• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.39 no.2
• /
• pp.85-93
• /
• 2006

This study was conducted to evaluate the optimal processing conditions of smoke-dried powdered oysters and to determine their shelf-life during storage for development of a natural oyster flavoring substance. The optimal conditions for processing of smoke-dried oyster powder with freshy oyster were as follows. Raw shelled oysters were rinsed with 3% saline solution, drained, boiled for 10 minutes at $98^{\circ}C$, and then smoked for 1 hour at $50^{\circ}C$, followed by drying for 4 hours at $80^{\circ}C$ Smoke-dried oyster powder with oyster scraps were prepared as flavoring material. The smoked oyster scraps were submerged in oyster sauce far 10 minutes at room temperature and then dried with hot air for 5 hours at $50^{\circ}C$. The smoke-dried oysters and smoke-dried oyster scraps were then pulverized to 50 mesh and packed in tea bags or vacuum-packed in laminated plastic film bags (PE/PVDC/CPP, $12{\mu}m/15{\mu}m/50{\mu}m$). Compared to non smoke-dried powdered oysters, the smoking and dipping in oyster sauce enhanced the flavor and prevented lipid oxidation of the smoke-dried powdered oyster product. Shelf-life tests indicated that the vacuum-packaging method preserved the quality of smoke-dried powdered oysters stored for 150 days at room temperature.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.6
• /
• pp.562-570
• /
• 2019

To develop natural-tasting fish paste from the pufferfish Lagocephalus wheeleri, steamed pufferfish paste (SPP) was prepared and its optimal processing conditions, quality metrics, and shelf-life characteristics were examined. SPP was produced by thawing golden threadfin Nemipterus virgatus surimi (FA grade), then adding 10% unwashed pufferfish surimi (PS), 1.5% salt, 8.0% wheat starch, 0.25% calcium carbonate, 0.25% sugar, 0.75% sorbitol, 0.25% polyphosphate, and 12.0% pufferfish hot-water extract (Brix 10°). The meat was ground with a Stephan mixer, molded at low temperature (18℃, 10 h), vacuum packed in a laminated plastic film bag, heat treated with hot water (95℃, 50 min), and cooled. As the amount of PS added increased, the whiteness, gel strength, and shear strength of the SPP decreased slightly. However, the SPP folding test showed no deterioration in the texture. In the sensory evaluation, the SPP received a higher rating for taste, smell, and overall taste than commercial Japanese pufferfish Kamaboko. The total amino acid content of the SPP was 10,262.6 mg/100 g; the major amino acids were aspartic acid, glutamic acid, alanine, valine, leucine, lysine, and arginine. The free amino acid content was 133.0 mg/100 g; the major amino acids were taurine, glutamic acid, glycine, alanine, cystine, and lysine.

• Journal of Life Science
• /
• v.9 no.1
• /
• pp.44-49
• /
• 1999

A study was conducted to investigate the possibility of processing seasoned and semi-dried right-eyed flounder (Pseudopleuronects herzensteini) and to examine its quality during storage at $\pm$$3^{\circ}C$ by analyzing the factors such as moisture content, pH, volatile basic nitrogen (VBN), viable cell count and peroxide value (POV). For processing of the seasoned and semi-dried product, optimum conditions of drying temperature and drying time were $20^{\circ}C$ and 4 hrs, respectively, under 50$\pm$5$\%$ of relative humidity and 2 m/sec of air blast speed. The shelf-lives of the products by vacuum-packaging method in nylon/polyethylene/linear low density polyethylene (0.015/0.045/0.040 mm) laminated film bag were 35 and 16 days during storage at $-3^{\circ}C$ and $3^{\circ}C$, respectively.

• Journal of the Korean Society of Costume
• /
• v.57 no.8
• /
• pp.14-23
• /
• 2007

The purpose of this study was to investigate the present condition of cold protective clothing for mailman, to improve its design in movement, fitness, and other functions, and supply basic data for its performance evaluation. The results are as follows : The 46.60% of those questioned did not satisfy current clod protective clothing fer mailman. Especially, they considered dissatisfactory in properties such as waterproof, comfort, activity, and sweat absorption. The newly developed cold protective clothing is two-piece style composed of jacket and pants. Both jacket and pants are composed of inner and outer clothing individually. In both jacket and pants, their outer clothing's material was waterproof, windproof, and breathable shell fabric on which PTFE film laminated and their inner clothing's material was 100% polyester Polar polis to have better insulation property. The jacket has attachable cap which can be used as rain gear and set-in sleeve with stand collar. It also had big outside patch pockets and side seam pockets to ensure enough storage space. The pants have knee pads to give free movement to knees and slant side pockets. Inner clothing of both jacket and pants can be worn during working inside without out clothing. Insulation of the newly developed cold protective clothing was not better than current one except right hand, left hand and left foo. It is considered that is because thickness of material is the most important factor to influence insulation.

