• 한국재료학회지
• /
• 제13권6호
• /
• pp.381-388
• /
• 2003

Directional solidification experiments were carried out at 0.5-150 $\mu\textrm{m}$/s in the Co-base superalloy ECY 768. As increasing solidification rate, the dendrite length increased and it reached the maximum at 150 $\mu\textrm{m}$/s, where the tip temperature is close to the liquidus. The liquidus and eutectic temperatures could be estimated by comparing the dendrite lengths and the temperature gradients at the solid/liquid interface and those were estimated as $1424.6^{\circ}C$ and $1343^{\circ}C$ respectively. Between the dendrites just below final freezing temperature, MC carbide and $M_{23}$$C_{6}$ carbide were found. It was confirmed that the script or blocky shape was Ta or W-rich MC carbide, and the lamellar shape was Cr-rich eutectic carbide. The solid/liquid interface morphology clearly showed that the Cr-rich eutectic carbide formed just after the script type MC carbide.

• Applied Microscopy
• /
• 제18권1호
• /
• pp.49-59
• /
• 1988

Fine structures of the testis and vas deferens in the fall-web worm, Hyphantria cunea Drury, are studied with electron microscope. Adult worms have single testis close to the midlines of the abdomen. Testis is composed of 4 follicles which are incompletly separated from each other and bounded together by a peritoneal sheath. The peritoneal sheath consisted of outer cuticular layer and two kinds of inner layers, in which glycogen particles are dispersed commonly. These two layers are divided by the morphology of cytoplasmic granules. Follicular epithelium forming the wall of the follicles have melanin pigment granules, and trachea or tracheoles are extended through this epithelium. In the cysts of adult testis, matured spermatozoa are grouped together in bundles and after releasing the sperm bundles to the vas deferens, lamellar shaped lysosomes appeared in the cytoplasms of the cyst cells. The number of spermatozoa per cyst is exactly 256 ($2^8$), this number is characteristics of the Lepidoperan species. Vas deferens is a tube with a fairly thick bounding epithelium, a basement membrane and a layer of circular muscle outside it. At the apical portion of the epithelial cells, microvilli are well developed. And in the cytoplasms of these cells, numerous excretory granules are observed.

• 폴리머
• /
• 제28권6호
• /
• pp.509-518
• /
• 2004

비대칭 블록 공중합체와 단일고분자로 구성된 블렌드의 미세 도메인 구조와 결정화 거동을 소각 X-선 산란, 광학 현미경 및 DSC를 사용하여 조사하였다. 본 연구에서는 폴리(메틸 메타크릴레이트) 블록의 무게 분률이 0.53인 폴리(메틸 메타크릴레이트)-폴리스티렌 이종 블록 공중합체 (PMMA-b-PS)를 저분자량 폴리(비닐리덴 플루오라이드) (PVDF)와 혼합하였다. PVDF 함량 증가에 따라 블렌드 미세구조가 라멜라에서 실린더 구조로 전이하였으며, PVDF의 결정화는 결정화 이전에 형성된 미세구조의 배열을 교란시켜 질서도가 낮은 형태를 야기시켰다. 또한, PVDF 결정화 거동은 PMMA 블록과의 혼화성 및 미세 도메인에 의해 부가되는 공간적 제한에 큰 영향을 받았다.

• 한국재료학회지
• /
• 제27권1호
• /
• pp.8-11
• /
• 2017

Binary Ti-Al alloys containing 50 to 60 atomic percent aluminum are rapidly solidified by hammer anvil method under an argon atmosphere. Constituent phases in each alloy are identified by X-ray diffractometry and microstructures of the alloys are investigated using a transmission electron microscope. In alloys with aluminum content between 50 and 54 percent, a second phase exists besides TiAl(${\gamma}$); this second phase is identified as $Ti_3Al$(${\alpha}2$). The ${\alpha}2$ phase is observed in two types of morphology. One is as fine lamellar alternating with ${\gamma}$ and the other is as a particle. It is concluded that the existence of a metastable phase with the morphologies stated above should arise from a higher quenching rate attained by the hammer anvil method as compared to the conventional roll or splat-quench method. Implications of the above observation are discussed with respect to the phase relations in the Ti-Al binary system; these implications are still controversial in many respects.

• Journal of Microbiology and Biotechnology
• /
• 제12권4호
• /
• pp.643-648
• /
• 2002

For wastewater treatment and utilization of the biomass, a photosynthetic bacterium was isolated based on its cell growth rate, cell mass, and assimilating ability of organic acids. The isolate was a Gram-negative rod-shaped bacterium that contained a single polar flagellum and formed a lamellar intracytoplasmic membrane (ICM) system, including bacteriochlorophyll $\alpha$. The major isoprenoid quinone component was identified as ubiquinone Q-10, and the fatty acid composition was characterized as to contain relatively large amount of C-16:0 (18.74%) and C-18:1 (59.23%). Based on its morphology, phototrophic properties, quinone component, and fatty acid composition, the isolate appeared to be closely related to the Rhodopseudomonas subgroup of purple nonsulfur bacteria. A phylogenetic analysis of the isolate using its 16S rRNA gene sequence data also supported the phenotypic findings, and classified the isolate closely related to Rhodopseudomonas palustris. Accordingly, the nomenclature of the isolate was proposed as Rhodopseudomonas palustris KUGB306. A bench-scale photosynthetic bacteria (PSB) reactor using the isolate was designed and operated for the treatment of soybean curd wastewater.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1993년도 춘계학술발표회
• /
• pp.99-100
• /
• 1993

