• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.854-859
• /
• 2006

The density of coarse grained materials which is used in rock-fill dam or the piling the ground are used as $1.85\sim2.10g/cm^3$. Hereupon, the effect of variation of density on shear strength of ones was analyzed from the results of large scale shear test. The sample for the test was obtained from the local quarry sites. The test conditions are that density(1.85 versus $2.10g/cm^3$), material size range$(76.3\sim2.0\;mm)$, water content(air dry condition) and uniformity coefficient(5.0) Test result shows that the shear strength of $2.10g/cm^3$ is relatively larger than that of $1.85g/cm^3$.

• 한국지반신소재학회논문집
• /
• 제5권3호
• /
• pp.25-30
• /
• 2006

흙 자체의 전단강도와 흙과 직포사이의 접촉면 전단강도를 산정하기 위해서 본 연구에서는 대형직접전단시험기를 사용하였다. 두 종류의 흙(모래와 점토)과 한 종류의 직포를 실험에서 사용하였다. 본 연구에서는 총 9번의 시험을 수행하였다. 그 결과, 모래 자체는 $30^{\circ}$의 내부마찰각을 나타내었다. 직포와 모래의 접촉면 마찰각은 $26^{\circ}$로 87%의 효율을 나타내었다. 이와 비슷하게 직포와 점토의 접촉면 마찰각은 $7.7^{\circ}$를 나타내었다.

• Geomechanics and Engineering
• /
• 제29권3호
• /
• pp.281-290
• /
• 2022

The direct shear test is commonly used to evaluate the shear behavior of frozen soil-structure interfaces under normal stress. However, failure criteria, such as the Mohr-Coulomb failure criterion, are needed to obtain the unconfined shear strength. Hence, the punch shear test, which is usually used to estimate the shear strength of rocks without confinement, was examined in this study to directly determine the adfreezing strength. It is measured as the shear strength of the frozen soil-structure interface under unconfined conditions. Different soils of silica sand, field sand, and field clay were prepared inside the steel and concrete ring structures. Soil and ring structures were frozen at the target temperature for more than 24 h. A punch shear test was then conducted. The test results show that the adfreezing strength increased with a decrease in the target temperature and increase in the initial water content, owing to the increase in ice content. The adfreezing strength of field clay was the smallest when compared with the other soil specimens because of the large amount of unfrozen water content. The field sand with the larger normalized roughness showed greater adfreezing strength than the silica sand with a lower normalized roughness. From the experiment and analysis, the applicability of the punch shear test was examined to measure the adfreezing strength of the frozen soil-structure interface. To find a proper sample dimension, supplementary experiments or numerical analysis will be needed in further research.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.314-323
• /
• 2010

Recently, granular soils having a large particle size are frequently used as a filling material in the construction of foundation, harbor, dam, and so on. The shear behavior of this granular soil plays a key role in the stability of structures. For example, soil particle crushing occurring at the interface between structure and soil and/or within soil mass can cause the disturbance of ground characteristics and consequently induce an issues in respect of stability of structures. In order to investigate the shear behavior according to an existence and nonexistence of particle crushing, numerical analyses were conducted by using the DEM(Discrete Element Method)-based software program PFC(Particle Flow Code). Using the crushing model and non-crushing model which were created in this study, numerical analyses of ring shear test were conducted and their results were analyzed and compared. In general, landslide and slope stability are accompanied by a large displacement and consequently not only a peak strength but also a residual strength are very important in the analysis of landslide and slope stability. However the direct shear test which has been commonly used in the determination of shear strength parameters has a limitation on displacement therefore the residual strength parameters can not be obtained. The characteristics of residual shear behavior were investigated through the numerical analyses in this study.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.548-555
• /
• 2000

It was investigated whether the waste polyethylene chips can be recycled as construction materials in geotechnical engineering field. The standard Proctor test, the hydraulic conductivity test, the large box direct shear test, the thermal conductivity test, the frost heaving test and the time domain reflectometry test were performed on weathered granite soil mixed with variable amount of the waste polyethylene chips. The experimental results showed that the hydraulic conductivity and the shear strength of weathered granite soil increase with increasing the amount of the waste polyethylene chips. On the other hand, the thermal conductivity, the amount of frost heaving and the unfrozen water contents of weathered granite soil decrease with increasing the amount of the waste polyethylene chips.

