• 자동차안전학회지
• /
• 제9권1호
• /
• pp.6-12
• /
• 2017

Regulation for the testing and operation of automated vehicles on public roadways has been recently developed all over the world. For example, the licensing standards and the evaluation technology for automated vehicles have been proposed in California, Nevada and EU. But specific safety evaluation scenarios for automated vehicles have not been proposed yet. This paper presents safety evaluation scenarios for extraordinary service permission of automated vehicles on highways. A total of seven scenarios are selected in consideration of safety priority and real traffic situation. Six scenarios are relevant with lane keeping and one scenario is relevant with lane change. All scenarios are developed based on existing ADAS evaluation scenarios and repeated simulation of automated vehicle algorithm. Safety evaluation factors as well as scenarios are developed. The safety factors are based on existing ADAS ISO requirements, ADAS safety factors and current traffic regulations. For the scenarios, a hunter vehicle is needed in addition to automated vehicle evaluated. The hunter vehicle performs multiple roles like preceding vehicle, cut-in vehicle and so on. The hunter vehicle is also automated vehicle equipped with high performance GPS, radar and Lidar. All the scenarios can be implemented by driving a lap on a KATRI ITS test track. These scenarios and safety evaluation factors are investigated via both a computer simulation and an experimental vehicle test on the test track. The experimental vehicle test was conducted with two automated vehicles, which are the evaluated vehicle and the hunter vehicle.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.82-88
• /
• 2006

The study investigated how an adaptive cruise control system induced behavioral adaptation in drivers using a full-scale driving simulator. Forty drivers with different driving styles participated in the study to compare headway-time, vehicle lateral position variation, and head and eye movement when driving with and without the adaptive cruise control system. Results showed that system induced positive behavioral adaptation by drawing consistency in driving speed and headway-time regardless of the driving styles. However, the results also showed that the drivers' reliance on the system induced negative adaptation including reduced lane keeping ability and reduced attention during driving. As a strategy to prevent negative adaptation, the study proposed information service to drivers with the adaptive cruise control system status and driving environment, and investigated effectiveness of the service. Twelve drivers participated in the experiment to compare headway-time, vehicle lateral position variation and subjective ratings when driving with and without the information service. Results showed that the information service assisted the drivers to maintain safer and more comfortable headway-time without impairing drivers' steering ability.

• International Journal of Automotive Technology
• /
• 제7권5호
• /
• pp.603-608
• /
• 2006

As an important and relatively easy to implement technology for realizing Intelligent Transportation Systems(ITS), Adaptive Cruise Control(ACC) automatically adjusts vehicle speed and distance to a preceding vehicle, thus enhancing driver comfort and safety. One of the key issues associated with ACC development is usability and user acceptance. Control parameters in ACC should be optimized in such a way that the system does not conflict with driving behavior of the driver and further that the driver feels comfortable with ACC. A driving simulator is a comprehensive research tool that can be applied to various human factor studies and vehicle system development in a safe and controlled environment. This study investigated driving behavior with ACC for drivers with different driving styles using the driving simulator. The ACC simulation system was implemented on the simulator and its performance was evaluated first. The Driving Style Questionnaire(DSQ) was used to classify the driving styles of the drivers in the simulator experiment. The experiment results show that, when driving with ACC, preferred headway-time was 1.5 seconds regardless of the driving styles, implying consistency in driving speed and safe distance. However, the lane keeping ability reduced, showing the larger deviation in vehicle lateral position and larger head and eye movement. It is suggested that integration of ACC and lateral control can enhance driver safety and comfort even further.

• 제어로봇시스템학회논문지
• /
• 제4권1호
• /
• pp.68-75
• /
• 1998

The Intelligent Cruise Control system, ICC, is a driver assisting system for controlling relative speed and distance between two vehicles in the same lane. The ICC may be considered as an extension of a traditional cruise control, not only keeping a fixed speed of the vehicle, but correcting the speed also to that of a slower one ahead. This paper presents a real-time self-tuning fuzzy control algorithm to develop ICC. The self-tuning fuzzy control law is adopted to reduce the effects of nonlinearities of the vehicle and various road environments. In the self-tuning algorithm an interior penalty method is applied to preserve the inherent order of membership functions and is modified as an on-line algorithm for real time application. Via simulations, the performance of the suggested control algorithm is compared with a PID and a fuzzy control without self-tuning. The suggested control algorithm is implemented on PRV III and the results of the test driving on a local road are given.

• 자동차안전학회지
• /
• 제11권4호
• /
• pp.39-49
• /
• 2019

Autonomous vehicle is a car which drives itself without any human interaction. SAE provides technical definitions for autonomous and international standards for test evaluation. Accordingly, automobile industry is actively researching development and evaluation of various ADAS (Advanced Driver Assistance Systems), : representative technology of autonomous technology. Recently, ADAS is in the commercialization level such as ACC, LKAS, AEB, and HDA etc. And it also has issues about safety evaluation. The purpose of HDA in ADAS is reduced the driving load on highway. It has a function which can maintain lane keeping and control distance from forward vehicle. This function is evaluated to be useful for accident prevention. Therefore, this paper proposes the safety evaluation scenario of HDA, considering the domestic highway design criteria and the situation that may arise on the actual highway. We compared and analyzed the data acquired through simulation and actual vehicle test. And verified the reliability of the proposed safety evaluation scenario. The verified result is expected safety evaluation of HDA is possible even under the bad condition, which cannot be tested.

