• 한국해양환경ㆍ에너지학회지
• /
• 제1권2호
• /
• pp.18-26
• /
• 1998

본 논문은 쇄파와 속도 전단에 의해 발생하는 난류에 의해 해상에 유출된 기름이 유적으로 분해되어 해수면 하로 분산되어 가는 과정을 논하였다. 유막 분산의 역학적 메커니즘을 파악하기 위하여 두 가지 수리실험, 즉 전단발생장치와 조파수조를 이용하여 난류를 발생시켰다. 이러한 실험으로부터 혼합시간이 증가함에 따라 수면에 형성된 유막은 수십 마이크로미터에서 수백 마이크로미터의 입경을 가진 유적으로 분산되었다 뿐만 아니라 유출된 기름의 풍화정도에 따라서 상이한 분산 메커니즘을 나타내는 것을 확인할 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 A
• /
• pp.310-312
• /
• 2005

An out-of-step condition results from the loss of the synchronism of the generators. A disturbance in a power system causes the generator angle to oscillate. When there is a severe disturbance such as a heavy current fault loss of major generation or loss of a large block of load the oscillation can be severe and even increase largely and finally the out-of-step condition may occur During the power swing and out-of-step conditions, the a apparent impedance at a relay location changes, and the power flow also changes as the angle difference is varied. This paper presents a method to analyze the trajectory of complex power during a power swing and out-of-step condition. The trajectory of the complex power is analyzed when a power swings and a fault occurs. Moreover, the complex power is analyzed when the ratios between the voltages at both sides and the line impedances are changed. These methods are verified through simulation using the ATP/EMTP MODELS.

• International Journal of Fluid Machinery and Systems
• /
• 제2권3호
• /
• pp.197-205
• /
• 2009

Since large-scale commercial wind turbine generator systems such as MW-class wind turbines are becoming widely operated, the vibration and distortion of the blade are becoming larger and larger. Therefore the soft structure design instead of the solid-design is one of the important concepts to reduce the structural load and the cost of the wind turbine rotors. The objectives of the study are development of the fluid-structure coupled analysis code and evaluation of soft rotor-blade design to reduce the unsteady structural blade load. In this paper, fluid-structure coupled analysis for the HAWT rotor blade is performed by free wake panel method coupled with hinge-spring blade model for the flapwise blade motion. In the model, the continuous deflection of the rotor blade is represented by flapping angle of the hinge with one degree of freedom. The calculation results are evaluated by comparison with the database of the NREL unsteady aerodynamic experiment. In the analysis the unsteady flapwise moments in yawed inflow conditions are compared for the blades with different flapwise eigen frequencies.

• 한국전기전자재료학회논문지
• /
• 제20권10호
• /
• pp.895-900
• /
• 2007

Partial discharge(PD) test can be performed either when the rotating machine is not operating(off-line) or during normal machine operation(on-line). This paper presents an on-line and off-line PD test on a large hydro-generator and induction motor using the same PD acquisition system(PDAS) and ceramic coupler(CC) sensor. PD signal characteristics of CC sensor proved similar with that of epoxy mica coupler(EMC) sensor as a results of PD test for simulated defect winding and frequency response test. A comparison of on-line and off-line PD test for PD characteristic parameters-phase resolved PD(PRPD), maximum PD value(Qmax) and PD occurrence energy(POE)-indicated that on-line PD test could reliably and effectively diagnose insulation conditions which were verified by off-line PD test.

• 전자공학회논문지C
• /
• 제34C권9호
• /
• pp.53-60
• /
• 1997

In this paper, an efficient BILBO(named EBILBO) is proposed for batch testing application when a BIST (built-in self test) circuit is implemented on ASIC. In a large and complex circuit, the proposed algorithm of batch testing has one pin-count that can easily control 4 test modes in the normal speed of circuit operation. For the implementation of the BIST cifcuit, the test patern needed is generated by PRTPG(pseudo-random test pattern generator) and the ouput is observed by proposed algorithm is easily modified, such as the modelling of test pattern genration, signature EBILBO area and performance of the implemented BIST are evaluated using ISCAS89 benchmark circuits. As a resutl, in a circuit above 600 gates, it is confirmed that test patterns are genrated flexibly about 500K as EBILBO area is 59%, and the range of fault coverage is from 88.3% to 100%. And the optimized operation frequency of EBILBO designed and the area are 50MHz and 150K respectively. On the BIST circit of the proposed batch testing, the test mode of EBILBO is able to execute as realtime that has te number of s$\^$+/n$\^$+/(2s/2p-1) clocks simultaneously with the normal mode of circuit operation. Also the proposed algorithm is made of the library with VHDL coding thus, it will be widely applied to DFT (design for testability) that satisfies the design and test field.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.935-941
• /
• 2012

