• The korean journal of orthodontics
• /
• v.49 no.1
• /
• pp.41-48
• /
• 2019

Objective: This in-vivo study aimed to compare landmark identification errors in anteroposterior (AP) and posteroanterior (PA) cephalograms generated from cone-beam computed tomography (CBCT) scan data in order to examine the feasibility of using AP cephalograms in clinical settings. Methods: AP and PA cephalograms were generated from CBCT scans obtained from 25 adults. Four experienced and four inexperienced examiners were selected depending on their experience levels in analyzing frontal cephalograms. They identified six cephalometric landmarks on AP and PA cephalograms. The errors incurred in positioning the cephalometric landmarks on the AP and PA cephalograms were calculated by using the straight-line distance and the horizontal and vertical components as parameters. Results: Comparison of the landmark identification errors in CBCT-generated frontal cephalograms revealed that landmark-dependent differences were greater than experienceor projection-dependent differences. Comparisons of landmark identification errors in the horizontal and vertical directions revealed larger errors in identification of the crista galli and anterior nasal spine in the vertical direction and the menton in the horizontal direction, in comparison with the other landmarks. Comparison of landmark identification errors between the AP and PA projections in CBCT-generated images revealed a slightly higher error rate in the AP projections, with no inter-examiner differences. Statistical testing of the differences in landmark identification errors between AP and PA cephalograms showed no statistically significant differences for all landmarks. Conclusions: The reproducibility of CBCT-generated AP cephalograms is comparable to that of PA cephalograms; therefore, AP cephalograms can be generated reliably from CBCT scan data in clinical settings.

• Journal of Digital Convergence
• /
• v.17 no.11
• /
• pp.53-59
• /
• 2019

The purpose of this study is to verify what effects regional landmark cognitive factors have on tourist satisfaction and how the effect relationship between regional landmark cognitive factors and tourist satisfaction change due to perception differences between local residents and tourists and to present implications. Analysis results show that landmark cognitive factors could be categorized into the single factors of symbolism, historicity, and tourist satisfaction. Landmark cognitive factors had significant effects on tourist satisfaction and differences occurred in that effect relationship according to local residents and tourists. Therefore, when tourism products are developed through landmarks, if the opinions of local residents are excessively reflected, this can bring about outcomes that actually disregard tourists, so it is important to appropriately reflect various opinions.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.4
• /
• pp.90-104
• /
• 2007

Landmarks like high-rise building are one of the important elements for the enhancement of city identity and provides the hierarchy of city streets, playing a central and symbolic role in cities. Research on physical attribute of landmarks, such as height, distance, location and shape, which are suitable for a city scale, can help a city create a distinct image and maintain comprehensible structure. To achieve this purpose, it is necessary to understand the spatial and cognitive characteristics of a landmark for the establishment and management of it. The results of this study can be summarized as follows: 1. The level of representativeness of a landmark increases in proportion to the degree of cognitive intensity on it. The relation between representativeness and cognitive intensity can be explained as the log-function as follows: Log(the number of people who respond "It has representativeness")=$-1.2579+1.5908{\times}$(cognitive intensity); 2. There are a few differences based on the attributes of respondents: while gender has no distinct influence, residential period and age show statistically meaningful influence on cognitive intensity of a vertical landmark Cognitive intensity of an individual landmarks especially, differs according to the class of main users. Because of frequent changes in occupation or employment, respondents consider the distance from a residential area more important than the distance from a working area in evaluating cognitive intensity of landmarks; 3. landmark can be classified into two kinds: a district landmark and an urban landmark A district landmark is closely connected with physical attributes of the landmark itself, such as distance, size and height. An urban landmark is mainly related to cognitive attributes such as the image and identity of a city as a whole. As a result, the landmark analysis data in this research provides spatial order and identity in a city. It is difficult to establish and reinforce the image of a city as a single element ike a landmark. However, withy steady follow-up research, this study could be seen as a systematic and logical model to improve urban landscape and image.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.47 no.1
• /
• pp.171-190
• /
• 2023

This study aims to develop algorithms for automatic extraction landmarks from the lower body of women aged 20-54 using the Grasshopper programming language, based on 3D scan data in the 8th SizeKorea dataset. First, 11 landmarks were defined using the morphological features of 3D body surfaces and clothing applications, from which automatic landmark extraction algorithms were developed. To verify the accuracy of the algorithm, this study developed an additional algorithm that could automatically measure 16 items, and algorithm-derived measurements and SizeKorea measurements were compared using paired t-test analysis. The statistical differences between the scan-derived measurements and the SizeKorea measurements were compared, with an allowable tolerance of ISO 20685-1:2018. This study found that the algorithm successfully identified most items except for the crotch point and gluteal fold point. In the case of landmarks with significant differences, the algorithms were modified. This study was significant because scan editing, landmark search, and measurement extraction were successfully performed in one interface, and the developed algorithm has a high efficiency and strong adaptability.