• Journal of Practical Engineering Education
• /
• v.6 no.2
• /
• pp.105-110
• /
• 2014

In this work, mechanical characteristics of titanium diaphragm have been studied as a potential robust substrate and a diaphragm material for automotive tire pressure sensor. Lamination process techniques combined with traditional micromachining processes have been adopted as suitable fabrication technologies. To illustrate these principles, capacitive pressure sensors based on titanium diaphragm have been designed, fabricated and characterized. The fabrication process for micromachined titanium devices keeps the membrane and substrate being at the environment of 20 MPa pressure and $200^{\circ}C$ for a half hour and then subsequently cooled to $24^{\circ}C$. Each sensor uses a stainless steel substrate, a laminated titanium film as a suspended movable plate and a fixed, surface micromachined back electrode of electroplated nickel. The finite element method is adopted to investigate residual stresses formed in the process. Besides, out-of-plane deflections are calculated under pressures on the diaphragm. The sensitivity of the fabricated device is $9.45ppm\;kPa^{-1}$ with a net capacitance change of 0.18 pF over a range 0-210 kPa.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.597-598
• /
• 2005

Recently, the performance of portable electric equipment can often improved by a Li-ion battery assisted by a supercapacitor. A supercapacitor can provide high power density as well as a low resistance in the hybrid system. In this study, we have prepared, as the pluse power souce, a commercially supplied Li-ion battery with a capacity of 700mAh and AC resistivity of $60m\Omega$ at 1kHz and nonaqeous asymmetric hybrid capacitor composed of an activated carbon cathode and MCMB anode, and have examined the electrochemical characteristics of hybrid capacitor and the pulse performances of parallel connected battery/hybrid capacitor source. The nonaqueous asymmetric hybrid capacitor, the stacks of 10 pairs of the cathode, the porous separator and the anode electrode were housed in Al-laminated film cell. The hybrid capacitor, which was charged and discharged at a constant current at $0.25mA/cm^2$ between 3 and 4.3V, has exhibited the capacitance of 100F. And the equivalent series resistance was $32m\Omega$ at 1kHz. By combining a Li-ion battery and a hybrid capacitor, the pulse performance of battery can be improved 23% in run time under a pulse discharge of 7C-rate.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.6
• /
• pp.632-639
• /
• 2018

To develop the high-value added seafood products from a regional speciality seafood, the seasoned dried pen shell Atrina pectinata adductor (SDPA) and seasoned smoke-dried pen shell adductor (SSPA) samples were prepared, and their optimal processing conditions, quality metrics, and shelf-life characteristics were examined. SDPA and SSPA samples were produced by thawing of frozen pen shell adductor, and cutting it into 6-7 mm slices, hot-air drying ($60^{\circ}C$, 20 min) or smoking ($110^{\circ}C$, 20 min), seasoning ($4^{\circ}C$, 12 h) with seasoning powder (60% sorbitol, 15% sucrose, 16% salt and 9.0% monosodium glutamate), hot-air drying ($60^{\circ}C$, 3 h), torching, vacuum-packaging in a laminated plastic film bag, heat treating with hot-water ($85^{\circ}C$, 15 min), and cooling. The moisture content of SDPA and SSPA samples was 44.5 and 43.0%, respectively, and the water activity was 0.845 and 0.842. The total amino acids in SDPA and SSPA samples were 20,986.8 and 21,312.4 mg/100 g, respectively, and the major amino acids in both products were aspartic acid, serine, glutamic acid, proline, glycine, alanine, valine, leucine, phenylalanine, lysine and arginine. The primary minerals were Na, S, K and P. Incubating tests indicated that the quality of SDPA and SSPA samples was maintained for 30 days of storage.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.224-229
• /
• 2001

