• Bulletin of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.281-287
• /
• 2001

Self-assembled monolayers (SAMs) of the alkylthiols with [Os(bpy)3]2+ moiety at the terminal position were prepared on gold electrode surface. Examination of the cyclic voltammograms for the SAM shows that it does not organiz e well unlike alkylthiols, which is attributed to the much larger diameter of [Os(bpy)3]2+ moiety compared with the cross-section of alkyl chains and the distance between the adsorption sites. Electromicrogravimetry study shows that the hydration numbers of the electrolyte were 16 $\pm2$, 11 $\pm1$, 5 $\pm$ 1 and 24 $\pm6$ for ClO4- , PF6-, NO3- , and SO42- , respectively. The binary SAMs of alkylthiols with [Os(bpy)3]2+ terminal-group were prepared by co-adsorption of alkylthiols as spacer molecules, which results in better packing in SAM and accordingly the stability was enhanced.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.899-904
• /
• 2001

The impact of PVD coatings can be summed up in practical terms: this technology historically complements the best designed tool substrates to enhance cutting performance. PVD coatings are now incorporated in 25% of all HSS tools. The functionality is to extend the machining speed range, improve wear resistance at the cutting edge, and reduce friction at chip/tool contact areas to allow easier chip evacuation. These translate to a larger safe zone, as discussed in the failure mode diagram, for better productivity and higher reliability in machining operations of the customer. PVD coatings therefore represent an enabling technology that extends the application range of cutting tools in response to modern industrial needs. PVD coatings prolong the product life cycle of HSS tools and help this "mature" material to hold its territory against the advent of the newer hardmetal and ceramic tool materials. There is a lot of competitive life left particularly in PVD coated HSS endmills, drills, threading/tapping tools. PM HSS technology further increases the possibilities.ibilities.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.188-189
• /
• 2022

With the development of nano-reinforcement technology, TiO₂ nanomaterials have received widespread attention as one of the additives without pozzolanic reaction, which can be used to improve the mechanical properties of cement-based materials. Meanwhile, with the development of additive manufacturing technology or known as 3D printing technology, its application in the construction field has also got noticed. Therefore, in this work, the effect of three sizes of TiO₂ on the compressive strength of hardened cement-based materials fabricated by binder jetting 3d printing was evaluated. According to the results, the TiO₂ particles with larger sizes can provide better reinforcement to the hardened cement due to its more significant filling effect.

• Structural Engineering and Mechanics
• /
• v.12 no.2
• /
• pp.135-156
• /
• 2001

Analytical solutions and finite element results of laminated composite plates with smart material layers embedded in them are presented in this study. The third-order plate theory of Reddy is used to study vibration suppression characteristics. The analytical solution for simply supported boundary conditions is based on the Navier solution procedure. The velocity feedback control is used. Parametric effects of the position of the smart material layers, material properties, and control parameters on the suppression time are investigated. It has been found that (a) the minimum vibration suppression time is achieved by placing the smart material layers farthest from the neutral axis, (b) using thinner smart material layers have better vibration attenuation characteristics, and, (c) the vibration suppression time is larger for a lower value of the feedback control coefficient.

• Journal of Sericultural and Entomological Science
• /
• v.17 no.1
• /
• pp.69-74
• /
• 1975

This report was aimed to examine the status of raw silk quality and to come up with means of the good quality silk production by use of the statistical quality control method. The results obtained are as follow ： 1) The raw silk quality of size 20/22 denier was found to be 2A grade during the last five years. 2) In order to level up the silk grade, the better quality control is required especially in the average evenness and cleanness. 3) It was found that winding brakes and elongation of silk threads have been versed gradually through the period. 4) Larger variation was observed in cleanness control chart, but low evenness have stayed with in the desirable control range.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.3
• /
• pp.81-98
• /
• 1997

Given a rooted tree T with profits and node demands, the capacitated subtree of a tree problem (GSTP) consists of finding a rooted subtree of maximum profit, subject to having total demand no larger than the given capacity H. We first define the so-called critical item for CSTP and find an upper bound on the optimal value of CSTP in O(n$^{2}$) time, where n is the number of nodes in T. We then present our branch and bound algorithm for solving CSTP and illustrate the algiruthm by using an example. Finally, we implement our branch-and-bound algorithm and compare the computational results with those for both CPLEX and a dynamic programming algorithm. The comparison shows that our branch-and-bound algorithm performs much better than both CPLEX and the dynamic programming algorithm, where n and H are the range of [50, 500] and [5000, 10000], respectively.

• Environmental and Resource Economics Review
• /
• v.10 no.3
• /
• pp.367-386
• /
• 2001

In this paper we analyze the environmental advantages of district heating system. We construct three econometric models to analyze the energy consumption and economic cost as well as the emission of the major pollutants like $SO_x$, $NO_x$, DUST, and $CO_2$. As the size of heating supply is larger, the district heating system is evaluated to be better than other heating systems environmentally and costly in the long run. Especially, the district heating reduces $SO_x$ emission significantly when the size of heat production is large. But the advantages of district heating system are very sensitive to the fuel mix and heat source.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.292-295
• /
• 1999

We investigated the effects of Pd impurities on cube-textures in cold rolled and recrystallized PtPd tapes The sample were made from Pt$_{1-x}Pd_x$ alloys (x from 0 to0.34) by rolling at low temperature. The thickness of the tapes were about 100 ${\mu}$m. The PtPd[111] pole figures of X-ray Diffraction for all the samples indicated similar deformed textures. But the recrystallized textures after annealing showed that a better cube texture was formed in the sample of larger x. The final textures were sensitive to annealing time and temperature when x was increased.

• International Journal of Automotive Technology
• /
• v.5 no.1
• /
• pp.23-31
• /
• 2004

Secondary movements of piston in the bore clearance are closely related to the side impact to the engine block as well as many tribological problems. Some of the major parameters that influence these kinds of movements are piston profile shapes (barrel and flat), piston pin offsets and the magnitudes of bore clearances. In our study, computational investigations are performed about the piston movements in the bore clearance by changing the skirt profiles and piston offsets. In this work, it is found that curved profile and larger offset magnitude to thrust side provide better performance that has low side impact during the engine cycle.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.2
• /
• pp.593-607
• /
• 2016

This paper analyzes interference alignment in the two-way relay network with compute-and-forward in both single relay and multiple relays networks. The advantages of compute-and-forward over other relaying strategies are that it can relay only linear combinations of the useful signals and remove the noise. The algorithm proposed in this paper adopts the criterion of maximum SINR to derive the pre-coding matrix. The experimental results show that the performance of interference alignment in two-way relay channel via compute-and-forward is better than that of amplify-and-forward, and the total sum rate in the two-way multiple relay networks is larger than that in the two-way single relay networks.