• 화약ㆍ발파
• /
• 제22권3호
• /
• pp.103-111
• /
• 2004

기존 절리측정 방법은 크게 시추공을 이용한 측정방법과 수치사진측량을 이용한 측정 방법으로 나눌 수 있다. 그러나 이러한 측정방법은 공간적 제약과 국한된 구간에서의 자료의 획득, 측정시의 오차로 전반적 인 절리 자료의 획득에는 한계를 가질 수밖에 없었으며, 객관적이고 정확한 결과를 얻기엔 무리가 있었다. 이러한 기존 절리측정 방법의 난점을 극복하고 정확도 및 효율성을 극대화 할 수 있는 방안으로 3차원 레이저 스캐너를 이용한 측정방법을 제시하고자 한다. 본 연구에서는 암반사면을 대상으로 3차원 레이저 스캐너를 이용한 절리측정의 정확성 및 활용 가능성을 연구하였다. 이를 위하여 레이저 스캐너와 클리노미터를 이용하여 대상사면의 절리를 측정하였으며, 이를 비교 분석하였다. 레이저 스캐너와 클리노미터로 측정한 절리 분포 및 절리군의 방향성을 비교한 결과, 절리의 분포는 거의 동일하게 투영되었으며, 3차원 스캐너를 이용한 결과에서는 다수 절리의 획득으로 클리노미터로 측정한 부분보다 더 많은 절리 데이터를 얻을 수 있었다. 따라서 암반사면조사 자료의 객관화, 조사기간의 단축, 조사 경비 절감 등의 효과가 있으며, 암반사면의 근접조사가 어려운 경우에도 조사가 가능하고 조사자의 안정성도 확보할 수 있어 절리측정에 매우 효과적인 방법임을 알 수 있었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2004년도 Proceedings of ISRS 2004
• /
• pp.128-131
• /
• 2004

In this paper, we describe reconstructed 3D-urban modeling techniques for laser scanner and CCD camera system, which are loading on the vehicle. We use two laser scanners, the one is horizon scanner and the other is vertical scanner. Horizon scanner acquires the horizon data of building for localization. Vertical scan data are main information for constructing a building. We compared extraction of edge aerial image with laser scan data. This method is able to correct the cumulative error of self-localization. Then we remove obstacles of 3D-reconstructed building. Real-texture information that is acquired with CCD camera is mapped by 3D-depth information. 3D building of urban is reconstructed to 3D-virtual world. These techniques apply to city plan. 3D-environment game. movie background. unmanned-patrol etc.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.567-569
• /
• 2006

Recently, the terrestrial laser scanner is considered as useful measurement equipment for acquiring a three-dimensional data. In this study, a terrestrial laser scanner which has +/- 2.5cm accuracy is examined whether the terrestrial laser scanner is reliable to present the tendency of landslide movement. The test area is covered by protection blocks, and they are being moved by landslide movement. Landslide movement was detected by measuring the movement of protection blocks. Totally three scenes of test area were acquired during 2004 and 2006. The three scenes of the protection blocks were registered in global coordinate system, then the landslide movement was investigated. The landslide movement detected in the three scenes was evaluated by comparing with landslide movement measured by a total station. Although the measurement accuracy of landslide using the terrestrial laser scanner was worse than the total station, the scanning data showed the tendency of landslide movement of the test area.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제9권3호
• /
• pp.232-237
• /
• 2009

Active safety vehicle devices are getting more attention recently. To prevent traffic accidents, the environment in front and even around the vehicle must be checked and monitored. In the present applications, mainly camera and radar based systems are used as sensing devices. Laser scanner, one of the sensing devices, has the advantage of obtaining accurate measurement of the distance and the geometric information about the objects in the field of view of the laser scanner. However, there is a problem that detecting object occluded by a foreground one is difficult. In this paper, criterions are proposed to manage this problem. Simulation is conducted by vehicle mounted the laser scanner and multiple-hypothesis algorithm tracks the candidate objects. We compare the running times as multi-hypothesis algorithm parameter varies.