Calorimetric (D.S.C) studies were carried out on the nylon 4,6 single crystals grown from 1,4-butanediol solution at various crystallisation temperatures, based on the assessment of the lamellar thickness by small angle x-ray scattering. Samples were annealed mainly ot get rid of residual solvents inside the crystals. The effect of annealing on the crystal perfection is inferred from the measured thermal properties of the crystals. Accordig to the scanning rates less than 80 K/min., D. S C. melting peaks indicate that changes in the internal morphology of nylon 4,6 crystals preapred at different crystallisation temeratures yield a thermodynamic melting temperature. Tm, of 319 $^{\circ}C$, for the infinitely extended crystal thickness (1/ι). The obtained heat of fusion value for the inginite crystal thickness, Ho, was 270 J/g from the plot of measured feat of fusion ($\Delta$Hm) vs. reciprocal crystal thickness (1/ι). based on these values, the fold surface energy, $\delta$e. of 65.4 erg/$\textrm{cm}^2$ was obtained from Hoffman-Waeeks equation. The thermodynamic melting temperature and heat of fusion of the infinite crystal thickness for the solution grow nylon 4,6 single crystals are found to be higher than of the reported corresponding solution grown nylon 6,6 single crystals. pbtained crystallinity from D. S. C measurements ranges from 40 to 50 %, which is close to the reported yalue for the nylon 6,6 single ctystals but lower than we expected.

• 열처리공학회지
• /
• 제31권5호
• /
• pp.231-236
• /
• 2018

The purpose of this study was to investigate the microstructural characteristics and hardness distribution of AZ91 magnesium alloy furnace-cooled to room temperature after solution treatment, and to compare the results with those of as-cast condition. The as-cast alloy showed a partially divorced eutectic ${\beta}(Mg_{17}Al_{12})$ phase and discontinuous precipitates (DPs) with a lamellar morphology, while only DPs were observed in the furnace-cooled alloy. The DPs in the furnace-cooled AZ91 alloy had various apparent interlamellar spacings, which would be ascribed to the different transformation temperatures during the furnace cooling. The average hardness for the furnace-cooled alloy is similar to that for the as-cast alloy. It is interesting to note that the hardness values of the furnace-cooled alloy were distributed over a narrower range than those of the as-cast alloy. This is likely to be caused by the relatively more homogeneous microstructure of the furnace-cooled alloy in comparison with the ascast one.

• 대한금속재료학회지
• /
• 제46권3호
• /
• pp.111-117
• /
• 2008

The effects of the dissolved cementite on the mechanical properties have been experimentally investigated. The steel wires were fabricated depending on the carbon content of 0.82 and 1.02 wt.% and drawing strain from 4.12 to 4.32. The bending fatigue resistance and torsion ductility were measured by a hunter fatigue tester and torsion tester specially designed for thin-sized wires. The results showed that as the drawing strain and carbon content increased, the fatigue resistance and the torsional ductility of the steel wires decreased, while the tensile strength increased. In order to elucidate this behavior, the microstructure in terms of lamellar spacing (${\lambda}_p$), cementite thickness ($t_c$) and morphology of cementite was observed by advanced analysis techniques such as transmission electron microscope (TEM) and 3 dimensional atom probes (3-D AP).

• 한국어류학회지
• /
• 제35권3호
• /
• pp.171-176
• /
• 2023

본 연구에서는 붕어 Carassius auratus와 떡붕어 C. cuvieri 후각기관의 형태 및 형태계측학적 특징을 실체현미경과 통계프로그램 SPSS를 이용하여 묘사하고 분석하였다. 형태에서 두 종의 후각기관은 외부적으로 반원형의 개방된 전비공, 후비공, 그리고 비경계판으로 구성하며 다수의 후판으로 이루어진 로제트를 보유한 비강 내 구조를 나타냈다. 독립표본 t-검정과 Pearson 상관계수를 이용한 두 종간 체장과 후판의 통계적 분석에서 후판의 개수는 붕어(14~20)가 떡붕어(14~16)보다 더 많았고(P<0.001), 체장대비 후판의 비율 또한 붕어(12.7±0.7%)가 떡붕어(8.2±0.6)보다 더 높은 값을 나타냈다(P<0.001). 결과적으로, 주둥이 위쪽의 개방형 비공의 위치와 모양은 외부의 후각 물질의 유입을 방해하는 경계층(boundary layer)의 감소와 연관되는 형태적 적응이며 떡붕어보다 더 작은 체장에도 불구하고 더 많은 수의 붕어 후판은 생존을 위해 더 높은 후각의존도를 반영하는 형태적 전략으로 간주되며 후판 수 차이와 체장대비 비율 차이는 두 종의 새로운 분류학적 형질로 사료된다.

• 대한화학회지
• /
• 제55권4호
• /
• pp.673-679
• /
• 2011

지글러-나타 촉매를 사용하여 에틸렌을 중합함으로써 다양한 공단량체의 종류와 조성을 갖는 이중 분자량 분포의 고밀도 폴리에틸렌이 합성되었다. 이들의 구조와 물성을 GPC, NMR, DSC, 인장 측정기를 이용하여 연구하였다. 에틸렌/1-헥센 공중합체가 에틸렌/1-부텐 공중합체보다 비슷한 조성을 가질 경우 높은 인장강도와 파단연신율을 가짐을 확인 하였다. 분자량은 고분자의 공단량체 비율이 증가할수록 감소하였다. 짧은 곁사슬은 결정화도에 영향을 주어 결과적으로 이중 분자량 분포를 갖는 고밀도 폴리에틸렌의 모폴로지와 기계적 물성에 영향을 미쳤다. SSA로 처리 후 다수의 발열 곡선이 관찰되었으며 이는 주로 에틸렌 배열길이와 라멜라 두께의 불균일성에 기인한다. 분포지수의 차이로부터 공단량체의 조성이 높은 폴리에틸렌의 SCB 분포가 균일도를 향상시킴을 알 수 있었다.