• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.19-29
• /
• 2006

일본 최초의 파일럿 규모의 $CO_2$ 지중저장 프로젝트가 Niikgata 현 Nagaoka 시 근처 육상 염수 대수층에서 착수되었고 시간차 물리검층이, 주입된 $CO_2$의 도착과 저류층내의 $CO_2$ 포화도를 평가하기 위해 관측정들에서 실시되었다. $CO_2$는 20-40톤/일 의 속도로 1,110m 심도에 위치한 얇은 투수층에 주입되었다. 2003년 7월에서 2005년 1월까지 주입된 $CO_2$의 총량은 10,400 톤이다. 파일럿 규모의 시험은 3 개의 관측정들에서 시간차 물리검층을 수행함으로써 다공성 사암 저류층 내에서의 $CO_2$ 유동에 대한 이해를 높였다. 관측정 OB-2 에서 fiberglass 케이싱을 넣기 전과 넣은 후의 중성자 검층의 비교는 대상층 내에서 좋은 일치를 보였고 저류층 내에서 셰일 부피의 농도가 높을수록 두 물리검층 결과들 사이의 차이도 커졌다. 확인가능한 $CO_2$ 는 전자유도검층, 음파검층, 중성자검층에 의해 발견되었다. 음파검층으로부터 P 파 속도의 감소가 Nagaoka 현장에서 채취한 코아 시료에 대한 실험실 측정과 매우 잘 일치함을 확인하였다 세 개의 관측정 중 두 개에서 $CO_2$ 가 확인된 후, 음파 검층의 P파 속도와 추정된 $CO_2$ 포화도의 변화 추이를 성공적으로 맞출 수 있었다. 음파 속도의 시간변화 부합 결과는 sweep 효율성이 약 40%였음을 제시한다. 전기비저항에 대한 $CO_2$ 의 작은 영향으로 인하여 저류층이 부분적으로 포화되었을 때 전자유도검층에서는 작은 변화를 보여준다. 또한 $CO_2$ 부존층에서 $CO_2$의 포화도는 $CO_2$ 주입의 일시 중지 시에도 반응함을 발견하였다.

• KIEAE Journal
• /
• 제11권6호
• /
• pp.87-93
• /
• 2011

This study examines building's power consumption unit cost and Building Integrated Photovoltaic (BIPV)'s generation efficiency and load rate with the subjects of university dormitory buildings in order to suggest foundational data for new and recycled energy use and management to plan and operate university dormitories afterwards. Thereby, this research gained the following findings. 1. The quantity of solar radiation and efficiency change in the BIPV system applied to the research subject buildings after the lapse of time was averagely 8.7%, and it is thought that temperature increase determines conversion efficiency with the influence of surrounding outside temperature and the module's temperature. 2. The generation efficiency of the BIPV system in the research subject buildings was averagely 10.9%. In May, it was 13.9%, and in January, it was the lowest as 10.25%. Considering the fact that power consumption reduces during an intermediate period, it will be necessary to establish measures for equipment and power consumption load balancing. 3. The monthly load rate of the BIPV system was averagely 4.09%. In May, it was the highest as 4.94%, and in July, it was the lowest as 3.24%. 4. It is intended to conduct constant follow-up research on estimating university dormitory building's power consumption unit cost and examining the generation efficiency and load rate of the BIPV system.

• 복식문화연구
• /
• 제10권6호
• /
• pp.735-747
• /
• 2002

This study aimed at investigating the change of fat in each body part according to the wearing of sport underwear made of specially-processed materials. in this study. 6 females made up of three early twenties, and three later thirties took part in the exercises for 12 weeks to to out the change of fat amount in body, square of body part by CT and obesity after and before an exercise. The results are as follows: In the obesity condition after and before an exercise, Roller's index shows that in case of 51 and 54, one level was lowered concerning the basic physical strength and optimal index was not changed. In the silhouette between body frames. there are differences between ages. The body fat rate decreased 35.95% on the average. and the amount of the body fat of females in twenties was more than that in thirties. The amount of body fat decrease with the lapse of exercising time, while the amount of body fat shows increased of 0.75%, which showed the minus correlation. The rate of averaged flat by CT went up after an exercise in every body part. and also the decreased value of subcutaneous fat was not proportioned to that of weight and girth. Inbody parts, the lower abdomen was shown 49.7%, navel part 47.7% and waist part 37.3% each in numerical value. In the thickness of subcutaneous fat concerning waist, the value of front-center line was the lowest, and followed by rear-center line and lateral line. 1204degree part in the navel showed the most fat layed, and the lowest fat layed was in the lateral part. Concerning the lower part of abdomen, under-skin fat was the most layed in 120degree part like that of navel part.

