• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.549-554
• /
• 2013

For the past years, higher power rating 2 stroke super long stroke diesel engines having more than 8 cylinders and larger cylinder bore are installed mainly on very large containerships to save on fuel consumption. However, these engines are prone to X-mode vibration due to $2^{nd}$ node torsional vibration or the X-type moment, particularly because of the increase in total length and height. Recently, cases of excessive X-mode vibration often occurred on engine's major components. This vibration is manifested also as secondary vibration causing failure in engine-mount large structures. This study investigated the excitations caused by the $2^{nd}$ node propulsion shafting torsional vibration that influence X-mode vibration of the main engine and practical countermeasures are proposed. An 8RT-82RT-flex 8 cylinder engine and 11S90S-ME 11 cylinder engine for a container ship was used as research model.

• Journal of Chest Surgery
• /
• v.40 no.4 s.273
• /
• pp.292-296
• /
• 2007

Background: This retrospective study was undertaken to assess the effectiveness of the 8-French (Fr) catheter ($Pleuracan^{(R)}$) for the initial treatment of primary spontaneous pneumothorax. Material and Method: Between July 2004 and July 2006, 59 patients (72 cases) underwent a closed thoracostomy for primary spontaneous pneumothorax. We divided these patients into two groups: group T (large bore (>20 Fr) chest tube group) and group P ($Pleuracan^{(R)}$ group). Result: Initially, the $Pleuracan^{(R)}$ catheters were inserted in 41 cases. There were four catheter malfunctions (9.8%) : three cases had a subsequent closed thoracostomy with a large bore chest tube. Ultimately, there were 34 cases in group T and 38 cases in group P. There were no significant differences in indwelling catheter time ($T:\;2.1{\pm}1.5\;days,\;P:\;2.1{\pm}1.3\;days$), hospital stay ($T:\;6.4{\pm}5.4\;days,\;P:\;5.2{\pm}2.9\;days$) and complications (T: 3%, P: 0%) between the two groups. The percentage of cases that needed intravenous analgesics in group P was 60% (23/38); this was significantly lower than the number for group T (90%, 31/34) (p=0.003). In a subgroup of patients that did not undergo bullectomy(T: 17 cases, P: 19 cases), there were no significant differences in the duration of air leakage ($T:\;0.5{\pm}0.7\;days,\;P:\;0.5{\pm}1.2\;days$) and in the percentage of patients with complete lung re-expansion (T: 94%, P: 84%) between the two groups. Conclusion: Application of the $Pleuracan^{(R)}$ catheter for the initial treatment of primary spontaneous pneumothorax was as effective as the large bore chest tube.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.5
• /
• pp.9-16
• /
• 2007

Since the liquid phase LPG injection(LPLI) system has an advantage of higher power and lower emission characteristics than the mixer type fuel supply system, many studies and applications have been conducted. However, the heat extraction, due to the evaporation of liquid fuel, causes not only a dropping of LPG fuel but also icing phenomenon that is a frost of moisture in the air around the nozzle tip. Because both lead to a difficulty in the control of accurate air fuel ratio, it can result in poor engine performance and a large amount of HC emissions. The experimental investigation was carried out on the bench test rig in this study. It was found that n-butane, that has a relatively high boiling point($-0.5^{\circ}C$), was a main species of droplet composition and also found that the droplet problem was improved by the use of a large inner to outer bore ratio nozzle whose surface roughness is smooth. The icing phenomena were decreased when the an engine head temperature was increased, although a large amount of icing deposit was still observed in the case of $87^{\circ}C$. Also, it was observed that the icing phenomenon is improved by using anti-icing bushing.

• Journal of Chest Surgery
• /
• v.36 no.1
• /
• pp.51-54
• /
• 2003

This patient was an 53-year-old man who had undergone Sengstaken-Blackmore tube insertion for esophageal varix bleeding. Two days after Sengstaken-Blackmore tube insertion, he developed severe left hemothorax and was transferred to our hospital. The esophagoscopic findings revealed a large perforation lengthening 8-cm in the intrathoracic esophagus. A left thoracotomy was performed 33 days after the injury due to repeated varix bleedings and poor conditions. An 8-cm longitudinal perforation of the intrathoracic esophagus with gross suppurative empyema was found. Primary repair and esophageal exclusion was performed 2cm proximal and distal to the perforation, using rows of nonabsorbable staplers(TA stapler 60 $\times$ 4.8) and large bore thoracostomy tubes were placed for local drainage. Six days after intrathoracic esophageal exclusion, an esophagogram revealed a leakage at just above the proximal stapling site. A cervical esophageal exclusion was performed using the same method. One hundred thirty seven days after exclusion operation for the intra-thoracic esophageal perforation, the patient was able to eat per orally without any secondary esophageal reconstructive surgery.

• Interaction and multiscale mechanics
• /
• v.4 no.4
• /
• pp.291-311
• /
• 2011

To simulate the self excited torsional vibrations of rotating drill strings (DSs) in vertical bore-holes, the nonlinear wave models of homogeneous and sectional torsional pendulums are formulated. The stated problem is shown to be of singularly perturbed type because the coefficient appearing before the second derivative of the constitutive nonlinear differential equation is small. The diapasons ${\omega}_b\leq{\omega}\leq{\omega}_l$ of angular velocity ${\omega}$ of the DS rotation are found, where the torsional auto-oscillations (of limit cycles) of the DS bit are generated. The variation of the limit cycle states, i.e. birth (${\omega}={\omega}_b$), evolution (${\omega}_b<{\omega}<{\omega}_l$) and loss (${\omega}={\omega}_l$), with the increase in angular velocity ${\omega}$ is analyzed. It is observed that firstly, at birth state of bifurcation of the limit cycle, the auto-oscillation generated proceeds in the regime of fast and slow motions (multiscale motion) with very small amplitude and it has a relaxation mode with nearly discontinuous angular velocities of elastic twisting. The vibration amplitude increases as ${\omega}$ increases, and then it decreases as ${\omega}$ approaches ${\omega}_l$. Sectional drill strings are also considered, and the conditions of the solution at the point of the upper and lower section joints are deduced. Besides, the peculiarities of the auto-oscillations of the sectional DSs are discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.1
• /
• pp.54-64
• /
• 1995