• Imaging Science in Dentistry
• /
• v.45 no.1
• /
• pp.15-22
• /
• 2015

Purpose: This study was performed to assess the reproducibility of identifying the sella turcica landmark in a three-dimensional (3D) model by using a new sella-specific landmark reference system. Materials and Methods: Thirty-two cone-beam computed tomographic scans (3D Accuitomo$^{(R)}$ 170, J. Morita, Kyoto, Japan) were retrospectively collected. The 3D data were exported into the Digital Imaging and Communications in Medicine standard and then imported into the Maxilim$^{(R)}$ software (Medicim NV, Sint-Niklaas, Belgium) to create 3D surface models. Five observers identified four osseous landmarks in order to create the reference frame and then identified two sella landmarks. The x, y, and z coordinates of each landmark were exported. The observations were repeated after four weeks. Statistical analysis was performed using the multiple paired t-test with Bonferroni correction (intraobserver precision: p<0.005, interobserver precision: p<0.0011). Results: The intraobserver mean precision of all landmarks was <1 mm. Significant differences were found when comparing the intraobserver precision of each observer (p<0.005). For the sella landmarks, the intraobserver mean precision ranged from $0.43{\pm}0.34mm$ to $0.51{\pm}0.46mm$. The intraobserver reproducibility was generally good. The overall interobserver mean precision was <1 mm. Significant differences between each pair of observers for all anatomical landmarks were found (p<0.0011). The interobserver reproducibility of sella landmarks was good, with >50% precision in locating the landmark within 1 mm. Conclusion: A newly developed reference system offers high precision and reproducibility for sella turcica identification in a 3D model without being based on two-dimensional images derived from 3D data.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.4
• /
• pp.24-32
• /
• 2012

Of many approaches to reduce motion analysis errors, the compensation method of anatomical landmarks estimates the position of anatomical landmarks during motion. The method models the position of anatomical landmarks with joint angle or skin marker displacement using the data of the so-called dynamic calibration in which anatomical landmark positions are calibrated in ad hoc motions. Then the anatomical landmark positions are calibrated in target motions using the model. This study applies the compensation methods with joint angle and skin marker displacement to three lower extremity motions (walking, sit-to-stand/stand-to-sit, and step up/down) in ten healthy males and compares their performance. To compare the performance of the methods, two sets of kinematic variables were calculated using different two marker clusters, and the difference was obtained. Results showed that the compensation method with skin marker displacement had less differences by 30~60% compared to without compensation. And, it had significantly less difference in some kinematic variables (7 of 18) by 25~40% compared to the compensation method with joint angle. This study supports that compensation with skin marker displacement reduced the motion analysis STA errors more reliably than with joint angle in lower extremity motion analysis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.222-232
• /
• 2014

Purpose: This study aims to investigate if 2D analysis method is applicable to analysis of CBCT by comparing measuring points of CBCT with those of Adjusted 2D Lateral Cephalogram (Adj-Ceph) with magnification adjusted to 100% and finding out at which landmarks the difference in position appear. Materials and methods: CBCT data and Adj-Ceph (100% magnification) data from 50 adult patients have been extracted as research objects, and the horizontal (Y axis) and vertical (Z axis) coordinates of landmarks were compared. Landmarks have been categorized into 4 groups by the position and whether they are bilaterally overlapped. Paired t-test was used to compare differences between Adj-Ceph and CBCT. Results: Significant difference was found at 11 landmarks including Group B (S, Ar, Ba, PNS), Group C (Po, Or, Hinge axis, Go) and Group D (U1RP, U6CP, L6CP) in the horizontal (Y) axis while all the landmarks in vertical (Z) axis showed significant difference (P<.05). As a result of landmark difference analysis, a meaningful difference with more than 1 mm at 13 landmarks were indentifed in the horizontal axis. In the vertical axis, significant difference over 1 mm was detected from every landmark except Sella. Conclusion: Using the conventional lateral cephalometric measurements on CBCT is insufficient. A new 3D analysis or a modified 2D analysis adjusted on 19 landmarks of the vertical axis and 13 of the horizontal axis are needed when implementing CBCT diagnosis.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.14 no.2
• /
• pp.1-15
• /
• 2008

