• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.955-963
• /
• 2008

There are lots of tunnel intervals in the KTX II stage construction line for the linearity of railway line passing mountain region. In order to use the rocks from tunnel excavations, railway subgrades are constructed with crushed rock-soil mixtures. In this study, plain strain test using large scale box was conducted in order to analyze the characteristics of deformation behavior of railway subgrades composed of crushed rock-soil mixtures. The effects of variation of degree of saturation, stress level of applied loadings, and number of loading cycles on the resilient and permanent deformation behavior were analyzed. The results show that degree of saturation have a great effect on the deformation behavior of crushed rock-soil mixtures. The axial strain ranges between $0.1{\sim}0.8%$ with variation of degree of saturation, in assumption that deviatoric stress applied on the subgrade by high-speed train load is 55kPa.

• Structural Engineering and Mechanics
• /
• v.70 no.3
• /
• pp.257-267
• /
• 2019

Expressions for the calculation of ductility index for concrete girders with different ratios of prestressed and classical reinforcement were proposed using load-displacement, load-strain and load-curvature relation. The results of previous experimental static tests of several large-scale concrete girders with different ratio of prestressed and classical reinforcement are briefly presented. Using the proposed expressions, various ductility index of tested girders were calculated and discussed. It was concluded that the ductility of girders decreases approximately linearly by increasing the degree of prestressing. The study presents an expression for the calculation of the average ductility index of classical and prestressed reinforced concrete girders, which are similar to the analysed experimental test girders.

• Steel and Composite Structures
• /
• v.33 no.2
• /
• pp.245-259
• /
• 2019

The present study aims to investigate the ultimate strength and geometric nonlinear behavior of composite plates containing initial imperfection subjected to combined end-shortening strain and lateral pressure loading by using a semi-analytical method. In this study, the first order shear deformation plate theory is considered with the assumption of large deflections. Regarding in-plane boundary conditions, two adjacent edges of the laminates are completely held while the two others can move straightly. The formulations are based on the concept of the principle of minimum potential energy and Newton-Raphson technique is employed to solve the nonlinear set of algebraic equations. In addition, Hashin failure criteria are selected to predict the failures. Further, two distinct models are assumed to reduce the mechanical properties of the failure location, complete ply degradation model, and ply region degradation model. Degrading the material properties is assumed to be instantaneous. Finally, laminates having a wide range of thicknesses and initial geometric imperfections with different intensities of pressure load are analyzed and discuss how the ultimate strength of the plates changes.

• Nuclear Engineering and Technology
• /
• v.53 no.1
• /
• pp.172-177
• /
• 2021

The microstructure and texture of three 316L foils of 25 ㎛ thickness, which were subjected to different manufacturing process, were systematically characterized using advance analytical techniques. Then, the electrochemical property of the 316L foils in simulated pressurized water reactor (PWR) solution was analyzed using potentiodynamic polarization. The results showed that final rolling strain and annealing temperature had evident effect on grain size, fraction of recrystallization, grain boundary type and texture distribution. It was suggested that large final rolling strain could transfer Brass texture to Copper texture; low annealing temperature could limit the formation of preferable orientations in the rolling process to reduce anisotropy. Potentiodynamic polarization test showed that all samples exhibited good corrosion performance in the simulated primary PWR solution.

• Advances in nano research
• /
• v.12 no.6
• /
• pp.617-627
• /
• 2022

In the current study, the nonlinear impact of the Von-Kármán theory on the vibrational response of nonhomogeneous structures of functionally graded (FG) nano-scale tubes is investigated according to the nonlocal theory of strain gradient theory as well as high-order Reddy beam theory. The inhomogeneous distributions of temperature-dependent material consist of ceramic and metal phases in the radial direction of the tube structure, in which the thermal stresses are applied due to the temperature change in the thickness of the pipe structure. The general motion equations are derived based on the Hamilton principle, and eventually, the acquired equations are solved and modeled by the Meshless approach as well as a computer simulation via intelligent mathematical methodology. The attained results are helpful to dissect the stability of the MEMS and NEMS.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.86-94
• /
• 1993

In heavy industries forces which are exceeding the range of available force standard machines have to be measured. Force measuring system using build-up procedure can be applied to measure large forces efficiently. In this study strain gage type force sensors are designed and fabricated, and the build-up force measuring system with 4.5 MN capacity using the developed force sensors is 0.03% or less over the range of 600 kN .approx. 1.5 MN and the force measuring system is less than 0.06% or less over the range of 500 kN .approx. 4.5 MN.

