• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.497-510
• /
• 2018

In this study, the decay resistance of larch wood, which was heat treated by superheated steam, was evaluated by the field decay test. During the field decay test of 12 months, non-treated wood has been severely damaged by termite, however, no visible damage has occurred in the preservative-treated wood and superheated steam heat-treated wood. Results of field decay test showed approximately 5% mass loss of the non-treated wood and the preservative-treated wood, and approximately 1% mass loss of the superheated steam heat-treated wood. After the field decay test for 12 months, the residual amount of preservatives remaining in the preservative-treated wood was lower than that before the field decay test. It was considered that the preservative was partially eluted during the field decay test, and the mass loss of the preservative-treated wood was thought to be similar to that of the non-treated wood. Through this study and additional long-term monitoring test, superheated steam heat treatment can be considered to be an environmental-friendly method to enhance the decay resistance of wood against rot fungi and/or insect without chemical treatment such as preservative injection.

• Journal of the Korean Wood Science and Technology
• /
• v.30 no.1
• /
• pp.40-47
• /
• 2002

This study was carried out to investigate the dimensional stability of three softwoods (Pinus densiflora S. et Z., Pinus koraiensis S. et Z., Larix kaempferi C_ARR.) and two hardwoods(Quercus mongolica F., Quercus variabilis B_L.) treated with polyethylene glycol(PEG). Existence of PEG in wood was examined by an X-ray diffraction method. Shrinkage of the sample woods decreased with increasing concentration of PEG. The dimensional stability of five species had improved highly in thirty percent solutions of PEG with molecular weight 1000~4000, and the dimension of PEG-treated softwoods was more stable than that of PEG-treated hardwoods. Weight gain and bulking effect of the woods treated with PEG increased with increasing concentration of PEG. X-ray diffractograms of Pinus koraiensis wood treated with PEG showed two peaks derived from PEG crystal at 2𝜃 = 19° and 2𝜃 = 23°. However, the diffractograms of Quercus mongolica wood did not present any peaks caused by PEG crystal. From the result of X-ray diffraction, it was revealed that the content of PEG in Pinus koraiensis wood was higher than that in Quercus mongolica wood.

• Journal of Korean Society of Forest Science
• /
• v.98 no.4
• /
• pp.379-391
• /
• 2009

This study was carried out to classify forest vegetation structure of Mt. Munsu and Mt. Okseok from May to September in 2008 using phytosociological analysis methodology of Z-M school under the purpose of furnishing basic materials for rational and scientific forest management. Total of one hundred five study sites (quadrats) was investigated in the area. Quercus mongolica community group was divided into 5 communities such as Pinus densiflora for. erecta community, Hydrangea serrata for. acuminata community, Salix gracilistyla community, Pinus koraiensis community and Larix kaempferi community. Pinus densiflora for. erecta community was subdivided into Rhododendron micranthum group, Quercus variabilis group and Pinus densiflora for. erecta typical group. Hydrangea serrata for. acuminata community also into Ligularia fischeri group, Deutzia glabrata group (into Juglans mandshurica subgroup, Prunus maackii subgroup and Callicarpa japonica subgroup). Accordingly, the vegetation of the study areas could be described as 1 community group, 5 communities, 5 groups, and 3 subgroups and as 10 units in total. Classified vegetation units were highly correlated with altitude and topography. According the analysis of interspecific association, it was shown as three types which were coincident with differential species and character species on the constancy table.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2011

Recently, the visual grading rule of Korea Forest Research Institute (KFRI) was revised and it is necessary to investigate the distribution characteristics of visual graded lumber in accordance with the revised rule. Therefore, in this study, the distribution characteristics of bending strength was investigated with revised visual grading rule and changed prior rule, respectively. The size of specimens was $38{\times}140{\times}3,000$ (mm) and the species were $Larix$ $kaempferi$ and $Pinus$ $koraiensis$. The moisture content was under 18% and the specimens were tested in accordance with ASTM D-198. The number of No. 1 and 2 grades, suitable for structural lumber, was increased when the revised visual grading rule was applied. Moreover, the revised rule was more effective to distinguish sharply between No. 1 and 2 grades and below No. 3 grade. Meanwhile, the lower 5% exclusion limit and allowable stresses were generally decreased when revised visual grading rule had been applied. However, the announcement of Korea Forest Service, tested with small clear specimen, was much lower than the allowable stresses of this test, tested with structural lumber. Therefore, the revision of allowable design values should be considered for more exact use and effective structural design.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.3
• /
• pp.258-268
• /
• 2011

