• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2005.05a
• /
• pp.669-673
• /
• 2005

HID 램프란 High Intensity Discharge Lamps의 약어로서 고압 방전램프라 하고, 대규모 공간의 조명이 필요한 공공시설, 산업시설, 상업시설 이외에 스포츠 시설 등 폭넓은 용도에 대응하고 있다. HID 램프는 부성저항 특성으로 인하여 직접 전원에 접속하기 때문에 램프 전류가 흐르게 되면 급격히 전류가 증가하여 전류의 흐름이 매우 불안하게 된다. 따라서 이것을 안정시키기 위하여 전원과 램프사이에 전류 제한장치인 안정기(Ballast)로 램프전류를 적절하게 제어할 필요가 있다. 본 고에서는 안정기를 구성하는 구성 재료와 부품이 사용 중에 주로 영향을 받는 것으로 생각되는 열화요인과 이에 대한 수명의 관계를 중심으로 안정기의 수명에 대해서 논하고자 한다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.237-240
• /
• 2002

A CCFL model for high frequency dimming electronic ballast simulation is presented in this paper. The model can be utilized for an electronic ballast simulation with continuous dimming and transient mode simulation such as step dimming. The piezoelectric transformer Is evaluated using an AC analysis. The electronic ballast composed of piezoelectric transformers and ZVS inverter was implemented. It enables a fluorescent lamp to be fumed on stably. Simulation of a high frequency electronic ballast which operates a fluorescent Imp at high frequency is proposed. Simulation is carried out using PSPICE program to illustrate the performance of the circuit

• 한국디지털정책학회:학술대회논문집
• /
• 2003.12a
• /
• pp.275-289
• /
• 2003

Most of companies related to the area of B2B electronic commerce are making their efforts to innovate their existing business process into new designed supply chain process. eSCM system using XML/EDI has potential to impact on reshaping the relationship between traditional trading partners. This study intends to suggest a prototype of eSCM system using XML/EDI. To implement eSCM system, we analyze and design the supply chain process by using Unified Modeling Language, with a firm, which is a first vendor to produce LAMP, engaged in Korean automobile industry.

• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.2537-2540
• /
• 2001

The purpose of this study is to examine the calculated method of loss characteristics of full-bridge eletronic ballast for 250Watt HID lamps by approximated modeling. These lamps have the most emit effiency and color rendering. Especially, the majority of losses appear to the MOSFET do full-bridge, L of output terminal and driver IC, besides losses occur to the R in the ballast. These losses cause heating and breakage of MOSFET. When HID-lamp arrivals the steady-state, loss of ballast is measured 9% and analyzed value is 8% approximately. Accordingly it is not too much to say that greater part of losses is examined.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.1
• /
• pp.7-18
• /
• 2006

This study aims to analyze the illumination effects of bridges across the Han River. For the purpose, 8 bridges were selected. Field survey and measurements were performed, and the physical values such as luminance, color temperature and chromaticity were measured by Radiant Imaging Prometric 1400 Color. The results of the study are as follows; (1) Metal halide lamp, sodium lamp and LED(Light Emitting Diode) of various colors, are used in illuminating the bridges and create color contrasts and color changing by color filters. (2) Luminance contrast of the illuminated bridges affects 'modeling' and 'spare sense' of bridges, and it might improve people's preference and impression. (3) Color temperature of the illuminated bridges is influenced by 'color of bridge', 'material of bridge' and, 'color temperature and color of light sources'. (4) 'Structure of bridges' and 'luminaires' influence on the physical feature of the bridges. Especially, illumination of the bridges shows resemblant patterns by 'structure of bridges'.

• The Journal of Society for e-Business Studies
• /
• v.9 no.3
• /
• pp.207-226
• /
• 2004

SCM is one of the important key issues in Internet-based business environment. Most of companies related to B2B electronic commerce are making their efforts to innovate their existing business process into new integrated supply chain process. SCM system using XML/EDI provides competitive advantage to them by reshaping the relationship between traditional trading partners. This study intends to suggest a prototype of SCM system using XML/EDI. To implement SCM system, we analyze and design the supply chain process by using Unified Modeling Language, with a firm engaged in Korean automobile industry, which is a first vendor to produce a set of LAMP. The implementation of SCM system using UML shows excellent performance in software reuse, extensibility, and the interoperability with corporate internal information systems.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.5
• /
• pp.31-40
• /
• 2017

