• 제목/요약/키워드: Larger-the-Better

검색결과 1,393건 처리시간 0.032초

Noise Reduction of Muffler by Optimal Design

  • Oh, Jae-Eung;Cha, Kyung-Joon
    • Journal of Mechanical Science and Technology
    • /
    • 제14권9호
    • /
    • pp.947-955
    • /
    • 2000
  • This paper proposes an optimal design scheme to improve the muffler's capacity of noise reduction of the exhaust system by combining the Taguchi method and a fractional factorial design. As a measuring tool for the performance of a muffler, the performance prediction software which is developed by Oh, Lee and Lee (1996) is used. In the first stage of a design, the length and radius of each component of the current muffler system are selected as control factors. Then, the $L_{18}$ table of orthogonal arrays is adopted to extract the effective main factors. In the second stage, the fractional factorial design is adopted to take interactions into consideration, which the $L_{18}$ table of orthogonal arrays can not consider. For an optimal design, the $L_{27}$ table of orthogonal arrays with main and interaction effects is proposed and the noise factors such as temperature, background noise and humidity are analyzed for more efficient design simultaneously.

  • PDF

제트 질량 변수 조절에 의한 성형작약 관통성능 증대 연구 (A Study on the Improvement of Penetration Capability of a Shaped Charge by Controlling the Jet Mass Parameters)

  • 소병관
    • 한국군사과학기술학회지
    • /
    • 제18권5호
    • /
    • pp.566-573
    • /
    • 2015
  • The most important factor for the penetration performance of shaped charge is the liner design. By designing the liner to have properties of both high jet tip velocity and long jet break-up time, the better penetration performance could be acquired. Usually it is very difficult to satisfy above two conditions simultaneously. In this study, the liner with the shape of ogive was developed to have relatively larger jet mass compared to the conventional trumpet liner. The designed shaped charge showed jet properties with high jet tip velocity and long jet break-up time by using ogive liner and wave shaper. A commercially available hydro-dynamic code AUTODYN-2D was used for numerical analysis of jet formation. The flash X-ray test and the static penetration test were conducted to verify the results of numerical analysis.

여러 종류의 에폭시/이종무기물 혼합 콤포지트의 전기적 교류 절연파괴 특성 (Electrical AC Insulation Breakdown Characteristics of Various Epoxy / Heterogeneous Inorganic Mixed Composite)

  • 박재준
    • 전기학회논문지
    • /
    • 제67권11호
    • /
    • pp.1463-1470
    • /
    • 2018
  • In this study, 20 types of samples were prepared by mixing different kinds of inorganic materials to develop insulation materials for epoxy - based GIS substation equipment used under high voltage environmentally friendly insulation gas. One of the electrical characteristics, AC insulation breakdown experiment was performed. As mixing ratio of mixed heterogeneous inorganic materials, the dielectric breakdown strength was increased with increasing filler ratio of micro silica, micro silica : micro Alumina, 1:9, 3:7, 5:5, 7:3, 9:1, and decreased as the filling amount of micro alumina increased. The AC insulation breakdown characteristics were the best when the composition ratio was 9:1. The higher the content of silica, the better the interfacial properties, and the larger the alumina content ratio, the worse the interfacial properties.

여대생의 가정환경과 결혼생활계획과의 관련연구 (A Study on Correlations between Socioeconomical Environments of the College Girls and their Marriage Life Plannings)

  • 김혜선
    • 대한가정학회지
    • /
    • 제17권4호
    • /
    • pp.107-115
    • /
    • 1979
  • A statistical study was carried out in order to find out the correlation between various factors affecting the attitude of young college girls to their marriages, such as their environment and the degree of their parent's satisfaction in their marriage life. For the study, 264 college girls were sampled at random from the population of college girls in Daejeon area. The instruments used in the research are questioning paper , which the investigators made. Following correlations were found as a result. (1) a significant correlation between the birth order of girls and those of male mate and earlier marriage in the bigger residential district. (2) Preferrence in larger family planning tendency in the group of girls from large family and vice versa in the group of girls little educated mothers. (3) More traditional attitude to future marriage planning in the group of girls of lower birth order and with better economical background. (4)There were no significant correlations between the degree of their parent's satisfaction and their marriage life planning.

  • PDF

비구조적 불확실성이 존재하는 DC모터에 대한 외란관측기 기반 제어기의 강인성에 대한 연구 (On the Robustness of Disturbance Observer based Controller for DC Motor with Unstructured Uncertainty)

  • 조남훈
    • 전기학회논문지
    • /
    • 제66권1호
    • /
    • pp.66-71
    • /
    • 2017
  • In this paper, we study the robustness of disturbance observer based controller for DC motor in the presence of unmodeled dynamics. It is well known that the robustness property usually becomes weaker as the control gain becomes larger. On the contrary to this expectation, it is shown that the phase margin of DOB controller remains quite a large value even though the time constant of Q-filter becomes smaller. The computer simulation results show that DOB controller is able to stabilize the motor system even in the presence of unmodeled dynamics. On the contrary, the unity-feedback system fails to maintain stability when a high gain feedback is employed for the purpose of achieving better disturbance attenuation performance.

