용한다면 높은 분해능을 얻을 수 있다. 종파와 횡파를 사용하였을 때에 얻어지는 SLAM 영상을 시뮬레이션을 통하여 비교하여 횡파를 이용하면 분해능이 향상됨을 입증하였다. SLAM을 횡파 모드에서 동작시키기 위하여 입사각을 조절할 수 있는 ??지를 제작하였고, 알루미늄 시험편에 대하여 실험한 결과로부터 종파 모드 SLAM에 의한 영상보다는 횡파 모드 SLAM의 영상의 콘트라스트가 양호함을 확인하였다.