• 제어로봇시스템학회논문지
• /
• 제22권12호
• /
• pp.1046-1052
• /
• 2016

For the safe driving of autonomous vehicles, accurate position estimation is required. Generally, position error must be less than 1m because of lane keeping. However, GPS positioning error is more than 1m. Therefore, we must correct this error and a map matching algorithm is generally used. Especially, road marking intensity map have been used in many studies. In previous work, 3D LIDAR with many vertical layers was used to generate a local intensity map. Because it can be obtained sufficient longitudinal information for map matching. However, it is expensive and sufficient road marking information cannot be obtained in rush hour situations. In this paper, we propose a localization algorithm using an accumulated intensity local map. An accumulated intensity local map can be generated with sufficient longitudinal information using 3D LIDAR with a few vertical layers. Using this algorithm, we can also obtain sufficient intensity information in rush hour situations. Thus, it is possible to increase the reliability of the map matching and get accurate position estimation result. In the experimental result, the lateral RMS position error is about 0.12m and the longitudinal RMS error is about 0.19m.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.340-347
• /
• 2019

Due to advances in machine intelligence and increased demands for autonomous machines, the complexity of the underlying software platform is increasing at a rapid pace, overwhelming the developers with implementation details. We attempt to ease the burden that falls onto the developers by creating a graphical programming framework we named Splash. Splash is designed to provide an effective programming abstraction for autonomous machines that require stream processing. It also enables programmers to specify genuine, end-to-end timing constraints, which the Splash framework automatically monitors for violation. By utilizing the timing constraints, Splash provides three key language semantics: timing semantics, in-order delivery semantics, and rate-controlled data-driven stream processing semantics. These three semantics together collectively serve as a conceptual tool that can hide low-level details from programmers, allowing developers to focus on the main logic of their applications. In this paper, we introduce the three-language semantics in detail and explain their function in association with Splash's language constructs. Furthermore, we present the internal workings of the Splash programming framework and validate its effectiveness via a lane keeping assist system.

• 자동차안전학회지
• /
• 제11권1호
• /
• pp.7-16
• /
• 2019

There are trying to reduce damage from automobile accident in many countries. In many automobile companies, there have been active study on development of ADAS (Advanced Driver Assistance Systems) for commercialization, in order to reduce damage from automobile accident. ADAS is the system providing convenience and safeness for drivers. Generally, ADAS is composed of ACC (Adaptive Cruise Control), LKAS (Lane Keeping Assist System), and AEB (Autonomous Emergency Braking). AEB of the ADAS, it is an autonomous emergency braking system and it senses potential collide and avoids or degrades it. Therefore AEB plays a significant role in reducing automobile accident rate. However, AEB safety evaluation method is not established not yet. For this reason, this study suggests safety evaluation scenarios with adding cut-in, sensor malfunctioning scenario that scenario domestic street conditions considered as well as original standard AEB scenario of Euro NCAP for establishment of safety evaluation method of AEB. And verifying validity of suggested scenario by comparing the calculated values of the theoretical formulas presented in the previous study with results of the actual vehicle test.

• 드라이브 ㆍ 컨트롤
• /
• 제17권4호
• /
• pp.80-86
• /
• 2020

Autonomous driving is one of the most important new technologies of our time; it has benefits in terms of safety, the environment, and economic issues. Path following algorithms, such as automated lane keeping systems (ALKSs), are key level 3 or higher functions of autonomous driving. Pure-Pursuit and Stanley controllers are widely used because of their good path tracking performance and simplicity. However, with the Pure-Pursuit controller, corner cutting behavior occurs on curved roads, and the Stanley controller has a risk of divergence depending on the response of the steering system. In this study, we use the advantages of each controller to propose a hybrid control strategy that can be stably applied to complex driving environments. The weight of each controller is determined from the global and local curvature indexes calculated from HD map information and the current driving speed. Our experimental results demonstrate the ability of the hybrid controller, which had a cross-track error of under 0.1 m in a virtual environment that simulates K-City, with complex driving environments such as urban areas, community roads, and high-speed driving roads.

• 대한토목학회논문집
• /
• 제31권1D호
• /
• pp.65-72
• /
• 2011

고속도로 분기부 연결로상에서는 연속되는 유출형태가 나타나게 되어, 주행상의 안전성을 고려한 1차, 2차 분류지점 간 적정 이격거리(L)를 확보하는 것은 매우 중요한 사항이다. 본 연구에서는 현행 도로설계 지침에서 제시한 240m라는 동일한 설계기준을 적용하는 대신에, 동 구간에서 운전자에게 필요한 인지반응시간과 차로변경시간을 고려한 적정 이격거리를 산정하는 방식을 제안하였다. 특히 인지반응시간과 관련하여 정지시거 계산에 활용되는 기존의 2.5초와 더불어 기하구조 상의 특성을 고려한 판단시거 계산에 활용되는 보다 긴 인지반응시간을 추가적으로 고려하였다. 더불어 적정 이격거리 산정의 타당성을 확인하기 위해 고속도로 분기점 중 사고가 잦은 네 개의 분기점을 대상으로 교통사고 발생현황을 조사하여, 본 연구에서 검토한 적정 이격거리 산정방법을 적용하여 최소 이격거리를 도출하여 보았다. 연구 결과, 현재의 기준치가 정지시거를 중심으로 할 때는 충분한 최소 이격거리를 제시하고 있지만 판단시거를 중심으로 할 때는 충분하지 못하다는 점을 확인할 수 있었다. 사고가 잦은 현장에서 조사한 차량들의 실제 주행속도가 설계속도와 비교해 월등히 높은 점을 감안한다면, 지침에서 제시하는 것과 같은 획일적인 이격거리의 적용보다는 예상되지 못한 상황을 가정하여 적정 이격거리를 구하게 되는 판단시거를 중심으로 한 이격거리 계산과 설계가 오히려 더 설득력 있을 것으로 사료된다.