• Journal of Korean Society of Transportation
• /
• v.32 no.5
• /
• pp.473-486
• /
• 2014

This study aims to review whether climbing lane installment is needed by analyzing the impact that standard trucks have on traffic according to vertical alignment at SMART highway, and if climbing lanes are required to propose truck speed change curves based on slope length. We used VISSIM simulation model to obtain the speed change of the standard truck on uphill roads. The standard truck on climbing lanes was set for 100kg/kW (170lb/hp) with the entry speeds set and analyzed by 90, 100, and 110 km/h considering the future speed limit of trucks. The results of the research show that under SMART highway circumstance, the 1 and 2% vertical alignment is not needed at the climbing lane but 3% vertical alignment is necessary. In order to install the climbing lane at 3% vertical alignment, the speed change curve of truck depending on slope length of 90, 100, and 110km/h of entry speed is proposed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.799-806
• /
• 2004

This paper presents a scheme for finding an optimal combination of design parameters affecting on the handling performance of a large truck using design of experiments. The average of the sum of peak-to-peak roll angles at the first and second part of the double lane is used as an objective function for design of experiments. Six design parameters are selected from all possible parameters affecting on the handling performance. The table of orthogonal arrays is made by 27 times simulations. A computational model of a large truck is developed by MSC/NASTRAN and MSC/ADAMS, and verified the reliability of it with the results of vehicle tests performed in a double lane change course. It is used for the simulations. Analyses of variance and factor effect of the table of orthogonal arrays are performed. This paper proposes an optimal combination of those six design parameters for improving the handling performance of the large truck.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.311-317
• /
• 2011

The blind spot is an area where drivers visibility does not reach. When drivers change a lane to adjacent lane, they need to give an attention because of the blind spot. If drivers try to change lane without notice of vehicle approaching in the blind spot, it causes a reason to have a car accident. This paper proposes a night-time blind spot vehicle detection using cameras. At nighttime, head-lights are used as characteristics to detect vehicles. Candidates of headlight are selected by high luminance feature and then shape filter and kalman filter are employed to remove other noisy blobs having similar luminance to head-lights. In addition, vehicle position is estimated from detected head-light, using virtual center line represented by approximated the first order linear equation. Experiments show that proposed method has relatively high detection porformance in clear weather independent to the road types, but has not sufficient performance in rainy weather because of various ground reflectors.

• International Journal of Highway Engineering
• /
• v.16 no.4
• /
• pp.11-19
• /
• 2014

PURPOSES: This study is to suggest the improvement for bus rapid transit system in Seoul METHODS: The maintenance cost for bus lane damages and plastic deformations are increased by bus passing speed, heavy bus weight, and climate change (localized torrential downpour, subtropical climate) and the accident risk has been increased. RESULTS: Recent analysis of pavement damage indicates that bus lane damage caused by heavy weight is overwhelming and it is urgent to prepare countermeasures. CONCLUSIONS : Pavement data of bus rapid transit system, bus transit numbers and pavement damage elements were analyzed. By analyzing pavement maintenance, design and construction, the countermeasures for the improvement of bus lane pavement and effective maintenance were suggested.

• Journal of Drive and Control
• /
• v.19 no.3
• /
• pp.47-52
• /
• 2022

The C-ITS (Cooperative-intelligent Transport System) is a driver assistance system that prevents car accidents and enhances traffic conditions, via sharing traffic information between vehicles and roadway infrastructures. A CLAS (changing lane assistance system) for unprotected left-turn, is a C-ITS that assists a driver with safely changing lanes. This system addresses a driver's critical gap, that enables the system to express a driver's uncertainty. A driver's critical gap is a time that can be used in a threshold, to change a lane or not. Unfortunately, a driver's critical gap is difficult to use in a CLAS directly. This paper addresses a driver's critical gap, and how it can be applied in a CLAS for an unprotected left-turn.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.3
• /
• pp.33-44
• /
• 2007

