• Journal of Power Electronics
• /
• v.15 no.3
• /
• pp.634-643
• /
• 2015

This paper presents a high frequency design approach for improving efficiency over a wide load range in the self-driven phase-shifted full-bridge converters for server power systems. In the proposed approach, a detailed ZVS analysis of the lagging leg switches in both the continuous conduction mode (CCM) and the discontinuous conduction mode (DCM) is presented. The optimum dead time and the determination of the appropriate operation mode are given for high efficiency according to the load conditions. Finally, the optimum operation conditions are defined to achieve a high-efficiency. A laboratory prototype operating at 80 kHz, rated 1 kW (12 V-83.3 A), is built to verify proposed theoretical analysis and evaluations. The experimental results show that the maximum efficiency is achieved as 95% and 83.5% at full load and 5% load conditions, respectively.

• Proceedings of the KIPE Conference
• /
• 2013.11a
• /
• pp.15-16
• /
• 2013

전기자동차용 급속 충전기에서 전력변환 효율은 절연형 DC-DC 컨버터에 의해 좌우된다. 이때 DC-DC 컨버터의 출력 전압 범위가 넓기 때문에 기존의 3레벨 컨버터를 사용할 경우 충전전압이 낮을 때 순환전류가 커지는 문제점이 있다. 본 논문에서는 넓은 충전전압범위를 갖는 전기자동차용 급속충전기를 위한 3레벨 DC-DC 컨버터의 하이브리드 스위칭 기법을 제안한다. 제안한 하이브리드 스위칭 기법은 충전전압이 낮을 때 순환전류를 줄일 수 있어 주로 낮은 배터리 전압에서 동작하는 CC충전 모드 시 도통 손실을 줄일 수 있다. 또한 커플인덕터를 사용하여 순환전류를 줄이고 Lagging Lag 스위치의 ZCS 턴오프를 성취시켜 손실을 줄일 수 있다. 기존의 스위칭 방법과 하이브리드 스위칭 기법에 따른 손실을 비교하여 제안한 스위칭 기법의 타당성을 검증하였다.

• Microbiology and Biotechnology Letters
• /
• v.26 no.6
• /
• pp.566-568
• /
• 1998

Partial nucleotide sequence (nt 1-1842) of chloramphenicol resistance plasmid pKH7 has been reported previously and residual nucleotide sequence (nt 1843-4118) of pKH7 was determined and then the complete nucleotide sequence of pKH7 was obtained. pKH7 consists of 4118 bp and has three ORFs. Besides Rep and CAT proteins described in previous paper, Pre protein which mediates site-specific recombination in Staphylococcus aureus was found to be on pKH7. R $S_{A}$, a site-specific recombination site of Pre protein, and palA, a specific lagging-strand conversion signal, was also found in pKH7. Amino acid sequence of Pre protein of pKH7 was compared with those of other antibiotic resistant Staphylococcus aureus plasmids.s.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.21 no.2
• /
• pp.297-304
• /
• 2012

Recently RFID (Radio Frequency Identification) technology advances in wireless communication technologies are bringing new challenges. But RFID tag packaging technology has been lagging compared to the demand, so this technology is being required to improve reliability. In this paper, reliability comparison among 11 types of most commonly used epoxy molding in electrical/electronic components packaging has been made through analysis of confidentiality using a humidity sensor. Consequently, the variation of moisture penetration time causes has been verified by the changes in molding thickness for 3 types of epoxy, and from the result, the best experimental results were observed in terms of confidentiality. Moreover we have been confirmed the relationship between confidentiality, the molding thickness, and thermal property of epoxy through thermal analysis.

• International Journal of Quality Innovation
• /
• v.4 no.1
• /
• pp.1-19
• /
• 2003

This paper describes the origins, evolution of Quality Function Deployment and its transfer to the West. Following a comprehensive review of the literature and how QFD has been defined, and applied, the paper analyses the critical factors which impinge on QFD implementation success. A discussion which covers the enabling criteria found to be inherent in Japanese applications is contrasted with the Western approaches documented hitherto. In particular the Company Wide Quality Control (CWQC) approach in Japan versus the emerging concept of Total Quality Management and their impact on QFD implementation. A critical analysis of the main differences isolated from the review of the literature and which characterise the Japanese method of QFD implementation which is leading, and The Western approaches which appear to be lagging is included in the paper, together with some useful conclusions:

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.999-1001
• /
• 1992

This paper describes the voltage type PWM converter. Input AC current is to be sinusoidal and AC input voltage is determined by controlling the phase of the source and converter properly. By corresponding the phase of input voltage to that of base current, DC constant voltage Is to be output with high power factor driving. Also it is possible to be leading or lagging power factor driving. Optimum driving is performed by controlling the current instantaneously in the steady state or transient state.

• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.995-998
• /
• 1992

A fully software-controlled pulse-width modulatioed (PWM) rectifier with current link is presented. Line power factor is controlled, while maintaining dc current. The input fitter of the PWM rectifier is analyzed and its analysis, shows that unity power factor is achieved with lagging of the input current of the PWM rectifier with respect to the source voltage. The PWM technique is developed using a space vector modulation and is implementation is carried out with a minimal control hardware structure based on one 16-bit single-chip microcomputer. It is shown via experimental results that the proposed sheme gives good performance for the PWM rectifier with current link.

• Journal of Computing Science and Engineering
• /
• v.9 no.3
• /
• pp.119-133
• /
• 2015

While cloud computing is gaining popularity, diverse security and privacy issues are emerging that hinder the rapid adoption of this new computing paradigm. And the development of defensive solutions is lagging behind. To ensure a secure and trustworthy cloud environment it is essential to identify the limitations of existing solutions and envision directions for future research. In this paper, we have surveyed critical security and privacy challenges in cloud computing, categorized diverse existing solutions, compared their strengths and limitations, and envisioned future research directions.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.39 no.8
• /
• pp.836-846
• /
• 1990

This paper presents a Static Var Compensator (SVC) system compensating the reactive power for power system, which consists of a voltage type Pulse Width Modulation (PWM) converter and a reactance linking the converter to the source. The system drives the four quadrant modes. The system determines the magnitude of the input voltage, and then compares it with the magnitude of the source voltage by regulating the phase of the SVC about the source. Therefore, the system generates leading compensation currents when the input voltage is larger than the source in magnitude, and lagging compensation currents for smaller input voltage. Reactive power about voluntary load in power system is smoothly compensated by those compensation currents, and also power factor of source is improved. Furthermore, the SVC system using PWM method may improve the source current waveforms by eliminating the 5th and 7th harmonic components from the input voltages.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.09a
• /
• pp.19-22
• /
• 2001

For stabilization and improving power factor in the power lines, various Static Var Compensators(SVC) have been considered to be installed and partly applicated already. With all these merits of the SVC, it stil has demerits, principally evoking harmonic problems. So far, many harmonic reduction type inverters have been used in various parts. In this paper, the reactive power is controlled by amplitude of the output voltage. This paper propose that the multiple voltage source inverter have controllable power factor made by load vary at receive-stage as lagging and leakage control. The theoretical analysis on this system was confirmed through the computer simulation and the experiments.