• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.92.3-92
• /
• 2001

This paper is concerned with robust attitude control of large space structures with collocated sensors and actuators. Since the transfer function matrices of such systems are symmetric, it seems suitable to employ symmetric controllers. This paper shows that it is true if no constraint is imposed on the orders of the controllers, but it is not true if the orders of the controllers are specified to be lower than that of the system to be controlled.

• 한국공간구조학회논문집
• /
• 제18권1호
• /
• pp.93-100
• /
• 2018

The retractable roof structures have actions of various types of loads and external forces depending on the retraction and operation conditions of the roof in terms of efficiency of control and maintenance as the aspect of structural plan. In particular, there is a need for studies on the establishment of retraction controlled wind velocity to maintain the stable control and usability of roof structure against strong winds or sudden gusts during the retraction of the roof. In this paper, it was intended to provide basic materials for the development of guidelines on the operation and maintenance of domestic retractable buildings with large space by analyzing the factors affecting the retraction controlled wind velocity for the overseas stadiums with the large spatial retractable roof structures where the sliding system was applied on the steel retractable systems. As a result, the controlled wind velocity tends to decrease as the retractable roof area increases. On the other hand, the controlled wind velocity tends to increase as the retraction time increases. In addition, in the space-grid roof structures, the spherical roof structures type showed the average controlled wind velocity of 10m/sec lower than that of 17.3m/sec for curved-roof structure type, and in the curved-roof structure type, the truss roof structure showed the average controlled wind velocity of 8.9m/sec which is lower than that of 17.3m/sec for the space for the space-grid roof structure.

• 한국공간구조학회논문집
• /
• 제7권2호
• /
• pp.97-104
• /
• 2007

최근 산업 발전과 더불어 대공간 건축물의 수요가 급증하고 있다. 이 분야 선진 기술은 지간 300m 이상의 대공간 건축물 실현도 가능하게 하고 있다. 대공간 구조에는 쉘구조, 스페이스 프레임 구조, 막구조, 케이블구조 등이 있다. 대공간 건축물은 기둥 없이 넓은 공간을 확보해야 하는 구조적 특성 때문에 설계초기 단계에서부터 시공문제를 병행하여 검토할 필요가 있다. 대공간 건축물 시공에 있어서 erection 공법은 공사비용, 공사기간 그리고 안전성 등에 큰 영향을 주는 것으로 알려져 있다. 대공간 건축물 erection 공법은 현장 여건 및 제반 조건에 따라서 그 수를 헤아릴 수 없을 정도로 많고 다양하지만, 대표적인 공법으로는 Element 방식, Block 방식, Sliding 방식, Lift-up 방식 그리고 복합방식 등이 있다. 본 연구에서는 기존 대공간 건축물을 대상으로 시공당시 적용한 erection공법을 조사하여 이것을 규모별, span별, 층고별, 구조형식별로 분석 및 검토하여 향후 대공간 건축물의 효율적 erection 공법 개발을 위한 기초 자료를 제공하는데 그 목적이 있다.

• Structural Engineering and Mechanics
• /
• 제90권6호
• /
• pp.543-549
• /
• 2024

The utilization of the fabric materials for lightweight building structures has attracted considerable attention due to the multiple functions and high strength-to-weight ratio. The mechanical properties of the fabric materials evolve with the loading cycle, especially for the Poisson's ratio that requires the full cyclic strain to determine the accurate values. The digital image correlation method has been justified but needs to meet the flexibility and complexity requirements of the fabric materials. This paper thus proposes a modified digital image correlation method to quantify the Poisson's ratio of fabric materials. To obtain the accurate Poisson's ratio of fabric materials in the cyclic experiments using non-contact measuring method, a speckle generation of the digital image correlation method is implemented to obtain the strain distribution and strain characteristics. The uniaxial cyclic experiments for the fabric materials are carried out in the warp, weft and 45° directions. The digital image correlation photos are taken when the material properties become stable in the cyclic loading. The results show that the strain distributions are non-uniform and dependent on the specimen directions. The reliable Poisson's ratios of the fabric materials in the warp, weft and 45° directions are 0.016, 1.2 and 2.6. The strain asymmetry at the maximum strain position is related with the weaving architecture. These observations and results are indispensable to understand the Poisson's ratios of fabric materials and to guide the proper analysis of the large-span membrane structures.

