• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.255-256
• /
• 2007

A A4 size black and white reflective plastic display was developed for out door application. For document readability, high resolution of 180ppi plastic TFT backplane and high reflectance electrophoretic front panel sheet was used. Preparation of display was held near $100^{\circ}C$ process on PEN substrate.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.1 s.18
• /
• pp.59-64
• /
• 2007

Non-contact transportation of a large-sized glass plate using air cushion for the vertical sputtering system of liquid crystal display (LCD) panel was considered. The objective of the study was to design an air pad unit which was composed of multiple injection and exhaust holes and mass flow supplying pipe. The gas was injected through multiple small holes to maintain the force for levitating glass plate. After hitting the plate, the air was vented through exhaust holes. Complex flow field and resulting pressure distribution on the glass surface were numerically studied to design the air injection pad. The exhaust hole size was varied to obtain evenly distributed pressure distribution at fixed diameter of the injection hole. Considering the force for levitating glass plate, the diameter of the exhaust hole of 30 to 40 times of the gas injection hole was recommended.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.923-926
• /
• 2009

We fabricated large-area OLED lighting device using screen printing. In order to operate full area of large-area OLED uniformly, each cell in OLED panel was designed to work separately. We connected OLED panel with a PCB electrically using jig pins so that each cell could be operated individually. In this presentation, we report a few important issues on the fabrication of large-area OLED for lighting applications.

• Journal of Power Electronics
• /
• v.5 no.1
• /
• pp.67-75
• /
• 2005

A high efficiency ZVS PWM asymmetrical half bridge converter for a plasma display panel (PDP) sustaining power modules is proposed in this paper. To achieve the ZVS of power switches for the wide load range, a small additional inductor L/sub 1kg/, which also acts as an output filter inductor, is serially inserted into the transformer's primary side. At that point, to solve the problem of ringing in the secondary rectifier caused by L/sub 1kg/, the proposed circuit employs a structure without the output filter inductor, which helps the voltages across rectifier diodes to be clamped at the output voltage. Therefore, no dissipative RC (resistor capacitor) snubber for rectifier diodes is needed and a high efficiency as well as low noise output voltage can be realized. In addition, since it has no large output inductor filter, the asymmetrical half bridge converter features a simpler structure, lower cost, less mass, and lighter weight. In addition, since all energy stored in L/sub 1kg/ is transferred to the output side, the circulating energy problem can be effectively solved. The operational principle, theoretical analysis, and design considerations are presented. To confirm the operation, validity, and features of the proposed circuit, experimental results from a 425W, 385Vdc/170Vdc prototype are presented.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1995.11a
• /
• pp.302-305
• /
• 1995

ITO(indium tin oxide) that is both conductive in electricity and transparent to the visible ray is called transparent conducting thin film. Nowaday, according to the development of flat panel display such as LCD(Liquid Crystal display, EL(electolumine- scence display), PDP(plasma display panel), ECD(electrocromic display), the higher quality in the low temperature process has been asked to reduce the production cost and to have a good uniformity on a large substrate. In this study, we prepared indium tin oxide(ITO) by a cylindrical DC magnetron sputtering with Indium-tin (9:1) alloy target instead of indium-tin oxide target. To reduce the defact in ITO, the effect on ITO by varing the magnetic field intensity and the applied voltage ares studied. the resistivity of the film deposited in oxygen partial pressure of 5% and substrate temperature of 140$^{\circ}C$. is 1.6${\times}$10$\^$-1/$\Omega$$.$cm with 85% optical transmission in viaible ray.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.85-86
• /
• 2007

As the manufacturing capacity needs for large size LCD TV shifts very fast into next generation, equipment manufactures face more challenges in development of the systems which can accommodate productivity, reliability and high process quality requirements from the panel makers. AKT committed to continue its contribution to the growth of the LCD market by providing excellent PECVD products. The cost containment and performance improvement are key challenges for large size processing equipment development and this presentation discusses various challenges and AKT's solutions in developing large size PECVD equipment beyond Gen. 8.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.9 no.4
• /
• pp.878-885
• /
• 2008

The FPDs(Flat Panel Displays) such as LCD(Liquid Crystal Display) and PDP(Plasma Display Panel) and OLED(Organic Light Emitting Diode), recently, have been substituted for CRT(Cathode Ray Tube) displays because they have a convex surface, small volume, light weight and lower electric power consumption. The productivity of FPDs is greatly dependent on the area of thin glass panel with 0.6 - 0.8mm thickness because FPDs are manufactured by cutting a large-scaled thin glass panel with patterns to the required product dimensions. So FPD's industries are trying to increase the area of thin glass panel. For example, the thin glass panel size of the 8th generation is 2,200mm in width, 2,600mm in length and 0.7mm in thickness. The air flows both in the thin glass panel and in the porous PE-plate surface were modeled and analyzed, from which a working condition was estimated. The thin glass panel on the porous PE-plate surface with self-lubricating characteristics was investigated and compared with that on the square duct floating bar surface with many holes of 1mm diameter when the thin glass panel contacts the floating bar surface due to malfunction of electric power supply.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1067-1070
• /
• 2005

A large size flat panel LCD-TV must fulfill different requirements than a desktop LCD-monitor: The contrast must be much larger, the viewing angle should be as wide as possible and the switching times must be shorter to allow moving pictures to be displayed naturally. The "Vertically Aligned" technology is most promising to realize such a product. LC-material development for this technology began at Merck about 10 years ago. New materials based on the 1,1,6,7-tetrafluoroindane skeleton were recently synthesized via ortho-metallation and intramolecular Heck cyclization followed by an oxidative fluorination procedure. The materials offer improved properties over liquid crystals currently employed in flat panel LCD-TVs.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.368-369
• /
• 2003

The recent development of InGaN-based white light emitting diodes (LEDs) has expanded their potential applications in areas such as white electric home appliances, backlight for mobile phone or notebook PC, and indoor lightings. In this lecture, recent researches related to the phosphors for LEDs applications and their luminescent properties were reviewed. PDPs are considered as the most potential flat panel displays with a large-screen size. Phosphors in PDPs directly affect the brightness and lifetime. So, many researchers have tried to improve the luminescence characteristics of the phosphors especially under vacuum ultraviolet (VUV) excitation. We overviewed recent research trends and conclusive achievements for the PDP phosphors.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2005.05a
• /
• pp.1289-1290
• /
• 2005