This paper describes a study of conventional electrical rig and simulated application of Flywheel Energy Storage system on the power system of the offshore plants with dynamic positioning system with the following aims: improve fuel consumption on engines, prevent blackout and mitigate voltage sags due to pulsed load and fault. Fuel consumption has been analyzed for the generators of the typical drilling rigs compared with the power plant with Flywheel Storage Unit which has an important aid in avoiding power interruption during DP (Dynamic Positioning) operation. The FES (Fly wheel Energy storage System) releases energy very quickly and efficiently to ensure continuity of the power supply to essential consumers such as auxiliary machinery and thrusters upon main power failure. It will run until the standby diesel generator can start and supply the electric power to the facilities to keep the vessel in correct position under DP operation. The proposed backup method to utilize the quick and large energy storage Flywheel system can be optimized in any power system design on offshore plant.

• 디지털콘텐츠학회 논문지
• /
• 제10권4호
• /
• pp.485-492
• /
• 2009

최근 모바일 기기는 거의 모든 사람들에 의해 사용되고 있는데, 이는 모바일 단말기가 휴대하기에 편리하고 아울러 모바일 네트워크의 성능이 향상되었기 때문이다. 이에 따라 휴대폰 상에서 실행 가능한 응용의 종류가 다양해지면서 대용량 소프트웨어 실행에 대한 필요성이 대두되었고, 이를 위해 Mobile-JPVM 같은 휴대폰 클러스터 컴퓨팅 라이브러리도 등장하였다. 본 논문에서는 Mobile-JPVM을 이용하여 실시간 Animated GIF 파일 생성기와 휴대폰용 Animated GIF 뷰어를 구현하였다. 아울러, 개발된 소프트웨어를 KTF 휴대폰에 탑재하여 에뮬레이터가 아닌 실제 환경에서 실행될 수 있음도 보였다. 개발된 실시간 Animated GIF 생성기와 휴대폰용 뷰어는 모바일 패션 데이터 광고 서비스에 활용될 수 있다.

• 디지털콘텐츠학회 논문지
• /
• 제10권4호
• /
• pp.625-632
• /
• 2009

본 논문은 실시간 파노라마를 위한 영상의 특징점 검출 방법을 제안한다. 파노라마 연구는 최근 실시간 지역탐색이나 DVR 등에 적용하는 연구가 최근 활발히 진행되고 있다. 특히 특징 점 검출은 파노라마를 이루는 가장 중요한 요소이다. 특징 점 검출을 위해서는 어떠한 명암 변화에도 특징점은 불변이어야 하며 이미지의 크기와 회전이 변화하더라도 불변의 점을 찾아야 한다. 기존 연구방법은 고차원적인 벡터와 많은 후보 점을 선점하기 때문에 연산량이 많고 수행시간이 길어 실시간에 활용하기에는 어려운 점이 있다. 따라서 본 논문은 보다 빠른 실시간 특징 점 검출을 위해 LoG 방법을 비트단위로 분할 후 결합하는 BLoG 방법을 제안하고 다양한 실험을 통하여 속도와 연산량 그리고 검출 성능에 대하여 비교한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1172-1173
• /
• 2008

At the moment, the control ability of wind farms is a prime research concern for the grid integration of large wind farms, due to their required active role in the power system. As more wind turbines are installed, the power from wind energy will start to replace conventional generation units and its influence on power systems cannot be neglected. Besides, because of the intermittent nature of wind the output power of wind turbines fluctuates according to wind speed variation. Especially an isolated power system with small capacity such like Jeju needs more systematic solutions and regulations(grid code). This paper presents the idea of approach for centralized operating wind farm strategy to regulate the wind farm power production to the reference power ordered by the system operator. The doubly fed induction generator(DFIG) can control active and reactive power in feasible range. So wind farm comprised of DFIG has the possibility of a controllable component in the power system. The presented wind farm control has a hierarchical structure with both a wind farm control level and a wind turbine control level.

• 전기학회논문지P
• /
• 제66권1호
• /
• pp.21-26
• /
• 2017

Failure of high-voltage transmission line, which is responsible for large-scale power transmission, can be reason for system voltage instability. There are many methods to prevent voltage instability like adjustment of equipment, the generator voltage setting, and load shedding. Among them, the load shedding, have a problem of economic loss and cascading effect to power system. Therefore, the execution of load shedding, amount and timing is very important. Conventionally, the load shedding setting is decided by the preformed simulation. Now, it is possible to monitor the power system in real time by the appearance of PMU(Phasor Measurement Unit). By this reason, some of research is performed about decentralized load shedding. The characteristics of the load can impact to amount and timing of decentralized load shedding. Especially, it is necessary to consider the influence of the induction motor loads. This paper review recent topic about under voltage load shedding and compare with decentralized load shedding scheme with conventional load shedding scheme. And simulations show the effectiveness of proposed method in resolving the delayed voltage recovery in the Korean Power System.