• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2000년도 봄 학술발표회논문집
• /
• pp.230-237
• /
• 2000

The purpose of this study is to evaluate the dynamic behavior of highway bridge due to moving vehicle load, considering the effect of laminated rubber bearing. Dynamic behaviors of bridge considering the effect of bearings are studied with 3-dimensional bridge and vehicle models. To analyze the effect of bearings on the dynamic behaviors of superstructures of bridges, laminated rubber bearing is modeled as 3-dimensional frame element with equivalent stiffness and damping, and the models are included in the bridge analysis model. The results from the analytical models with laminated rubber bearing show a significant effects on dynamic responses and more complex vibration characteristics compared with the results from the bridge with pot bearings. Generally, larger dynamic amplification factors are obtained in the case of laminated rubber bearing, which is mainly due to the smaller torsional stiffness of the bridge with laminated rubber bearing. It can be recommended that were careful consideration on the vibration of bridges and dynamic load allowance in design are needed when adopting laminated rubber bearing.

• Steel and Composite Structures
• /
• 제26권6호
• /
• pp.733-743
• /
• 2018

This paper presents post-buckling responses of a simply supported laminated composite beam subjected to a non-follower axially compression loads. In the nonlinear kinematic model of the laminated beam, total Lagrangian approach is used in conjunction with the Timoshenko beam theory. In the solution of the nonlinear problem, incremental displacement-based finite element method is used with Newton-Raphson iteration method. There is no restriction on the magnitudes of deflections and rotations in contradistinction to von-Karman strain displacement relations of the beam. The distinctive feature of this study is post-buckling analysis of Timoshenko Laminated beams full geometric non-linearity and by using finite element method. The effects of the fibber orientation angles and the stacking sequence of laminates on the post-buckling deflections, configurations and stresses of the composite laminated beam are illustrated and discussed in the numerical results. Numerical results show that the above-mentioned effects play a very important role on the post-buckling responses of the laminated composite beams.

• 복합신소재구조학회 논문집
• /
• 제3권4호
• /
• pp.17-26
• /
• 2012

This study presents a governing equations of bending behavior of anisotropic sandwich plates with multi-layered laminated composite faces. Based on zig-zag models for through thickness deformations, the shear deformation of composite faces is included. All edges of plate are assumed to be simply supported. Results of the bending analysis under lateral loads are presented for the influence of various lay up sequences of antisymmetric angle-ply laminated faces. The accuracy of the approach is ascertained by comparing solutions from the sandwich plates theory with composite faces to the laminated plates theory. Since the present analysis considers the bending stiffness of the core and also the transverse shear deformations of the laminated faces, the proposed method showed higher than that calculated according to the general laminated plates theory. The information presented might be useful to design sandwich plates structure with polymer matrix composite faces.

• 전기의세계
• /
• 제17권4호
• /
• pp.13-17
• /
• 1968

Up to the present time, laminated insulators have been used for the insulation of electrical apparatus. The reason to use laminated insulators is based on the fact that electrical break-down voltage depends on the weak spot theory. If thin insulators are laminated, the weak spot existence probability across the electrodes decreases according to the number of lamination. In this test, the effect of the number of lamination and the thickness of each lamination sheets on their break-down voltage are discussed. The results taken as a whole indicate; (1) The break-down voltage of laminated insulators composed of thin sheets are higher than those of thick sheets, however, the voltage may become the same beyond any definite thickness of laminated insulators. (2) When the lamination sheets becomes thinner, the variation of break-down voltage is great according to the number of lamination sheets. (3) It may by effective to use laminated insulators even when the insulators are aparted from the electrodes.

• 전기의세계
• /
• 제14권5호
• /
• pp.15-19
• /
• 1965

Laminated insulators are largely used in the insulation of electric apparatus. This reason is based on the fact that the solid state insulators meet to electrical break-down by the weak spot theory. Thus the break-down voltage of the laminated insulators are generally affected by the density, distribution and the form of the weakspot contained in the each laminated thin insulator. In this experiment the effects of the characterics of weak spots are not studied, but the effects of the number of lamination and the pressure applied on the laminated insulator on its break-down voltage are investigated experimentaly, and got some interesting results which are reparted as follows.

• Steel and Composite Structures
• /
• 제12권6호
• /
• pp.541-548
• /
• 2012

This paper deals with the applicability of extended layerwise optimization method (ELOM) for frequency optimization of laminated composite plates. The design objective is the maximization of the fundamental frequency of the laminated plates. The fibre orientations in the layers are considered as design variables. The first order shear deformation theory (FSDT) is used for the finite element solution of the laminates. Finally, the numerical analysis is carried out to show the applicability of extended layerwise optimization algorithm of laminated plates for different parameters such as plate aspect ratios and boundary conditions.