The Effects of DEM Resolution on Hydrological Simulation in BASINS-HSPF Modeling

  • Jeon, Ji-Hong;Yoon, Chun-Gyung
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 2002년도 학술발표회 발표논문집
    • /
    • pp.453-456
    • /
    • 2002
  • In this study, the effect of DEM resolution (15m, 30m, 50m, 70m, 100m, 200m, 300m) on the hydrological simulation was examined using BASINS (Better Assessment Science Integrating point and Nonpoint Source) for Heukcheon watershed (303.3km2) data from 1998 to 1999. Generally, as the cell size of DEM increased, topographical changes were observed as the original range of elevation decreased. The processing time of watershed delineation and river network needed more time and effort on smaller cell size of DEM. The larger DEM demonstrated had some errors in the junction of river network which might effects on the simulation of water quantity and quality. The area weighted average watershed slope became lower but the length weighted average channel slope became higher as the DEM size increased. DEM resolution affected substantially on the topographical parameter but less on the hydrological simulation. Considering processing time and accuracy on hydrological simulation DEM mesh size of 100m is recommended for this watershed.

  • PDF

퇴적 목분의 훈소층 전파에 관한 연구 (A Study on the Smoldering Zone Spread of the Heaped Saw-Dust)

  • 정국삼;강민호
    • 한국안전학회지
    • /
    • 제12권3호
    • /
    • pp.90-96
    • /
    • 1997
  • This paper was concerned with temperature aspect in the smoldering time of the accumulated each saw-dust sample of larch, oregon, aromatic trees which was formed with heaped cone-shape. The smoldering time and temperature of each sample was measured under the wind velocity of 0.10~0.15 m/s and circumstance relative humidity of 60%. As a result, the very lowest heat beginning temperature was detected in aromatic. The effective smoldering phenomena in the sample were detected when the larch saw-dust of [-20+40mesh] and the aromatic saw-dust of [-40+50mesh, -50+60mesh]. Finally the larger a particle size of saw-dust was the better a smoldering time was short. Also, it showed more increasing temperature above $70^{\circ}C$in the smoldering reaction.

  • PDF

화염으로부터의 복사 열유속의 계측 I (A study on the measurement of Radiative Heat flux form the flame(I) -Design and Calibration of a Heat flux meter-)

  • 정종수;인종수;김승수
    • 대한기계학회논문집
    • /
    • 제14권2호
    • /
    • pp.484-491
    • /
    • 1990
  • A heat-flux meter has been designed and manufactured to measure the heat flux from the flame. A calibration method of the heat-flux meter by a calibration furnace has also been proposed. The k-type (Chromel-Alumel) thermocouple material has been used as the material for the beat-flux meter. The electormotive force (e.m.f.) from the K-type thermocouple is shown to be linearly proportional to the heat flux absorbed. The characteristics of the heat-flux meter become better as the radius of heat absorbing disk becomes larger and its thickness thinner.

VSAT 데이터 통신을 위한 묵시적 예약 방식의 다중접속 기법 (Multiaccess Scheme with Implicit Reservation for VSAT Data commmunication)

  • 이창건;최양희;정선종;김종상
    • 전자공학회논문지A
    • /
    • 제31A권7호
    • /
    • pp.1-16
    • /
    • 1994
  • In this paper, we propose a new multiple access scheme for VSAT(Very Small Aperture Terminal) data communications. The proposed scheme has better performance in terms of delay throughput than Controlled Multiaccess Scheme which has excellent performance. The proposed scheme use the spare reservation method, adaptation method to offered load, and fixed bandwidth reservation method. In this paper, we analyze the performance using simple queueing model and present the simulation results. When network traffic is very low, the new scheme and the controlled multiaccess scheme have almost the same access delay characteristic. As the network load becomes higher, the new scheme's access delay gain becomes larger. Futhermore, even when the network traffic is very high it is possible to access satellite link within the delay similar to one round-trip delay. In addition to access delay performance enhancement, the new scheme has facility that supports fixed bandwidth reservation. So it shows more enhanced performance in the environment that stream traffic is dominant such as in VSAT communication environment.

  • PDF

한 쌍의 실린더를 가지는 점성구동 마이크로 펌프의 성능 해석 (Performance Analysis of the Viscous-driven Micropump with Tandem Rotating Cylinders)

  • 최형일;조성찬;맹주성
    • 대한기계학회논문집B
    • /
    • 제27권9호
    • /
    • pp.1256-1261
    • /
    • 2003
  • Since the viscous effect increases as the size of device decreases, viscous-driven micropump is a promising mechanism in microscale applications. In the present study, a dual-rotor type pump which contains two counter-rotating cylinders for improving performance characteristics is proposed. First, for flows in the single-rotor type pump, the present unstructured grid simulation method is validated by comparing its results to the previous results. Next, the performance of the dual-rotor type pump is evaluated by the parametric studies and is compared to that of the previous single-rotor type pump. The flow characteristics are qualitatively similar to those of single-rotor type pump. However, the performance of the micropump with tandem rotors is still better than that of previous pumping type, e.g. much larger flow rate, smaller driving region, higher efficiency, and wider operation range.