The effects of swirl on early flame development and late combustion characteristic were investigated using a high speed single-shot visualized 51 engine. LDV measurements were performed to get better understanding of the flow field in this combustion chamber. Spark plugs were located at half radius (R/2) and central location of bore. High speed schlieren photographs at 20,000 frames/sec were taken to visualize the detailed formation and development of the flame kernel with cylinder pressure measurements. This study showed that high swirl gave favorable effects on combustion-related performances in terms of the maximum cylinder pressure and flame growth rate regardless of spark position. However, at R/2 ignition the low swirl shown desirable effects at low engine speed gave worse performances as engine speed increased than without swirl. There were distinct signs of slow-down in flame growth during the period when the flame front expanded from 2.5mm in radius until it reached 5.0mm apparently due to the presence of ground electrode. There seemed to be heat transfer effect on the flame expansion speed which was evidenced in high swirl case by the slowdown of the late flame front presumably caused by relatively large heat loss from burned gas to wall compared with low- or no-swirl cases.

• ALGAE
• /
• v.31 no.4
• /
• pp.289-301
• /
• 2016

Floating debris provides substrates for dispersal of organisms by ocean currents, including algae that thrive on plastics. The 2011 earthquake and tsunami in Tohuku, Japan resulted in large amounts of debris carried by the North Pacific Current to North America from 2012 to 2016. In 2015-2016, the plastics in the debris bore a complex biota including pink algal crusts. One sample (JAW4874) was isolated into culture and a three-gene phylogeny (psbA, rbcL, and SSU) indicated it was an unknown member of the red algal class Stylonematophyceae. It is a small pulvinate crust of radiating, branched, uniseriate filaments with cells containing a single centrally suspended nucleus and a single purple to pink, multi-lobed, parietal plastid lacking a pyrenoid. Cells can be released as spores that attach and germinate to form straight filaments by transverse apical cell divisions, and subsequent longitudinal and oblique intercalary divisions produce masses of lateral branches. This alga is named Tsunamia transpacifica gen. nov. et sp. nov. Sequencing of additional samples of red algal crusts on plastics revealed another undescribed Stylonematophycean species, suggesting that these algae may be frequent on drift oceanic plastics.

• Journal of Yeungnam Medical Science
• /
• v.31 no.1
• /
• pp.17-20
• /
• 2014

Iatrogenic femoral artery pseudoaneurysm is a complication in patients undergoing catheterization. The risk increased when large-bore sheaths, concomitant anticoagulation therapy, and antiplatelet therapy are used during the intervention. Ultrasound-guided thrombin injection has become the treatment of choice. Rapid expansion, rupture, infection, and mass effect resulting in distal or cutaneous ischaemia or peripheral neuropathy, as well as failure of other treatment options are all indications for surgery. We report a 48-year-old man who developed hemorrhagic shock due to femoral pseudoaneurysm rupture after coronary angiography, and successfully treated by ultrasound-guided thrombin injection.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2006.05a
• /
• pp.1285-1289
• /
• 2006

In a large diameter piping system, high frequency energy can produce excessive noise, high vibration, and failures of thermo-well, instrumentation, and attached small-bore piping. High frequency energy is generated by flow induced vibration like vortex shedding in orifices and valves. Once this energy is generated, amplification may occur from acoustical and/or structural resonances, resulting in high amplitude vibration and noise. At low frequencies, pipe vibration occurs laterally along the pipe's length, but at higher frequencies, the pipe shell wall vibrates radially across its cross-section. The simple beam analogy which is based on the beam mode vibration can not be applied to evaluate shell mode vibration. ASME OM3 recommends that the stress be measured directly by strain gauge and be evaluated according to the fatigue curves of the piping material. This Paper discusses the excitation and amplification mechanism relevant to high frequency energy generation in piping system, the monitoring method of the shell mode vibration in ASME OM3, the evaluation method generally used in the industry. Finally this paper presents the stress evaluation of the cavitating venturi down stream piping, where high frequency shell mode vibrations were observed during the operation.

• Journal of Magnetics
• /
• v.14 no.2
• /
• pp.75-79
• /
• 2009

Nickel (Ni) and ferrite ($Fe_3O_4$, $NiFe_2O_4$) nanoparticles were synthesized by LGC using both wire feeding (WF) and micron powder feeding (MPF) systems. Phase evolution and magnetic properties were then investigated. The Ni nanopowder included magnetic-ordered phases. The LGC synthesis yielded spherical particles with large coercivity while the abnormal initial magnetization curve for Ni indicated a non-collinear magnetic structure between the core and surface layer of the particles. Since the XRD pattern cannot actually distinguish between magnetite ($Fe_3O_4$) and maghemite (${\gamma}-Fe_2O_3$) as they have a spinel type structure, the phase of the iron oxide in the samples was unveiled by $M{\ddot{o}}ssbauer$ spectroscopy. The synthesized Ni-ferrite consisted of single domain particles, including an unusual ionic state. The synthesized nanopowder bore an active surface due to the defects that affected abnormal magnetic properties.