• 한국물환경학회지
• /
• 제20권2호
• /
• pp.163-169
• /
• 2004

Feasibility of using PE sheet laminated CSP(Corrugated steel pipe) to sewers were tested via corrosion and abrasion tests for PE sheet laminated CSP; 1) corrosion test for PE film and PE coated plate, 2) corrosion test for joint of PE sheet laminated CSP, 3) corrosion test for outside of PE sheet laminated CSP, and 4) abrasion test for inside of PE sheet laminated CSP. The results for the corrosion and abrasion tests are as follows. 1. Results for corrosion tests on PE films and zinc coated steel plates that were coated with PE films show that the surfaces of both PE were not changed compared to those of original PE samples. Furthermore, PE films maintained strong adhesion on the steel plates even though they were exposed to sewage and seawater provided cutting planes of the steel plates were treated with molding. But, results for corrosion tests on the spots that were previously cut off by a knife and a cutting planes of the steel plates were treated without molding show that steel plates have been corroded if they were exposed to sewage and seawater. 2. Results for corrosion tests on joints of PE sheet laminated corrugated steel using sewage show that gathering rust was observed at cutting plane of PE sheet laminated corrugated steel after 180 days, but PE film was not flaked off. However, PE film at cutting plane was flaked off when PE sheet laminated corrugated steel was exposed to seawater. Furthermore, flaking process was severely progressed at lockseam points of which the surfaces were not smooth. 3. Results for laying PE sheet laminated corrugated steel under the ground show that the surface of untouched PE film was almost identical to that of original PE film. However, the spots that were previously cut off by a knife and a cutting plane of PE sheet laminated corrugated steel have flaked off. 4. As a result of abrasion tests conducted with PE sheet laminated corrugated steel and sand, brilliance and thickness of PE was not greatly changed under the severe abrasion conditions. Therefore, the durability of PE sheet laminated corrugated steel for abrasion was determined to be good.

• 한국정밀공학회지
• /
• 제20권7호
• /
• pp.63-69
• /
• 2003

Through the previous works, it was found that the laminated grinding wheel is more efficient to generate smoother surface in short time than general grinding wheels. But, if the laminated grinding wheel is easily worn-out, it is impossible to apply this wheel in the real grinding process, because the periodic time for dressing is closely linked to the productivity of the process. So, it is required to investigate the wear of the laminated grinding wheel fer studying the periodic time for dressing. But it is difficult to analyze the dressing period quantitavely. Therefore, in this study, periodic times for dressing of the laminated grinding wheel and general grinding wheel are deduced from the relationship between the wear of grinding wheels and the surface roughness changes according to the number of traverse in cylindrical traverse grinding through experiments. This study shows that there are some differences in the wheel wear mechanisms between the general and laminated grinding wheels. As a result, it is also found that the periodic time for dressing of the laminated grinding wheel is longer than that of the general grinding wheel.

• 한국공간구조학회논문집
• /
• 제1권2호
• /
• pp.85-92
• /
• 2001

The structural behaviors of anisotropic laminated shells are quite different from that of isotropic shells, Also, the classical theory of shells based on neglecting transverse shear deformation is invalid for laminated shells. Thus, to obtain the more exact behavior of laminated shells, effects of shear deformation should be considered in the analysis. As the length of x-axis or y-axis is increase, the effects of transverse shear deformation are decrease because the stiffness for the axis according to the increasing of length is large gradually. In this paper, the governing equations for anisotropic laminated shallow shell including the effects of shear deformation are derived. And then, by using Navier's solutions for shallow shells having simple supported boundary, extensive numerical studies for anisotropic laminated shallow shells were made to investigate the effects of shear deformation for 3 typical shells. Also, static analysis is carried out for cross-ply laminated shells considering the effects of various geometrical parameters, e,g., the shallowness ratio, the thickness ratio and the ratio of a(length of x-axis)-to-b(length of y-axis). The results are compared with existed one and show good agreement.

• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.5-11
• /
• 2002

Active vibration control of intelligent laminated composite plates is performed experimental1y Laminated composite place is modeled by the system identification method. For the system identification process, the laminated composite place is excited by two piezoelectric actuators with PRBS signals. At the same time, the displacement of the laminated composite plate is measured by a gap sensor. From these excited PRBS signals and the measured displacement sequence, system parameters of the laminated composite plate are estimated using a recursive prediction error method. Model of the laminated composite plate with two piezoeletric actuators is assumed to be the form of ARMAX. From the estimated ARHMAX model, a state space equation of the observable canonical form is obtained. With this state space equation, a controller and an observer for active vibration control is designed using the optimal control method. Controller and observer are implemented on a digital system. Experiments on the vibration control are Performed with changing the outer layer fiber orientation of intelligent composite plates.