• 전기학회논문지
• /
• 제57권4호
• /
• pp.677-685
• /
• 2008

This paper proposes algorithm for the obstacle detection and classification using a single laser scanner. In a measurement data from a laser scanner, there exist points with large differential value called singular points, which can be used to obtain the boundary of an obstacle such that obstacle information can be analyzed. On the other hand, measurement data include a lot of measurement error, which makes it difficult to analyze the accurate obstacle information. To solve this problem, the least square estimation algorithm is used to obtain the accurate information using a single laser scanner, by compensation for the measurement error. This algorithm can be used for the effective obstacle avoidance of mobile robots, and the experimental results are included to demonstrate the effectiveness of the propose algorithm.

• 한국레이저가공학회지
• /
• 제9권2호
• /
• pp.11-15
• /
• 2006

We report experimental results on the high-speed micromachining using a femtosecond laser (800 nm, 130 fs, 1kHz) and galvanometer scanner system (Raylase, Germany). Periodic hole drilling of silicon and glass with the scan speed of 1-20 mm/s is demonstrated. Finally, we demonstrate the utility of the femtosecond laser application to ITO patterning by using a high-speed femtosecond laser scanner system.

• 한국자동차공학회논문집
• /
• 제22권4호
• /
• pp.138-144
• /
• 2014

Now, Autonomous unmanned vehicle has become an issue in next generation technology. 2D Laser scanner as the distance measurement sensor is used. 2D Laser scanner detects the distance of 80m, measured angle is -5 to 185 degree. Laser scanner detects only the plane, but using motor swings. As a result, traffic signs detect and analyze patterns. Traffic signs when driving at low speed, shape of the detected pattern is very similar. By shaking the laser scanner, traffic signs and other obstacles became clear distinction.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.854-861
• /
• 2005

Studied accuracy and practical use possibility of joint measurement that using 3D laser scanner to rock slope. Measured joint of Rock slope and comparison applied 3 dimension laser scanner and clinometer. 3D laser scanning system preserves on computer calculating to 3 dimension coordinate scaning laser to object. and according to laser measurement method of interior, produce correct vector value from charge-coupled device(CCD) or laser reciver and telegram register and time measuring equipment. Create of object x, y, z point coordinates to 3 dimension space of computer. Such 3 dimension point datum (Point Clouds) forms relocate position informations that exist to practical space to computer space. Practical numerical values related between each other. Compared joint distribution and direction that measured by laser scanner and clinometer. By the result, Distribution of joint projected almost equally. Could get more joint datas by measurement of 3 dimension scanner than measured by clinometer. Therefore, There is effect that objectification of rock slope investigation data, shortening of investigation periods, investigation reduction of cost. could know that it is very effective method in joint measuring.

• 한국해양공학회지
• /
• 제32권6호
• /
• pp.511-517
• /
• 2018

This paper proposes a vision-based underwater laser scanner with separate structures for an underwater camera and a line laser projector. Because the two devices can be adaptively placed regardless of the features of the unmanned underwater vehicle (UUV), the scanner has significant advantages in relation to its availability and flexibility. Position calibration between the underwater camera and laser projector guarantees a 3D measuring performance with high accuracy. To verify the proposed underwater laser scanner, a test-bed system was manufactured, which consisted of the laser projector, camera, Pan&Tilt, and Attitude and Heading Reference System (AHRS). A camera-laser calibration test and simple 3D reconstruction test were performed in a water tank and the experimental results are reported.

• 한국터널지하공간학회 논문집
• /
• 제13권3호
• /
• pp.159-176
• /
• 2011

현재 3차원 레이저 스캐너는 게임, 영화, 의료, 미술, 디자인 분야 등 다양한 분야에서 널리 사용되고 있다. 토목분야에서는 교량 및 터널에 3차원 레이저 스캐너를 이용한 시공관리 방안 및 적용에 관한 연구가 다수 수행되었다. 그러나 3차원 레이저 스캐너로 얻어진 데이터의 용량이 너무 크고 우리나라 현장 실정에 적합한 소프트웨어가 없는 것이 현실이다. 따라서 본 연구에서는 3차원 레이저 스캐너의 데이터를 신속하게 처리할 수 있도록 데이터베이스를 구축하였으며, 터널의 미굴 여굴 여부 판단, 균열 누수 백태를 확인할 수 있는 소프트웨어를 개발하였다. 또한 실제 터널 현장에 3차원 레이저 스캐너를 사용하여 3차원 레이저 스캐너와 소프트웨어를 검증하였다. 이는 터널 시공 중 시공관리 및 시공 후 유지관리에도 기여할 수 있을 것으로 예상된다.