Prohibition of lane changes in bridges and tunnels have been many problems in throughputs of expressways caused by heavy vehicles and slow-moving traffics. Nevertheless, those are constructed actively by the general trends, which are preservation of environment and ecosystem are more important, because mountainous districts are about 70% across the whole extent of Korea. In this paper, the proper design standards for permission of lane changes in bridges and tunnels classified into structure, safe, and driver's conveniences are suggested as follows. 1. Right shoulder should have more than 2.5m in bridges and tunnels. 2. Sufficient equipments of guidance like as directional signs, fingerposts, variable message signs, and markings should be established to smooth and safe lane changes of drivers. 3. Snow melting systems should be established in bridges worried about freezing. 4. Tunnels must be not only satisfied standards for prevention of disasters (2004.11) and lighting rules (KSA 3703), but also established anti-freezing facilities in entrance and exit. 5. The drivers should have honed on their car lights.

• Journal of Korea Society of Industrial Information Systems
• /
• v.22 no.6
• /
• pp.9-16
• /
• 2017

An Algorithm for Lane Detection and Lane Departure Warning for a Vehicle Driving on Roads is proposed in This Paper. Using Images Obtained from On-board Cameras for Lane Detection has Some Difficulties, e.g. the Increase of Fault Detection Ratio Due to Symbols on Roads, Missing Yellow Lanes in the Tunnel due to a Similar Color Lighting, Missing Some Lanes in Rainy Days Due to Low Intensity of Illumination, and so on. The Proposed Algorithm has been developed Focusing on Solving These Problems. It also has an Additional Function to Determine How much the Vehicle is leaning to any Side between The Lanes and, If Necessary, to Give a Warning to a Driver. Experiments Using an Image Database Built by Collecting with Vehicle On-board Blackbox in Six Different Situations have been conducted for Validation of the Proposed Algorithm. The Experimental Results show a High Performance of the Proposed Algorithm with Overall 97% Detection Success Ratio.

• Smart Media Journal
• /
• v.6 no.3
• /
• pp.15-20
• /
• 2017

Recently, the automotive industry has been studied about driver assistance systems for helping drivers to drive their cars easily by integrating them with the IT technology. This study suggests a method of detecting lanes, robust to road condition changes and applicable to lane departure warning and autonomous vehicles mode. The proposed method uses the method of detecting candidate areas by using the Gaussian filter and by determining the Otsu threshold value and edge. Moreover, the proposed method uses lane gradient and width information through the Hough transform to detect lanes. The method uses road lane information detected before to detect dashed lines as well as solid lines, calculates routes in which the lanes will be located in the next frame to draw virtual lanes. The proposed algorithm was identified to be able to detect lanes in both dashed- and solid-line situations, and implement real-time processing where applied to Raspberry Pi 2 which is open source hardware.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2019.05a
• /
• pp.18-20
• /
• 2019

In this paper, in order to prevent accidents when deviating from the lane during high-speed self-driving, we are going to design a warning system that will sound an alarm after recognizing the surrounding situation with a $360^{\circ}$ camera. Accidents often occur while driving on self-driving cars because they try to change lanes excessively or fail to recognize people, animals and objects that appear suddenly when driving at high speeds. The government wants to identify the surrounding situation with cameras when driving off a lane during high-speed autonomous driving, and to create a car that sounds a warning system through a lane departure sensor on the underside of the vehicle to reduce various accidents that occur during self-driving and to have a safer driving system.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.2
• /
• pp.115-120
• /
• 2015

Recently, in automotive technology area, intelligent safety systems have been actively accomplished for drivers, passengers, and pedestrians. Also, many researches are focused on development of autonomous vehicles. This paper propose the application of LiDAR sensors, which takes major role in perceiving environment, terrain classification, obstacle data clustering method, and local map building for autonomous driving. Finally, based on these results, planning for lane change path that vehicle tracking possible were created and the reliability of path generation were experimented.