This study was conducted to investigate the effects of sawdust size and moisture content, pelletizing temperature and time on the durability of the pellets fabricated with larch and tulip tree sawdust. The durability of larch-pellet was significantly higher than that of tulip tree-pellet. For the larch-pellets, the durability of the pellets fabricated with > 18 mesh sawdust was higher than that of 8~18 mesh sawdust. With the increases of pelletizing temperature and time, the durabilities of larch- and tulip tree-pellets steadily improved. The durabilities of larch- and tulip tree-pellets also increased as the moisture content of sawdust increased. In the comparison of durabilities between commercial pellets and larch- or tulip tree-pellets, the pellets fabricated with larch and tulip tree sawdusts in our study were less denser than commercial pellets, but the durability of most larch-pellets was satisfied with the 1st-grade pellet standard designated by Korea Forest Research Institute. In addition, the durability of tulip tree-pellets were higher than that of the 3rd-grade pellet standard. From the scanning electron microscopic observation of larchand tulip tree-pellets, the gap between the sawdusts of each pellet was reduced with the increases of pelletizing temperature and time. In particular, it was visually confirmed that the surface of the pellets made with the pelletizing temperature of $180^{\circ}C$ for 3 min did not differ from that of commercial pellets.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.480-486
• /
• 2017

This study was conducted to develop the merchantable stem volume models to predict the volume up to upper diameter or upper height out of the total stem volume, targeting on Pinus densiflora, Pinus koraiensis, and Larix kaempferi in South Korea. The 131 stemmed sample trees for stem analysis were used as the data for developing the models. The six kinds of merchantable volume equations including merchantable volume ratio form, ratio form, and exponential ratio form were examined to develop the best models. The two models were finally selected as the best models to predict the merchantable volume: $V_d=V_t\{{\exp}[{\alpha}_1(d^{{\alpha}_2}/D^{{\alpha}_3})]\}$ for upper diameter and $V_h=V_t\{1+{\beta}_1(P^{{\beta}_2}/H^{{\beta}_3})\}$ for upper height. By rearranging the best model equations, implicit taper functions were derived, and the estimation was performed for the upper height by upper diameter and upper diameter by upper height. Because of not only the high accuracy but also the convenience, the models developed in this study were considered to be easily applicable in the field of forestry.

• Journal of Korean Society of Forest Science
• /
• v.110 no.3
• /
• pp.341-354
• /
• 2021

A large part of Gapyeong is occupied by Korean pine (Pinus koraiensis) and Japanese larch (Larix kaempferi) plantations. Abies holophylla stands are scattered throughout Gapyeong, but little information on their distribution is available. This study explored the potential of succession from planted species to native A. holophylla in plantations. Trees were inventoried and regeneration of A. holoplhylla and stand management history were examined in Korean pine, Japanese larch, and A. holophylla-dominated stands. The importance percentage of A. holophylla was the highest among species with a range of 36.1% to 79.1% in all stands and the density of A. holophylla in understory (DBH <2 cm or <1.3 m height) ranged from 50 to 5,820 trees ha^-1. Non-metric multidimensional scaling classified stands into four types, AN, AP, AM, and P. The AN type showed a reverse J-shape DBH distribution, which was similar to that in natural A. holophylla stands. Both AP and AM types included Korean pine plantations with A. holophylla seed trees within stands. For AP, A. holophylla competed with planted species in overstory and deciduous broadleaved species in understory. The AM type was once thinned from below, thus stem density in the mid DBH classes was lower than upper or lower DBH classes. The P type consisted of plantations without A. holophylla seed trees. However, understory regeneration of A. holophylla was abundant through seed supply from A. holophylla in adjacent stands. Plantations with A. holophylla seed trees within or in adjacent stands showed vigorous natural regeneration of A. holophylla, highlighting the potential for succession from planted species to native A. holophylla in the Gapyeong area. Further studies can help develop techniques to restore plantations to native species-dominated natural stands using ecological succession.

