• 대한기계학회논문집B
• /
• 제26권12호
• /
• pp.1674-1680
• /
• 2002

An experimental study was made of a large-scale vortical structure over a backward-facing step. The Reynolds number based on the step height was R $e_{H}$ =33,000. To recognize the large-scale vortex, three components of velocity were measured. The measurements were performed in the recirculation zone (x/H=4.0) and the reattachment zone(x/H=7.5). To measure the wall pressure fluctuations in a turbulent flow over a backward-facing step, a 32-channel microphone array was installed beneath the wall in the streamwise and spanwise directions. From the measured pressure field, the size of large-scale vortex was obtained. As a detailed study, a conditionally-averaging technique was employed to characterize the coherent structure of the large-scale vortex. To see the relationship between the flow field and the relevant spatial mode of the pressure field, the spatial box filtering (SBF) was examined. A cross-correlation between velocity and pressure fluctuations was performed to identify the structure and the length scale of the large-scale vortex.x.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 2부
• /
• pp.375-380
• /
• 2007

맥락 정보와 맥락 인식 시스템에 대한 연구는 지난 10 여 년 동안 유비쿼터스 컴퓨팅 분야에서 중요한 이슈로 다루어졌다. 대부분의 맥락 인식 시스템은 위치 정보와 같이 단일 형태의 맥락 정보를 위해서 설계되었거나 연구실 수준의 크기로 제한되었다. 그러나 많은 종류의 센서와 actuator 를 포함하고 다수의 관리 도메인으로 확장 가능한 스케일이 큰 시스템에 대한 개발 및 평가는 여전히 미흡한 수준이다. 특히, 맥락 퓨전과 추론 구조를 가지는 Large-scale 의 맥락 인식 시스템에 대한 평가 방법이 필요한 실정이다. 본 논문에서는 휴리스틱 평가를 이용한 Large-scale 맥락 인식 시스템의 평가 방법에 대하여 제안한다. 그리고 우리는 동적인 맥락 인식 시스템을 지원하고 맥락 퓨전 및 추론을 위한 메커니즘을 포함하는 기본 구조에 대해서 자세히 설명한다. 맥락 인식 시스템 평가를 위해서 제안된 접근법은 사용자 인터페이스 도메인에서 잘 알려진 전문가에 의한 평가 방법으로 Large-scale 맥락 인식 시스템에 적합하도록 특별히 선택된 heuristics 집합을 이용하는 휴리스틱 평가(Heuristic Evaluation)이다.

• 대한기계학회논문집B
• /
• 제25권8호
• /
• pp.1060-1067
• /
• 2001

A large-scale bursting event has been analyzed in a turbulent channel flow using a data obtained from a direct numerical simulation (DNS). Large-scale, plume-like structures have been frequently observed in many experimental results, but the origin of those structures is far from being fully understood. It is believed that those large scale events occur occasionally but contribute significantly to the generation of Reynolds shear stress in the outer layer. This paper attempts to give detailed examples of those large-scale motions observed in a turbulent channel flow at relatively low Reynolds number.

• 한국컴퓨터정보학회논문지
• /
• 제13권2호
• /
• pp.105-111
• /
• 2008

자료를 시각적으로 표현하는 방법은 입력자료나 출력자료의 형태에 따라 많은 방법들이 제시되었다. 복잡하거나 방대한 자료 또는 정보를 시각적으로 표현하기 위해서 LOD와 같은 방법을 사용하고 특정부분을 지정하여 확대하는 방법을 주로 사용하고 있다. 본 논문에서는 생물정보와 같은 대용량 자료의 동적이고 실시간으로 배율을 표현할 수 있는 레벨수준 표현을 위한 인터페이스 설계 방법을 제안한다. 이는 기존의 LOD나 특정지역의 단순한 확대만을 위한 것이 아니라 동적으로 특정 영역을 축소 또는 확대해야 할 경우 실시간으로 표현할 수 있는 방법이다. 축소 또는 확대영역의 폭을 크게 했다가 어느 시점에서 매우 정교하게 조절할 수 있다. 제안된 방법으로 방대한 유전체 자료를 표현하는데 접목하여 구현하였고 매우 편리함을 보여주었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제21권3호
• /
• pp.32-37
• /
• 2019