The aim of this study is to estimate net irrigation requirements for red pepper during growing period using soil moisture model. The soil moisture model based on water balance approach simulates soil moisture contents of 4 soil layers in crop root zone considering soil moisture extraction pattern. The LAMP (Land-Atmosphere Modeling Package) high resolution meteorological data provided from National Center for AgroMeteorology (NCAM) was used to simulate soil moisture as the input weather data. Study area for the LAMP data and soil moisture simulation covers $36.92^{\circ}{\sim}37.40^{\circ}$ in latitude and $127.36^{\circ}{\sim}127.94^{\circ}$ in longitude. Soil moisture was monitored using FDR (Frequency Domain Reflectometry) sensors and the data were used to validate the simulation model from May 24 to October 20 in 2016. The results showed spatially detailed soil moisture pattern under different weather conditions and soil texture. Net irrigation requirements were also different by location reflecting the spatially distributed weather condition. The average of the requirements was 470.7 mm and averages about soil texture were 466.8 mm, 482.4 mm, 456.0 mm, 481.7 mm, and 465.6 mm for clay loam, sandy loam, silty clay loam, clay, and sand respectively. This study showed spatial differences of soil moisture and the irrigation requirements of red pepper about spatially uneven weather condition and soil texture. From the results, it was demonstrated that high resolution meteorological data could provide an opportunity of spatially different crop water requirement estimation during the irrigation management.

• Transactions on Electrical and Electronic Materials
• /
• v.11 no.3
• /
• pp.138-144
• /
• 2010

Optical analysis is necessary to optimize light emitting diode (LED) safety street lighting. In this study, optical analysis was conducted for 100 W LED safety street lighting. Experimental research on such a single LED was the first undertaken. Simulation modeling based on the optical properties of the single LED has compared between average road illuminances and has them analyzed with Korean Industrial Standards for LED safety street lighting (KS C7658:2009). The simulation results demonstrated that the illumination performance (average road illuminance) was 75.3 lx at a height of 4 m and an area of $32\;m^2$, 45.25 lx at a height of 5 m and an area of $72\;m^2$, and 30.05 lx at a height of 6 m and an area of $128\;m^2$. 100 W safety street lighting (model CE180-ST-OS) designed by simulation was also compared between product and 100 W simulation modeling, and error rates averaged 5.6%. The 100 W LED safety street lighting base designed in simulation modeling was proven by comparison experiments. Through the simulations and the corresponding analysis, it was found that the tested 100 W LED safety street lamp had reasonable performance. The design method for LED safety street lamps has been summarized based on the optical analysis.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.4
• /
• pp.337-345
• /
• 2022

For data such as rainfall and soil moisture, it is important to obtain the values of all points required as geostatistical data. Spatial interpolation is generally performed in this process, and commercial software such as ArcGIS is often used. However, commercial software has fatal drawbacks due to its high expertise and cost. In this study, R, an open source-based environment with ArcGIS, a commercial software, was used to compare the differences according to the processing environment when performing spatial interpolation. The data for spatial interpolation was weather forecast data calculated through Land-Atmosphere Modeling Package (LAMP)-WRF model, and soil moisture data calculated for each cumulative rainfall scenario. There was no difference in the output value in the two environments, but there was a difference in user interface and calculation time. The results of spatial interpolation work in the test bed showed that the average time required for R was 5 hours and 1 minute, and for ArcGIS, the average time required was 4 hours and 40 minutes, respectively, showing a difference of 7.5%. The results of this study are meaningful in that researchers can derive the same results in a commercial software environment and an open source-based environment, and can choose according to the researcher's environment and level.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.43 no.6 s.312
• /
• pp.46-56
• /
• 2006

In this paper, we propose an improved reproduction algorithm for a realistic image of the real scene based on the optical characteristics of the light sources and the materials at the lighting environment. This paper is continuation of the previous study to improve the modeling method of the light sources and the materials and apply this to the real rear lamp of automobile. The backward ray tracing method is first used to trace the light ray from a light source, and also considers the physical characteristics of object surfaces and geometric properties of light radiation to estimate accurately the light energy incoming toward to human eyes. For experiments and verification of the proposed method, the simulation results are compared with the measured light stimuli. Accordingly, the simulation results show that the proposed algorithm can estimate light energy well and reproduce the visually similar image with a scene incident on a sight of viewer.