This study was carried out to examine the quality stability of powdered soup using powder from oyster wash water (PSW). To compare the quality stability, powdered soup from oyster hot-water extracts (PSE) was also prepared by mixing hot-water extract powder (15 g), table salt (5 g), cream powder (19 g), milk replacer (12 g), wheat flour (20 g), corn flour (15 g), starch (5 g), glucose (7.5 g), and onion powder (1.5 g). In preparing PSW, powder from oyster wash water, instead of powder from oyster hot-water extracts, was added and other additives were the same proportion as PSE. The PSW and PSE were packed with laminated film bag (OPP,$20\;{\mu}m$; PE, $20{\mu}m$; paper, $45\;g/m^3$; PE, $20\;{\mu}m$; Al, $7\;{\mu}m$; PE, $20\;{\mu}m$), and then stored at ambient temperature for 12 months. The moisture content, water activity, peroxide value, and fatty acid composition showed little changes during storage of the PSW, The pH, volatile basic nitrogen content, and brown pigment formation increased slightly, while white index decreased slightly during storage of PSW. No significant difference was observed in the changes of food components between PSW and PSE during storage. According to a sensory evaluation, the change in quality of PSW was negligible during 12 months of storage. From the results of the chemical experiment and sensory evaluation, PSW packed with laminated film bag (OPP, $20\;{\mu}m$; PE, $20\;{\mu}m$; paper, $45\;g/{\mu}m$; PE, $20\;{\mu}m$) was revealed to be preserved in good quality during 12 months of storage.

• Journal of the Korean Chemical Society
• /
• v.23 no.5
• /
• pp.329-337
• /
• 1979

The water-vapour transmission ratios (WVTR) of the various commercial polymer films have been investigated at the constant pressure and relative humidity (RH). Water proofnesses, the reciprocals of WVTR for the various samples, were determined using a cup device and maintaining the sample films at a constant temperature ($40{\pm}1^{\circ}C$) and a constant R. H ($90{\pm}2%$) for 24 hours. The following order of the relative proofness was observed; oriented polypropyrene (O.PP) > high density polyethylene (HDPE, Inflation) > high density polyethylene (HDPE. T-die) > casted polypropylene (C. PP) > nonoriented polyester (N. PET) > low density polyethylene (LDPE) > oriented polyester (O. PET) > rigid polyvinyl chloride (Rigid PVC) > semirigid polyvinyl chloride (Semirigid PVC) > nonrigid polyvinyl chloride (Nonrigid PVC) > oriented nylon (O. Nylon) > nonoriented nylon (N. Nylon). And water proofness order was also observed to decrease with the temperature rising; HDPE (T-die) > C. PP > O. PET > LDPE > O. Nylon. The activation energies of LDPE, HDPE (T-die), C. PP, O. PET and O.Nylon films were 12.0, 11.1, 11.4, 11.7, 14.1 kcal/mole, respectively. The WVTR's of the films were increased with the polarity of polymer and the addition of plasticizer in PVC, decreased with the increase of the film thickness and mechanical orientation. The WVTR's of the laminated films O. PP/LDPE, N.Nylon/LDPE, C.PP/LDPE were also more dependent on the film thickness than the WVTR's of the single films.

• Korean Journal of Food Science and Technology
• /
• v.20 no.1
• /
• pp.6-12
• /
• 1988

To improve the individual packaging method and extend the shelf life of mackerel (Scomber japonicus), salted and unsalted mackerel fillets were packaged in laminated plastic film bag (Nylon/PE: $20{\mu}m/40{\mu}m,\;12{\times}15$ cm) filled with $CO_2$ gas, in vacuum, and stored at O and/or $5^{\circ}C$. The other samples were packaged in plastic foam trays, overwrapped with oxygen permeable film (control), and stored at same temperature. Volatile basic nitrogen (VBN), trimethylamine (TMA), histamine (HM) and viable cell counts (VCC) were progressed with the increasing of storage time, but thiobarbituric acid (TBA) values decreased gradually after reaching at a maximum peak in 5-9 days. Judging from 4 chemical components, VBN was the most available component in quality judgement of mackerel fillets and its upper limiting content was 25 mg%. Regression equation for shelf life prediction of mackerel fillets with sensory evaluation and VBN component was determined.