• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.2
• /
• pp.80-88
• /
• 2000

This paper presents a method to optimize the bump steer characteristics (the change of toe angle with vertical wheel travel) with respect to hard points in the double wishbone front suspension of the four-wheel-drive vehicle using the design of experiment, multibody dynamics simulation, and optimum design program. Front and rear suspensions are modeled as the interconnection of rigid bodies by kinematic joints and force elements using DADS. The design variables with respect to the kinematic characteristics are obtained through the experimental design sensitivity analysis. An object function is defined as the area of absolute differences between the desired and experimental toe angle. By the design of experiment and regression analysis, the regression model function of bump steer characteristics is extracted. The design variables that make the toe angle optimized are selected using the optimum design program DOT. The lane change simulations and tests of the full vehicle models are implemented to evaluate the improvement of vehicle handling performances by the optimization of front bump steer characteristics. The results of the lane change simulations show that the vehicle with optimized bump steer has the weaker understeer tendency than the vehicle with initial bump steer.

• Journal of the Korea Society of Computer and Information
• /
• v.17 no.11
• /
• pp.19-26
• /
• 2012

Reversible lanes in urban intersections is used to efficiently control vehicles, reduce traffic congestion and increase the capacity of a roadway. But by far traffic control systems in urban intersections are simple and manually operated by police officers. In this study, we present a hybrid algorithm that intelligently resolve the moving direction of reversible lanes to efficiently manage the flow of traffic at intersection. The proposed algorithm consists of three stages:(i) fuzzy inference method to get the efficiency of moving direction, (ii) a provisional decision whether to change the reversible lane to different direction, (iii) a final evaluation criterion for changing the directions of the reversible lanes. The fuzzy inference results of efficiency are shown by using matlab application.

• The Korean Journal of Emergency Medical Services
• /
• v.4 no.1
• /
• pp.63-71
• /
• 2000

Exceptive clause of ambulance stated in Road Traffic Laws of ambulance car accidents is not properly applied and emergency staffs who transfer over 85% of emergency cases are to be forced to start out to the emergency field with unstable conditions which they may be punished on the criminal and civil laws. Hereby this study makes the following suggestions to activate the duties of transferring emergency cases by emergency staffs, promote their morale and diminish the victim of emergency staffs due to traffic accidents. 1) It is prescribed that ambulance car drivers should be protected legally by applying the exceptive clauses thoroughly regulated in special case clauses because ambulance cars are used for the purpose of saving the human life. 2) On the traffic accidents occurred during the transfer of emergency cases, the special insurance system is created for treating the ambulance car accidents, not to bind the emergency staff's mistake to traffic law and the victims are compensated by the nation on the basis of insurance system and emergency staffs have the systematic security. 3) On the road over six lanes, emergency lane is set on the center and ambulance car should be used as the exclusive lane. 4) Ambulance car drivers must have the habit of transferring emergency cases rapidly within the range of legal operation.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.5
• /
• pp.311-317
• /
• 2011

The blind spot is an area where drivers visibility does not reach. When drivers change a lane to adjacent lane, they need to give an attention because of the blind spot. If drivers try to change lane without notice of vehicle approaching in the blind spot, it causes a reason to have a car accident. This paper proposes a night-time blind spot vehicle detection using cameras. At nighttime, head-lights are used as characteristics to detect vehicles. Candidates of headlight are selected by high luminance feature and then shape filter and kalman filter are employed to remove other noisy blobs having similar luminance to head-lights. In addition, vehicle position is estimated from detected head-light, using virtual center line represented by approximated the first order linear equation. Experiments show that proposed method has relatively high detection porformance in clear weather independent to the road types, but has not sufficient performance in rainy weather because of various ground reflectors.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.44-52
• /
• 2019

In this study a safety evaluation method is presented for a ADAS vehicle to be tested in collision situation when multiple vehicles are present on a single lane. Test scenarios are developed based on Euro-NCAP assessment scenarios, accident database and related simulation results in previous works. An automated evaluation system that is called as the K-target mover is used for active safety evaluation experiments. The experiments are conducted with two types of tests. First, the rear-end collision tests with 25% and 50% overlap for the test vehicle and target vehicle are conducted with the two kinds of test vehicles. On the other hand, the rear-end collision tests which include multiple vehicles in a single lane with 25% and 50% overlaps, are also conducted. Experimental results show that the test vehicles with ADAS cannot recognize the collision situation sometimes in the developed test scenarios, even in the case that the test vehicle showed stable performance in the simple overlap scenarios.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.4
• /
• pp.335-346
• /
• 2013

AASHTO LRFD and Korean Bridge Design Code (Limit State Design) specify to consider Truck and Lane load simultaneously determined from reliability-based live load model, and impact shall be applied to the truck load while it shall not be applied to the lane load. In this paper, vehicle-bridge interaction analysis under moving truck and lane loads were performed to estimate impact factor of the cables and girders for the selected multi-cable-stayed composite bridges with 230m, 400m and 540m main span. A 6-d.o.f. vehicle was used for truck load and a series of single-axle vehicles was applied to simulate equivalent lane load. The effect of damping ratio on the impact factor was estimated and then the essential parameters to impact factor, i.e., road surface roughness and vehicle speed were considered. The road surface roughness was randomly generated based on ISO 8608 and it was applied to the truck load only in the vehicle-bridge interaction analysis. The impact factors evaluated from dynamic interaction analysis were also compared with those by the influence line method that is currently used in design practice to estimate impact factor in cable-stayed bridge.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.47-56
• /
• 2008