• 천문학회보
• /
• 제43권2호
• /
• pp.37.2-37.2
• /
• 2018

We present the results from a spectroscopic survey of the nearby galaxy cluster Abell 2107 at z=0.04 that has been known as a rotating cluster. By combining 978 new redshifts from the MMT/Hectospec observations with the data in the literature, we construct a large sample of 1968 galaxies with measured redshifts at R<60', which results in high (80%) and spatially uniform completeness at $m_{r,Petro,0}<19.1$. We use this sample to study the global rotation of the cluster and its connection to the large-scale structures in the universe. We first apply the caustic method to the sample and identify 285 member galaxies in Abell 2107 at R<60'. We then measure the rotation amplitude and the position angle of rotation axis. The member galaxies show strong global rotation at R<20' ($V/{\sigma}{\sim}0.60-0.70$) with a significance of >3.8 ${\sigma}$, which is confirmed by two independent methods. The rotation becomes weaker in outer regions. We find at least four filamentary structures at $R<30h^{-1}Mpc$ smoothly connected to the cluster galaxies, which can suggest that the global rotation of the cluster is induced by the inflow of galaxies from the surrounding large-scale structures in the universe.

• 한국공간구조학회논문집
• /
• 제18권3호
• /
• pp.75-82
• /
• 2018

Large space structures exhibit different natural vibration characteristics depending on the aspect ratio of structures such as half-open angle. In addition, since the actual large space structure is mostly supported by the lower structure, it is expected that the natural vibration characteristics of the upper structure and the entire structure will vary depending on the lower structure. Therefore, in this study, the natural vibration characteristics of the dome structure are analyzed according to the natural frequency ratio by controlling the stiffness of the substructure. As the natural frequency of the substructure increases, the natural frequency of the whole structure increases similarly to the natural frequency of the upper structure. Vertical vibration modes dominate at $30^{\circ}$ and $45^{\circ}$, and horizontal vibration modes dominate at $60^{\circ}$ and $90^{\circ}$.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2001년도 Proceeding of KIN-CIN Joint Symposium 2001 on Satellite Navigation/AIS, lntelligence , Computer Based Marine Simulation System and VDR
• /
• pp.153-168
• /
• 2001

In the country where the population concentrates in the metropolis with the narrow land, development of th ocean space is necessary. Recently, mega-float offshore structure is studied as one of the effective utilization of the ocean space. And very large floating structure are now being considered for various applications such as floating airports, offshore cities and so on. This very large structure is relatively flexible compared with real floating structures like large ships. when we estimate dynamic responses of these structures in waves, the elastic deformation is important, because vertical dimension is small compared with horizontal. And it is necessary to examine the effect of ocean wave eternal force received from the natural environment. In this study, the mat-type large floating structure is made to be analytical model. And the analysis of the dynamic response as it receives regular wave is studied. The finite element method is used in the analysis of structure part of this model. And the analysis is carried out using the boundary element method in the fluid part. In order to know the characteristics of the dynamic response of the large floating structures, effects of wavelength, bending rigidity of the structure, water depth, and wave direction on dynamic response of the floating structure are studied by use of numerical calculation.

• 한국공간구조학회지
• /
• 제17권1호
• /
• pp.19-22
• /
• 2017

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.45-48
• /
• 2008

Periodic lattice structures such as the large space lattice structures and carbon nanotubes may take the extension-transverse shear-bending coupled vibrations, which can be well represented by the extended Timoshenko beam theory. In this paper, the spectrally formulated finite element model (simply, spectral element model) has been developed for extended Timoshenko beams and applied to some typical periodic lattice structures such as the armchair carbon nanotube, the periodic plane truss, and the periodic space lattice beam.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1403-1406
• /
• 2008

Periodic lattice structures such as the large space lattice structures and carbon nanotubes may take the extension-transverse shear-bending coupled vibrations, which can be well represented by the extended Timoshenko beam theory. In this paper, the spectrally formulated finite element model (simply, spectral element model) has been developed for extended Timoshenko beams and applied to some typical periodic lattice structures such as the armchair carbon nanotube, the periodic plane truss, and the periodic space lattice beam.