In various types of large-scale electrical applications, the number of coil turns in such machines is usually large. Electromagnetic simulation of large-scale superconducting coils (tens to hundreds of turns) is indispensable in the design process of superconducting electrical equipment. However, due to the large scale of the coil and the large aspect ratio of super-conducting material layer in HTS coated conductor, it is usually difficult or even unable to perform 3-D transient electromagnetic simulation. This paper introduces an effective 3-D electromagnetic simulation method for large-scale HTS coated conductor coil based on T-A formulation. The simulation and experimental results show that the 3-D model based on the T-A formulation using homogeneous strategy is more accurate than the traditional 2-D models. The memory usage is not sensitive to the number of turns and this model will be even more superior as the number of turns becomes larger.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.636-645
• /
• 1990

본 연구에서는 전보에서 수행한 이론해석의 결과를 실험결과에 적용하여 세라 믹의 마멸형태를 파괴역학적 견지에서 고찰하고, 새로운 세라믹의 마멸이론과 마멸평 가를 위한 파라메타를 제안하고자 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2008년도 춘계 학술논문 발표대회
• /
• pp.159-163
• /
• 2008

The trend of Development Projects has been changing through a few recent years. Small-scale development projects in the past were usually for building residences or officetel in a big cities. making lots of profits. These projects made not only lots of profits but also unbalance between the urban centers and the suburbs. So government made some regulations to prevent the things from being worse anymore, planned to develop the country in balance and began to lead large-scale development project such as Inno city and Newtown. At first, in this study, the phases and the characteristics of development project's change will be looked around. And then, after overview about PFV(project financing vehicle) used a lot in large-scale development projects will be seen, the better ways to use PFV in large-scale development projects are going to be proposed by considering the problems in PFV's conformation.

• 센서학회지
• /
• 제26권1호
• /
• pp.1-6
• /
• 2017

The advanced driver assistant system (ADAS) requires the collection of a large amount of information including road conditions, environment, vehicle status, condition of the driver, and other useful data. In this regard, large-scale sensor networks can be an appropriate solution since they have been designed for this purpose. Recent advances in sensor network technology have enabled the management and monitoring of large-scale tasks such as the monitoring of road surface temperature on a highway. In this paper, we consider the estimation and fusion problems of the large-scale sensor networks used in the ADAS. Hierarchical fusion architecture is proposed for an arbitrary topology of the large-scale sensor network. A robust cluster estimator is proposed to achieve robustness of the network against outliers or failure of sensors. Lastly, a robust hierarchical data fusion scheme is proposed for the communication channel between the clusters and fusion center, considering the non-Gaussian channel noise, which is typical in communication systems.

• 한국CDE학회논문집
• /
• 제19권3호
• /
• pp.294-304
• /
• 2014

This paper presents a real-time rendering algorithm of large-scale geometric data using GLSL (OpenGL shading language). It details the VAO (vertex array object) and VBO(vertex buffer object) to be used for up-loading the large-scale point clouds and polygon meshes to a graphic video memory, and describes the shader program composed by a vertex shader and a fragment shader, which manipulates those large-scale data to be rendered by GPU. In addition, we explain the global rendering procedure that creates and runs the shader program with the VAO and VBO. Finally, a rendering performance will be measured with application examples, from which it will be demonstrated that the proposed algorithm enables a real-time rendering of large amount of geometric data, almost impossible to carry out by previous techniques.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제1권1호
• /
• pp.45-50
• /
• 1997

Understanding the nonlinear flow caused by orographic effects can be valuable in siting of new businesses, industries, and transportation facilities. In spite of recent work on large-amplitude waves and wave breaking, the studies of flow around large scale mountains have just begun. The generative mechanism of lee vortices in the lee of large scale mountain is investigated by Ertel's theorem. The CSU RAMS is used as a numerical model. According to the numerical results, the isentropes are depressed behind the large scale mountains. This means the vortex lines must run upward and downward along the depression surface because vortex lines adhere to isentropic surfaces. Therefore, the vertically oriented vorticity can be formed in the lee of the large scale mountain. This vorticity plays an important role for orographic precipitation, because strong vertical velocity and cloud bands are developed along isothermal deformation surface.