Two-Lane Highway of Korea is important, Because it has the largeest portion of all roads of Korea. But it has only one lane for one direction. So, If Delays are happened by low-speed vehicles, high-speed vehicles should over-take through the other side of the road. This over-takings can generate the high possibility of traffic accidents and the severity of traffic accidents by over-takings is very high. Because it generates a head-on collision. But the level of Service that indicates the operation states of Two-Lane Highway is defined as a conception that explains the operation conditions of traffic safety etc. Whencalculating the Level of service. It is considered by only delays. So, in this paper, first, this author wants to present the calculation of delay-time by Total-Delay Rate. Second, by multiplying this delay-time by the costs of delays wants to present the method of calulates the total delay costs. Third, to consider the traffic accidents, After predicting the number of traffic accidents, As multipling this by the average of costs of traffic accidents. want to present the method to calculate Total traffic accidents costs. Forth, present the operation costs.

• Journal of the Institute of Convergence Signal Processing
• /
• v.17 no.1
• /
• pp.18-25
• /
• 2016

As more people have cars, the threat of traffic accidents is posed on men and women of all ages. The main culprit of traffic accidents is driving while intoxicated or drowsy. The method to recognize and prevent the cause of traffic accidents is to use lane detection. In this study, a total of 4,000 frames (day image: 2,900 frames, night image: 1,100 frames) were used to test lane detection. According to the test, in the case of day image, when the threshold of Sobel edge detection technique was detected with second-order differential equation, there was the highest candidate lane detection rate which was 86.1%. In the threshold of Canny edge detection technique, the highest detection rate of 88.0% was found at Low=50, and High=300. In the case of night image, the threshold of Sobel edge detection technique, when horizontal calculation and vertical calculation had second-order differential equation, and when horizontal-vertical calculation had 1.5th-order differential equation, there was the highest detection rate which was 83.1%. In the threshold of Canny edge detection technique, the highest detection rate of 89.9% was found at Low=50, and High=300.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.3
• /
• pp.255-263
• /
• 2014

Today, a number of CCTV on the highway is to observe the flow of traffics. There have been a number of studies where traffic data (e.g., the speed of vehicles and the amount of traffic on the road) are transferred back to the centralized server so that an appropriate action can be taken. This paper introduces a system that detects the changes of traffic flows caused by an accident or unexpected stopping (i.e., vehicle remains idle) by monitoring each lane separately. The traffic flows of each lane are level spacing curve that shows Wigner distribution for location vector. Applying calogero-moser system and Hamiltonian system, probability equation for each level-spacing curve is derived. The high level of modification of the signal means that the lane is in accident situation. This is different from previous studies in that it does more than looking for the signal from only one lane, now it is able to detect an accident in entire flow of traffic. In process of monitoring traffic flow of each lane, when camera recognizes a shadow of vehicle as a vehicle, it will affect the accident detecting capability. To prevent this from happening, the study introduces how to get rid of such shadow. The system using Basian network method is being compared for capability evaluation of the system of the study. As a result, the system of the study appeared to be better in performance in detecting the modification of traffic flow caused by idle vehicle.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.2
• /
• pp.193-201
• /
• 2010

Purpose : This study achieved to search the effect of the circuit exercise and conventional exercise on walking ability(walking speed, endurance, dynamic balance, speed, endurance and pedestrian crossing) in chronic stroke. Methods : Since is diagnosed by stroke, to 30 chronic stroke patients who more than 1 year past the 15 circuit exercise group, the 15 conventional exercise group random the circuit exercise group applied circuit exercise 3th 8 weeks each week after neurological treatment because assigning and the conventional exercise group executed round trip walk exercise in parallel bar 3th 8 weeks each week after neurological treatment. The data of 25 patients who complete experimental course were statistically analysed. Results : The results of this dissertation were as following : 1) There were significantly increased after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test in circuit exercise group (p<.001). 2) There were significantly increased after experimental of 2, 4 and 6 lane road crossing mobility in Walking circuit exercise group(p<.01). 3) There were significantly differences after experimental of 10 meter walk test, 6 minutes walk test and Timed "Up and Go" test change quantity between circuit exercise group and conventional exercise group(p<.05). 4) There were correlations were found between the TUG test and 2, 4 and 6 lane road (2 lane road; r=.463, p<.01., 4 lane road; r=515, p<.01., 6lane road; r=.710, p<.01), and there were correlations were found between the 10 meter walk test and 6 minutes walk test(r=.595, p<.01), TUG test(r=.662, p<.01) and 6 lane road(r=.527, p<.01). Conclusion : Even if improvement of walk function through training consists in room, transfer of actuality pedestrian crossing is no change outside the room. Because it is much variable of the weather, seasonal factor, temperature, pedestrian number, state of underneath etc. outside the room. Then, in room after direction promotion of walk function to be promotion of walk function in actuality life and need development of connectable training method consider.