• Interaction and multiscale mechanics
• /
• 제2권3호
• /
• pp.235-261
• /
• 2009

This study illustrates the differences between the elasto-plastic cap model and Lade's model with Cosserat rotation through the analyses of two large-scale geosynthetic-reinforced soil (GRS) retaining wall tests that were brought to failure using a monotonically increasing surcharge pressure. The finite element analyses with Lade's model were able to reasonably simulate the large-scale plane strain laboratory tests. On average, the finite element analyses gave reasonably good agreement with the experimental results in terms of global performances and shear band occurrences. In contrast, the cap model was not able to simulate the development of shear banding in the tests. In both test simulations the cap model predicted failure loads that were substantially less than the measured ones.

• 대한토목학회논문집
• /
• 제12권2호
• /
• pp.177-189
• /
• 1992

본 연구는 탄소성구성모델을 사용하여 입상토의 비배수거동해석을 위한 유한요소 프로그램을 개발한 것이다. 연구방법으로서는 지금까지 제안된 탄소성모델 가운데서 Lade의 단일항복면구성모델을 선정하고 하중이 작용할 때 체적변화가 없다는 사실에 입각, 체적변화를 억제하면서 간극수압을 구하는 Christian 기법에 의하여 이미 개발된 배수거동을 위한 유한요소 프로그램을 수정하여 비배수거동해석을 할 수 있는 유한요소 프로그램을 개발하였다. 개발된 프로그램의 검증을 위하여 백마강모래의 시험 자료와 Seed 등의 시험자료를 이용한 수치해석결과와 시험결과를 비교한 바 개발된 프로그램의 정도가 높다는 것을 확인하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.1117-1121
• /
• 2010

Several isotropic compression-expansion tests and a series of drained conventional traxial tests with various confining pressures for relative density of Beakma river sand 25%, 50%, 80% and 100% selecting Lade's Single Work-Hardening constitutive model. This examination materials use regression analysis as a basis, depending on the relative density of soil parameters change statement attributes. Yield fuction represent the soil parameters h and $\alpha$ is not affected by the changes in the relative density. $\eta_1$ could be replaced by fomula. And Numerical analysis results predicted very good and could confirm that.

• 한국지반신소재학회논문집
• /
• 제11권2호
• /
• pp.1-9
• /
• 2012

본 연구는 이 구성모델의 실용화를 위한 검토로 응력경로에 따라 어떤 특성이 있는가를 밝히기 위하여 백마강 모래를 이용하여 등방압축팽창시험과 응력경로를 달리한 일련의 배수삼축시험(CTC, Conventional triaxial compression test), TC(Triaxial compression test), RTC(Reduced triaxial compression test), OSP(Optional stress path))을 각각 수행하여 각각의 토질매개변수를 결정한다. 그리고 각각의 응력경로에 대한 시험으로부터 결정된 토질매개변수 11개를 이용하여 토질매개변수를 결정시 이용된 시험 결과를 역해석한다. 그리고 항복함수에 관련된 토질매개변수 h와 ${\alpha}$를 파괴기준에 관련된 토질매개변수 ${\eta}_1$의 상관식과 상수로 결정한 9개의 토질매개변수를 이용하여 응력경로가 다른 경우의 응력-변형률 거동에 대한 예측의 정도를 밝히기 위하여 CTC시험, TC시험, RTC시험, OSP시험 및 Fine Silica Sand시험의 결과를 각각 해석하여 단일항복면 구성모델의 실용성을 검토한다.

• 한국농공학회지
• /
• 제38권3호
• /
• pp.70-81
• /
• 1996

Solutions of geotechnical engineering problems require predictions of deformation and stresses during various stages of loading. Powerful numerical methods are available to make such predictions even for complicated problems. To get accurate results, realistic stress-strain relationships of soils are dependent on a number of factors such as soil type, density, stress level and stress path. Attempts are continuously being made to develope analytical models for soils incorporating all such factors. Isotropic compression-expansion test and a series of drained conventional triaxial tests with several stress path for Baekma river sand were performed to investigate stress-strain and volume change characteristics of Lade's single work hardening model dependant on the stress path. In order to predicted of stress-strain and volumetric strain behavior were determined the values of parameters for the mode by the computer program based on the regression analysis. Predicted stress-strain behavior of triaxial compression tests and optional stress path tests for increasing confining pressure with parameters obtained conventional triaxial compression tests agreed with several test results but the prediction results for decreasing confining pressure reduced triaxial compression tests make a little difference with test results.