• Research in Plant Disease
• /
• v.30 no.1
• /
• pp.20-25
• /
• 2024

A fungus strain Stereostratum corticioides PKVL1, belonging to the family Pucciniaceae that causes rust in plants, was discovered on the sheath of the bamboo Pseudosasa japonica leading to the death of the infected bamboo in the following year. Microscopic observation of the yellow fungal mass revealed teliospores with an oval, one-septate (two-celled) structure. The average length and width of teliospores were 31.83±3.57 ㎛ and 20.74±1.72 ㎛, respectively. The large-subunit ribosomal RNA gene was amplified using the LR0R and LR7 primers, showing that the strain PKVL1 had a similarity of 99.34% to previously reported S. corticioides. In particular, the two Stereostratum strains form a separate cluster among the fungi in the family Pucciniaceae. This is the first report in the Republic of Korea of fungal rust occurring on the culm of bamboo rather than on the leaves.

• The Korean Journal of Mycology
• /
• v.52 no.2
• /
• pp.115-123
• /
• 2024

In 2022, a fungal isolate, designated KNUF-22-049, was obtained from a soil sample collected from a field in Sang-ju, Gyeongsangbuk-do, Korea. The strain exhibited cultural and morphological characteristics, including colony color and size and the shapes and sizes of conidiogenous cells and conidia, that were consistent with those of Apinisia keratinophila. A phylogenetic analysis using the sequences of the internal transcribed spacer regions and the large subunit of the nuclear ribosomal RNA gene confirmed that isolate KNUF-22-049 is most closely related to A. keratinophila CBS 947.73^T at a species level. Both the morphological observations and phylogenetic analysis indicated that KNUF-22-049 is indeed an A. keratinophila strain. This study represents the first documentation of Apinisia keratinophila in Korea.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.25 no.2
• /
• pp.217-226
• /
• 2011

The aim of this study is to identify central neural pathway of neurons following the projection to the large intestine and Hapgok(LI4) which is Won acupoint of the large intestine meridian of hand-yangmyeong. In this experiment, Bartha's strain of pseudorabies virus was used to trace central localization of neurons related with large intestine and acupoint(LI4) which has been known to be able to regulate intestinal function. The animals were divided into 3 groups: group 1, injected into the large intestine; group 2, injected into the acupoint(LI4); group 3, injected into the acupoint(LI4) after severing the radial, ulnar, median nerve. After four days survival of rats, PRV labeled neurons were identified in the spinal cord and brain by immunohistochemical method. First-order PRV labeled neurons following the projection to large intestine, acupoint(LI4) and acupoint(LI4) after cutting nerve were found in the cervical, thoracic, lumbar and sacral spinal cord. Commonly labeled neurons were labeled in the lumbosacral spinal cord and thoracic spinal cord. They were found in lamina V- X, intermediomedial nucleus and dorsal column area. The area of sensory neurons projecting was L5-S2 spinal ganglia and T12-L1 spinal ganglia, respectively. In the brainstem, the neurons were labeled most evidently and consistently in the nucleus tractus solitarius, area postrema, dorsal motor nucleus of vagus nerve, reticular nucleus, raphe nuclei(obscurus, magnus and pallidus), C3 adrenalin cells, parapyramidal area(lateral paragigantocellular nucleus), locus coeruleus, subcoeruleus nucleus, A5 cell group, periaqueductal gray matter. In the diencephalon, PRV labeled neurons were marked mostly in the arcuate nucleus and median eminence. These results suggest that overlapped CNS locations are related with autonomic nuclei which regulate the functions of large intestine-related organs and it was revealed by tracing PRV labeled neurons projecting large intestine and related acupoint(LI4).

• Journal of Sensor Science and Technology
• /
• v.9 no.1
• /
• pp.22-27
• /
• 2000

Amorphous FeCoSiB films with high saturation magnetostriction and excellent soft magnetic properties have been studied to evaluate their strain sensitivity. Films were subjected to a strain by bending of their substrates, which caused a change in the magnetic anisotropy of films via magnetoelastic coupling. Films were exhibited a figure of merit $F=({\Delta}{\mu}/{\mu})/{\varepsilon}$ (change in film permeability $\mu$ per unit strain $\varepsilon$) of $1.2{\times}10^5$, which is comparable with that of amorphous ribbons. To make a study of application of magnetostrictive films as strain sensor elements, we have prepared a micro-patterned film by means of the photolithography and ion milling processes. Impedance change in the patterned films, when strain was applied, was measured over the frequency range from 1 MHz to 1 GHz. Reflecting a large value of figure of merit F, a variation of 46% impedance of films was shown at 100 MHz frequency when a strain of $300{\times}10^{-6}$ was applied.