• 한국지반공학회논문집
• /
• 제23권10호
• /
• pp.65-72
• /
• 2007

본 연구에서는 효율의 관점에서 흙 자체의 전단강도 및 흙/토목섬유 상호간의 접촉면 마찰특성을 조사하기 위하여 대형직접전단시험을 수행하였다. 모래와 쇄석, 3종류의 지오텍스타일(즉, 2종류의 부직포와 1종류의 직포)을 시험에 사용하였다. 접촉면에서의 전단강도를 산정하는데 고려한 접촉면은 모래/모래, 쇄석/쇄석, 모래/직포, 쇄석/직포, 쇄석/부직포-A 그리고 쇄석/부직포-B 등이다. 연구결과, 모래/직포의 접촉면에서는 모래자체의 전단강도(즉, 모래/모래 접촉면)와 비교하여 84%의 효율을 얻었다. 쇄석/부직포-A, 쇄석/부직포-B, 쇄석/직포의 접촉면에서는 쇄석자체의 전단강도(즉, 쇄석/쇄석 접촉면)와 비교하여 각각 74%, 83%, 72%의 효율을 얻었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.577-583
• /
• 2010

In this study, the effect of void formation resulting from gas hydrate dissociation or loss of some particles within soil structure on the strength of soil is examined. Beag-ma river sands with uniform gradation were used to simulate a gas hydrate bearing or washable soil structure. Empty capsules for medicine are used to mimic large voids, which are bigger than soil particle. Beag-ma river sand was miced with 8% cement ratio and 14% water content and compacted into a shear box. The number and direction embedded into a specimen. After 4 hours curing, a series of direct shear test is performed on the capsule embedded cemented sands. Shear strength of cemented sands with capsules depends on the volume and direction. The volume and direction formed by voids are most important factors in strength. A shear strength of a specimen with large voids decreases up to 39% of a specimen without void. The results of this study can be used to predict the strength degradation of gas hydrate bearing sediments after dissociation and loss of fine particles within soil structure.

• 한국지반환경공학회 논문집
• /
• 제11권7호
• /
• pp.57-63
• /
• 2010

국토의 70%를 산이 차지하고 있는 우리나라의 여건으로 볼 때 효율적이고 경제적인 연약지반 개량의 필요성이 점차 높아지고 있다. 해양개발을 위한 연약지반개량 공법에는 모래다짐말뚝공법, 치환공법, 프리로딩공법, 대기압공법, 지하수위 저하공법, 팩드레인공법, 생석회말뚝공법 등이 있는 데, 그 중 모래다짐말뚝공법은 모래의 수급이 어려워져 수입하는 등의 경제적인 문제점과 모래채취로 인한 자연 훼손의 문제점을 야기하므로 이에 대한 대책공법이 시급한 실정이다. 최근, 모래와 공학적 성질이 유사한 화력발전소 부산물인 저회를 대체 재료로 활용하기 위한 연구가 이루어지고 있으나 연약지반 개량 재료로 활용하기 위한 연구는 미미한 실정이다. 따라서, 본 연구에서는 10~80%의 치환율로 복합지반을 조성하여 대형직접전단시험, 전단시험, 표준압밀시험을 실시한 후 저회다짐말뚝의 전단특성과 압밀특성을 규명하였다. 연구결과 저회다짐말뚝의 치환율이 증가에 따라 전단강도 정수는 증대하고, 침하저감 계수 및 $t_{90}$은 감소하는 경향이 나타났다.

• 한국지반공학회논문집
• /
• 제38권2호
• /
• pp.29-38
• /
• 2022

마찰 방향에 따른 전단 저항의 이방성을 지반 구조물에서 선택적으로 이용할 수가 있다. 예를 들어서, 축방향으로 하중을 가하는 깊은 기초, 소일 네일링, 타이백 등은 큰 전단 저항이 유발되므로 하중 전달 능력을 증가시키지만, 이와 반대로 말뚝 관입과 흙 시료 채취 등은 최소화된 전단 저항만 유발된다. 기존 연구는 뱀 비늘의 기하학적 형상과 유사한 표면 돌출부를 갖는 플레이트와 흙 경계면에서 유발되는 전단 저항 변화를 확인하였다. 본 논문에서는 표면 돌출부의 형상에 따른 경계면 마찰각의 변화를 정량적으로 평가하였다. 수정된 직접 전단 시험기를 이용하여 상대 밀도가 40%로 조성된 모래 시료에 대해 9개의 플레이트, 2개의 전단 방향(전단 시 돌출부 높이가 증가와 감소하는 방향), 그리고 3개의 초기 수직 응력(100kPa, 200kPa, 300kPa) 조건으로 총 51가지 경우를 실험 하였다. 실험 결과, 전단 응력은 돌출부 높이가 높을수록, 돌출부 길이가 짧을수록, 돌출부 높이가 증가하는 전단 방향에서 크게 나타났다.

• Geomechanics and Engineering
• /
• 제20권4호
• /
• pp.299-312
• /
• 2020

The aim of this paper was to investigating the effects of soil relative density, construction materials roughness, oil type (gasoil, crude oil, and used motor oil), and oil content on the internal and interface shear behavior of sand with different construction materials by means of a modified large direct shear test apparatus. Tests conducted on the soil-soil (S-S), soil-rough concrete (S-RC), soil-smooth concrete (S-SC), and soil-steel (S-ST) interfaces and results showed that the shear strength of S-S interface is always higher than the soil-material interfaces. Internal and interface friction angles of sand beds increased by increase in relative density and decreased by increasing oil content. The oil properties (especially viscosity) played a major role in interface friction behavior. Despite the friction angles of contaminated sands with viscous fluids drastically decreased, it compensated by the apparent cohesion and adhesion developed between the soil grains and construction materials.