• 전기의세계
• /
• 제36권1호
• /
• pp.28-35
• /
• 1987

본고에서는 laser printer의 여러구성부분 중 화질과 직접 관련된 감광체재료의 부분에 촛점을 두는 한편 새로운 재료의 응용으로서 다양한 실험과 개선을 하고 있는 반도체 laser printer용 a-Si:H감광체의 기술동향과 문제점을 살펴보고 향후 개발방향을 기술하였다.

• EDISON SW 활용 경진대회 논문집
• /
• 제6회(2017년)
• /
• pp.566-573
• /
• 2017

Develop a leg walking robot with 'Janssen mechanism'. Using 'ScienceBox' base and add more items to improve moving speed and balance of the robot. To make the robot better, made optimized drawing and produced it using plastic with 3D printer and acyrl with Laser cutting machine.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.813-814
• /
• 2010

• 제어로봇시스템학회논문지
• /
• 제22권3호
• /
• pp.186-191
• /
• 2016

This paper addresses the development of 3D data acquisition system (3D scanner) based laser structured-light image. The 3D scanner consists of a stripe laser generator, a conventional camera, and a rotation table. The stripe laser onto an object has distortion according to 3D shape of an object. By analyzing the distortion of the laser stripe in a camera image, the scanner obtains a group of 3D point data of the object. A simple semiconductor stripe laser diode is adopted instead of an expensive LCD projector for complex structured-light pattern. The camera has an optical filter to remove illumination noise and improve the performance of the distance measurement. Experimental results show the 3D data acquisition performance of the scanner with less than 0.2mm measurement error in 2 minutes. It is possible to reconstruct a 3D shape of an object and to reproduce the object by a commercially available 3D printer.

• 제어로봇시스템학회논문지
• /
• 제22권10호
• /
• pp.811-816
• /
• 2016

In light of recently developed 3D printers for rapid prototyping, there is increasing attention on the 3D scanner as a 3D data acquisition system for an existing object. This paper presents a prototypical 3D scanner based on a striped laser light image. In order to solve the problem of shadowy areas, the proposed 3D scanner has two cameras with one laser light source. By using a horizontal rotation table and a rotational arm rotating about the latitudinal axis, the scanner is able to scan in all directions. To remove an additional optical filter for laser light pixel extraction of an image, we have adopted a differential image method with laser light modulation. Experimental results show that the scanner's 3D data acquisition performance exhibited less than 0.2 mm of measurement error. Therefore, this scanner has proven that it is possible to reconstruct an object's 3D surface from point cloud data using a 3D scanner, enabling reproduction of the object using a commercially available 3D printer.

• 대한기계학회논문집A
• /
• 제24권1호
• /
• pp.269-274
• /
• 2000

Frictions and electrical contact voltages of the herringbone-grooved hydrodynamic bearing(HHB) were 9, measured to use in a laser scanner motor. This bearing with varying loads, speeds, oil viscosity, and radial clearances successfully operated up to 28,000rpm and 0.5N. Experimental results under various environments confirmed that this bearing had excellent performance with low friction force, and operated without contact between shaft and sleeve.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.829-836
• /
• 2000

High performance laser printer requires high speed scanning motor, which can operate up to 40,000 rpm. However, development of high speed scanning motor has been restricted due to the practical problems such as use of high speed bearing, compact circuit design and high cost. In this study, we designed a high speed scanner motor for use on laser scanning unit and discussed some design principles including the reduction method of cogging torque of the motor, development of hemispherical aerodynamic bearing, windage loss estimation, and operating circuit design to reduce noise.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.22-29
• /
• 2011

We analyze aberrations in an optical laser printer system in order to know how to determine an allowable non-uniformity of the movement of a light spot, how to determine allowed variation of spot sizes, and how to minimize the influence of these deviations on technological errors. In this paper, the correction and the tolerance of distortion are analyzed by using the concept of zonal and global distortions. The tolerance of field curvature is also obtained from Gaussian beam properties. In order to reduce the change of the entrance pupil position and to make a more compact laser printer system the minimum size of the rotator is exactly derived from the geometry with the introduction of the shift angle of the input beam.

• 마이크로전자및패키징학회지
• /
• 제26권1호
• /
• pp.17-21
• /
• 2019

본 논문에서는 공작기계 등에서 필요로 하는 진직도 측정시스템을 가시광의 레이저와 CMOS 이미지센서를 사용하여 저가로 구현하였다. CMOS 이미지센서를 이용하여 광이미지를 검출하고 영상처리를 통해 진직도 변화를 계산하였다. 레이저와 이미지센서의 거리를 3m로 하여 실험한 진직도 측정에서 오차가 0.9%로 우수함을 확인하였으며, 제작된 진직도 시스템은 3D 프린터 등 다른 응용분야에서도 사용 할 수 있을 것으로 생각된다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 광학 및 양자전자학 워크샵
• /
• pp.94-99
• /
• 1989