• 대한치과기공학회지
• /
• 제38권4호
• /
• pp.263-272
• /
• 2016

Purpose: The purpose of this study is to measure and compare a degree of setting expansion of dental stone by time depending on the mixing methods and mixing ratios of dental stone, to compare the surface state of each specimen with the use of an optical camera with microscope, and thereby to provide a fundamental material for making dental prostheses. Methods: The test on setting expansion of dental stone is based on ISO 6873. With two different mixing ratios and three kinds of stone mixing methods, test groups were created, and a total of six types of specimens (N=30) were made. Based on the specimens, the setting expansion rate of each one was measured in each time slot of 24 hours, and the surface of the set stone was measured. Results: According to the analysis on setting expansion rate of stone, the setting expansion of the specimen that was created in the way of vacuum mixing at normal mixing ratio was 0.1944% at 120 minutes; the setting expansion of the specimen that was created in the way of vacuum mixing at the mixing ratio which was 40% higher than normal mixing ratio was 0.195% at 120 minutes; the setting expansion of the specimen that was created in the way of mixing with hands at normal mixing ratio and then removing bubbles in vacuum mixer was 0.196% at 120 minutes. Conclusion: The setting expansion rate of each dental stone specimen was significantly different with the lapse of time up to 24 hours(p<.001).

• 직업교육연구
• /
• 제35권6호
• /
• pp.39-63
• /
• 2016

이 연구의 목적은 실업자가 훈련프로그램을 수료한 이후에 실업자의 실제적인 취업률과 고용유지율에 영향을 미치는 변인을 구명하는 데 있었다. 이를 위해 2012년 훈련서비스 품질 등에 관한 설문조사에 응답한 국가기간 전략산업직종(이하 '기간전략') 훈련생(889명) 중에서 최종적으로 수료한 훈련생(840명)의 훈련과정 종료 후 2년 이상의 고용보험 가입여부 및 가입기간 등에 관한 자료를 활용하여 생존분석(생명표 분석, Cox 회귀모형 분석)을 실시하였다. 이 연구의 주요 결과는 첫째, 수료 후 취업률이 가장 높은(36.8%) 시기는 3개월 이내이고, 전체 훈련생의 50% 이상이 취업한 시기는 6개월 이내로 나타났다. 수료 후 1년과 2년이 경과된 시점까지도 지속적으로 취업이 발생하고 있지만, 시간이 지날수록 취업률은 점점 감소하는 것으로 나타났다. 둘째, 수료 후 취업률에 영향을 미치는 변인은 훈련서비스 품질 중 교수역량(-)과 고용가능성(+)으로, 교수역량을 낮게 인식할수록, 자신의 고용가능성을 높게 인식할수록 취업확률이 높게 나타났다. 셋째, 취업 후 고용상실률이 가장 높은(각 22.0%, 22.3%) 시기는 3개월 이내와 3~6개월 이내이고, 전체 훈련생의 50% 이상이 고용보험을 상실한 시기는 8.8개월 이내로 나타났다. 넷째, 취업 후 고용유지율에 영향을 미치는 변인은 훈련서비스 품질 중 교사-학생관계(+), 학우관계(+), 훈련만족도(+)로, 교사-학생관계와 학우관계의 품질을 높게 인식할수록, 훈련만족도를 높게 인식할수록 취업 후 고용유지확률이 높게 나타났다.

• 한국식품저장유통학회지
• /
• 제6권1호
• /
• pp.1-6
• /
• 1999

Fresh gingers, harvested in Seosan, Choongcheongnam-do, were pre-treated by a washing-pasteurizing-drying process, a curing process, and non-treated, respectively. Then they were stored in a lab-scale storage room(12$^{\circ}C$, >92%RH) to investigate the effect of pre-treatment methods on the quality changes during long-term storage. Weight loss of ginger during storage showed ranges in 0.7∼4.3%, and the weight of gingers pre-treated by washing-drying process showed a tendency to change less than those treated by curing. After storage of 130 days, spoilage rates were about 20% in non-treated, 11% in curing treated, and 12% in washing-drying treated ginger,, showing the effect of pre-treatment. The final rate of sprouting was 13∼15% regardless of treatment methods. The firmness of gingers showed a tendency to decrease in stored ginger for the longer period; however, the values were ranged from 1,200 to 1,400 g/$\textrm{cm}^2$, that is hard enough to show a marketable quality. The contents of reducing sugar showed a tendency to increase with the lapse of storage time.