• Journal of Korean Society of Forest Science
• /
• v.108 no.2
• /
• pp.147-167
• /
• 2019

This study was conducted to analyze forest vegetation structure in the Marugeum (Ridge) area of Gitdaebaegibong to Jukryeong, Baekdudaegan. Data were collected in 298 quadrates through a Braun-Blanquet vegetation survey from April, 2018 to October, 2018. Forest vegetation was classified into 13 vegetation units. A Quercus mongolica community was divided into Morus bombycis, Filipendula glaberrima, Fraxinus sieboldiana, Prunus maackii unit and Q. mongolica typical unit. The M. bombycis unit was further classified into a Deutzia glabrata group and M. bombycis typical group. The F. glaberrima unit was subdivided into a Veratrum oxysepalum group, Arundinella hirta group, and F. glaberrima typical group. The F. sieboldiana unit was divided into a Pinus densiflora group, Larix kaempferi group, and F. sieboliana typical group. The relationship between vegetation units and environmental factors was studied through coincidence analysis and CCA. The F. glaberrima unit (VU 6~8) was distributed by elevation above 1,200 m and other vegetation units were distributed below 1,200 m. Results of the CCA analysis showed that the F. glaberrima unit distribution is positively correlated with elevation. As a result of species diversity, the F. glaberrima unit was higher than other vegetation units. A similarity index analysis revealed that the F. sieboldiana unit (VU 9~11) was relatively homogeneous, and the M. bombycis unit (VU 1~5) and A. girta group (VU 7) were relatively heterogeneous. A detrended correspondence analysis determined that the distance between the statistical axes of the M. bombycis and F. glaberrima units was the greatest, which is consistent with the analysis of the similarity index. As a result of interspecific correlation of major woody plants, hydrophilic species were positively correlated, and a negative correlation was found between Q. mongolica and intolerant species such as P. densiflora and L. kaempferi.

• Journal of Korean Society of Forest Science
• /
• v.102 no.3
• /
• pp.398-406
• /
• 2013

Afforestation/reforestation (A/R) clean development mechanism (CDM) is the only forestry-based activities allowed under the Kyoto protocol. This study was conducted to develop a methodology to estimate greenhouse gas (GHG) removals of a small scale A/R CDM pilot project in Goseong, Gangwon Province, Korea. AR-AMS0001 was applied as a methodology and selected tree species were Pinus koraiensis, Larix kaempferi, and Betula platyphylla for total area of 75.0 ha. To improve the accuracy on the GHG removals estimation, selection of the baseline scenario and carbon pools and stratification of the project site were conducted. Based on the developed methodology, net anthropogenic GHG removals were estimated as actual net GHG removals, subtracted by baseline net greenhouse gas removals and leakage. As a result, anthropogenic GHG removals of the project were 12,415 ton $CO_2-e$ and 165.5 ton $CO_2-e/ha$. This project is the first A/R CDM in domestic site and could enhance the technical accuracy of the GHG removals estimation by using countryspecific data reflecting the site condition.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.4
• /
• pp.268-274
• /
• 2012

To perform quick measurements of black carbon (BC) particles deposited on foliar surfaces of forest tree species, we investigated an optical method for measuring the amount of BC extracted from foliar surfaces and collected on quartz fiber filters. The seedlings of Fagus crenata, Castanopsis sieboldii, Larix kaempferi and Cryptomeria japonica were exposed to submicron BC particles for one growing season (1 June to 7 December 2009). At the end of the growing season, the leaves or needles of the seedlings were harvested and washed with deionized water followed by washing with chloroform to extract the BC particles deposited on the foliar surfaces. The extracted BC particles were collected on a quartz fiber filter. The absorption spectrum of the filters was measured by spectrophotometer with an integrating sphere. To obtain the relationship between the absorbance of the filter and the amount of BC particles on the filter, the amount of BC particles on the filter was determined as that of elemental carbon (EC) measured by a thermal optical method. At wavelengths below 450 nm, the absorption spectrum of the filter showed absorption by biological substances, such as epicuticular wax, resulting in the low coefficient of determination ($R^2$) in the relationship between the amount of EC on the filter ($M_{EC}$, ${\mu}g\;C\;cm^{-2}$ filter area) and the absorbance of the filter. The intercept of the regression line between $M_{EC}$ and the absorbance of the filter at 580 nm ($A_{580}$) was closest to 0. There was a significant linear relationship between the $A_{580}$ and $M_{EC}$ ($R^2$=0.917, p<0.001), suggesting that the amount of BC particles collected on the filter can be predicted from the absorbance. This optical method might serve as a simple, fast and cost-effective technique for measuring the amount of BC on foliar surfaces.