Purpose : This survey was to investigate on the effect of each region changed in trunk through sagittal plane after Trunk Flexion-Extension Exercise. Methods : 18 students of Gimcheon College participated in this study for the period of July 9-30, 2007. Analyzed factor were 1) degree of pain 2) presence of Gillet test and 3) difference of right-left for 7 landmark region in trunk applying I.B.S.-2000 after Trunk Flexion - Extension Exercise. We used the SPSS $PC^+$ program for classifying into analysis of frequency, $x^2$-test, t-test and Simple Linear Regression analysis test. Results: Followings are concluded For degree of pain, 13(72.2%) of students answered "No pain" after Trunk Flexion-Extension Exercise and in the result 4 more students decreased the pain. In the Gillet test, 14(77.8%) of students answered "positive" after Trunk Flexion-Extension Exercise and in the result 4 more students increased mobility of Sacroiliac joint. In the differences of right-left for 7 landmark region in trunk by B.M.I. scale, Slim type was decreased both Acromion(0.45mm), both Iliac crest(0.44mm), and both ASIS(0.31mm) to anterior plane, Normal type was decreased both inferior angle of Scapular(0.02mm), both L4-5(0.07mm), and both PSIS(0.09mm) to posterior plane Fatness type was decrease both Acromion(0.05mm), both ASIS(0.05mm) to anterior plane. In the differences of right-left for 7 landmark region in trunk for degree of pain No pain group was decreased both Acromion(0.17mm), both Nipple(0.25mm) to anterior plane and both PSIS(0.13mm) to posterior plane Pain group was decreased both Acromion(0.04mm), both Iliac creast(0.03mm) to anterior plane and both inferior angle of Scapular(0.18mm) both PSIS(0.13mm) to posterior plane. In the difference of right-left for 7 landmark region in trunk for each of the exercises, Both iliac crest(0.1mm), both ASIS(0.12mm) to anterior plane were decreased after Flexion Trunk Exercise. Both acromion(0.27mm) to anterior plane, both inferior angle of scapular(0.14mm) and both PSIS(0.12mm) to posterior plane were decreased after Extension Trunk Exercise. Each of the exercises, The both inferior angle of Scapular showed high scores($0.65{\pm}0.23$) at Trunk Extension Exercise group and there was statistical significance between Trunk Flexion Exercise group and Extension exercise group(t :-2.502, p < 0.05). 7. At Pre-exercise group, Both inferior angle of Scapular showed low scores($0.23{\pm}8.27$) at Trunk Extension Exercise group and there was statistical significance between Pre- Exercise group and Trunk Extension Exercise group(t :-2.5430, p<0.05). Conclusion : The simple linear regression analysis was presented at Acromion(-0.243), L4-5(-0.753), PSIS(0.576) and there was statistical significance in BMI scale(p<0.01).

• Proceedings of the National Institute of Ecology of the Republic of Korea
• /
• v.3 no.1
• /
• pp.32-40
• /
• 2022

The trade-off between morphology and physical function may vary according to ecological traits. Taking a quantitative approach, we attempted to analyze the differences in the skeletal shape of the lower body and limbs in relation to the ecological traits of four anuran species (Dryophytes japonicus, Glandirana rugosa, Pelophylax nigromaculatus, and Lithobates catesbeianus) occurring in South Korea. Body size, locomotor mode, microhabitat, trophic positions, and predator defense mechanisms were selected for the ecological traits of the anurans. The pelvis, ilium, and urostyle, which are associated with locomotor performance, were selected for the skeletal shape of the lower body. The ratio of limbs, which is related to locomotor mode and microhabitat, was confirmed by analyzing the skeletons of the forelimbs (radio-ulnar and humerus) and hindlimbs (femur and tibiofibular). Both landmark-based geometric morphometrics and traditional methods were used for skeletal shape comparison. The skeletal shape of the lower body was completely different among the four species, whereas the ratio of the limbs was only different in D. japonicus. The skeletal shape of the lower body may be related to body mass and predator defense mechanisms, whereas the ratio of the limbs was related to the locomotor mode and microhabitat. Quantifying these morphological differences among various species can help elucidate the mechanisms of behavioral and morphological changes in response to ecological effects.

• The Journal of the Korea Contents Association
• /
• v.13 no.7
• /
• pp.417-431
• /
• 2013

During the development process of mega-project, individual buildings including skyscrapers are built following the master plan. It is not a difficult thing to see the gap of standpoint between the urban planners and architects on the project. This study aims to analyze the difference between architect and urban planner's point of view in evaluating international design competition works which the internationally distinguished honorable design companies(SOM, Jerde Partnership, Studio Daniel Libeskind, Foster+Partners and Asymptote Architecture) submitted as the ideas of Yongsan International Business District Design. Furthermore, we made an attempt to quantify the weight of each factors of urban design by each group. Architect and urban planner's viewpoint were revealed with seven architects and seven urban planners evaluating the international design competition works through AHP(Analytical Hierarchy Process). AHP structure was made of two step hierarchy in terms of Master Plan and Landmark Tower. Eight evaluation criteria were set up such as the concept, land use, transportation, feasibility of Master Plan and the concept, location, functional efficiency and aesthetic beauty of Landmark Tower. Results show that Architect have different point of view from that of urban planner. While the architect's weight of evaluation criteria is on the Landmark Tower(0.505), urban planner's weight is on Master Plan(0.642). Feasibility, the location of Landmark Tower and land-use are very important evaluation criteria to architect and urban planner in common. Functional efficiency of Landmark Tower is in architect's favour and transportation is in urban planner.