• Korea-Australia Rheology Journal
• /
• 제19권4호
• /
• pp.211-219
• /
• 2007

Here we demonstrate complex transient behavior of viscoelastic liquid described numerically with the Leonov model in straight and contraction channel flow domains. Finite element and implicit Euler time integration methods are employed for spatial discretization and time marching. In order to stabilize the computational procedure, the tensor-logarithmic formulation of the constitutive equation with SUPG and DEVSS algorithms is implemented. For completeness of numerical formulation, the so called traction boundaries are assigned for flow inlet and outlet boundaries. At the inlet, finite traction force in the flow direction with stress free condition is allocated whereas the traction free boundary is assigned at the outlet. The numerical result has illustrated severe forward-backward fluctuations of overall flow rate in inertial straight channel flow ultimately followed by steady state of forward flow. When the flow reversal occurs, the flow patterns exhibit quite complicated time variation of streamlines. In the inertialess flow, it takes much more time to reach the steady state in the contraction flow than in the straight pipe flow. Even in the inertialess case during startup contraction flow, quite distinctly altering flow patterns with the lapse of time have been observed such as appearing and vanishing of lip vortices, coexistence of multiple vortices at the contraction comer and their merging into one.

• 한국군사과학기술학회지
• /
• 제17권3호
• /
• pp.304-310
• /
• 2014

Based on atmosphere weather data by balloon in Osan and Gwangju area, if icing condition occurs in weather environment of altitude range where helicopter is operated was analyzed in quantitative way. Yearly icing occurrence frequency for daytime during recent three years was average 102 days in Osan, average 91 days in Gwangju. Icing weather environment to highly affect operation of helicopter varies a little according to analysis methods but icing intensity at MDT level was calculated in all the methods, and 14.5~38 times was suggested in Osan; 2.5~30 times in Gwangju. Icing at MDT level was calculated in common in all the analysis methods through wide periods such as Jan., Feb., Mar., and Nov. in Osan. In Gwangju, icing at MDT level was suggested focusing on Jan. only. Therefore, military helicopter developed in Korea is required to strive obtaining certificate of airworthiness about icing condition at MDT level for implementation of perfect operational mission and safe operation.

• Journal of Ginseng Research
• /
• 제7권2호
• /
• pp.156-162
• /
• 1983

Stability of nitrogen compounds in the water-extract of ginseng has been investigated in terms of concentration and SDS-PAGE protein pattern as functions of times and temperature. The concentration of free amino-nitrogen in the extract of fresh ginseng varied with time at various temperatures. Especially at temperature over 90$^{\circ}C$, it showed a tendency of steady declease at a considerably fast rate. In the case of red ginseng which had been commercially processed and stocked for 1-7 years, it was found that the free amino-N concentration diminished gradually depending on the length of stock period of samples. This result may be comparative to another observation that the amount and density distribution of precipitate from extract varied with the lapse of stock time, based on accelerated sedimentation test. The number of SDS-PAGE protein bands was observed to be at least seven when determined with the extract of fresh ginseng. However, it tended to reduce finally to be one band when the extract was kept at a rather high temperature for a long time.

• 한국자동차공학회논문집
• /
• 제4권3호
• /
• pp.211-219
• /
• 1996

In a small high-speed D. I. diesel engine, the injected fuel spray into the atmosphere of the high temperature is burnt by go through the process of break up, atomization, evaporation and process of ignition. These process are important to decide the emission control and the rate of fuel consumption and out put of power. Especially, in the case of injected fuel spray impinging on the wall of piston cavity, the geometry of piston cavity gives great influence the ignitability of injected fuel and the flame structure. Ordinary, the combustion chamber of driving engine have unsteady turbulent flow be attendant on such as the change of temperature, velocity and pressure. So the analysis of spray behavior is difficult. In this study, the spray was impinged on the wall of 3 types of piston cavity such as Dish, Toroidal, Re-entrant type, in order to analyze the combustion process of impinging spray precisely and systematically. And hot wire probe was used for analyze non-steady flow characteristics of impinging spray, and to investigate the behavior of spray, the aspects of concentration c(t), standard deviation σ(t) and variation factor(vf) was measured with the lapse of time.