• Conservation Science in Museum
• /
• v.11
• /
• pp.43-48
• /
• 2010

Excavated lacquer wares can be divided into waterlogged lacquer wares supersatuated with moisture and dry lacquer wares with little moisture. This conservation was done with dry damaged lacquer wares excavated from Daho-ri. Lacquer ware artifacts with lacquer fragments and no surface material remaining were processed using the three following methods. The three methods are reinforcing while sustaining three-dimensional form; reinforcing with earth after cleansing so that fragments are revealed due to weak lacquer fragments; and reinforcing the whole lacquer ware or parts by connecting and supporting missing parts with rayon paper, an artificial fiber paper, if the form cannot be sustained only with lacquer fragments.

• 보존과학연구
• /
• s.14
• /
• pp.77-93
• /
• 1993

In order to study for the production techniques and the materials of using in Korean Lacquer Antiques, we examined the section structure by SEM and Microscope, the qualitative analysis of lacquer layer by XRF and XRD, the qualitative analysis of Golhae layer by XRF and XRD, the qualitative analysis of Golhae by EDS on the locquer-wares which was excavated from Anapchi Pond Site in Kyungju and Miruksa Temple Site in Iksan. In the lacquer-wares excavated from Anapchi Pond Site, the lacuqer-wares layers made by a cloth attached on the surface of wooden vessel and Golhae-a mixture of clay and lacquer-covered on the cloth and finally finished with the red lacqure, being mixed with pure mercury sulfide(HgS) and lacquer. And raw materials of Golhae made of clay. The lacquer-wares excavated from Miruksa Temple Site in Iksan, we presumed that the lacquer-wares used fine born grains in place of clay for the raw materials of Golhae. Expecially in case of black lacquer-tray, we found that lacquer put on the surface of wooden vessel without cloth attaching and Golhae covering and the production of wooden vessel was used power-driven machine.

• Conservation Science in Museum
• /
• v.8
• /
• pp.41-47
• /
• 2007

The wooden lacquer wares, which had excavated from the water reservoir in the Isong Sansung Fortress, were applied with vacuum freeze drying method and treated, after they had been substituted with tbutanol, and treated with PEG-pretreatment. The manufacturing technique, which had not been investigated in the past, was examined through the investigation of the wood and the lacquer used for wooden lacquer wares, and the pieces of the lacquer wares, which had been stored for a long time, were restored for the exhibition and conservation. As the result, the wooden lacquer wares were manufactured, using black alder belonging to the group of Alnus, and the lacquer was painted on the bottom-layer by mixing the powdered soil and lacquer, and it was confirmed that the lacquer mixed with the black pigment and the pure lacquer had been painted alternatively over 2 times, and that the wooden lacquer ware had been manufactured through total 5 times of being painted.

• Journal of Conservation Science
• /
• v.21
• /
• pp.49-58
• /
• 2007

Among the treatment results of test samples of the antique lacquer-ware, the treatment with PEG#3,350 40% solution displayed excellent effect with low shrinkage ratio; in weight gain the treatment with Sucrose 19%+Glycerin 1%(t-butanol 5% in water) solution showed consistent increase. However during the impregnation process of Sucrose, the weight of the testing samples decreased by dehydration because the inner part of the test samples and the treatment solution showed concentration gradient. Therefore, we concluded longer impregnation period should be necessary to prevent dehydration. Since both higher and lower molecular weight treatment chemicals could penetrate into the wood of the lacquer-ware, air drying and conditioning after impregnation treatment with high concentration chemicals would be possible, as well as vacuum freeze-drying.

• Journal of the Korea Furniture Society
• /
• v.27 no.1
• /
• pp.26-34
• /
• 2016

Lacquer has a high value as a coating of typical arts and crafts in East Asia including Korea, Japan, and China and traditional representative of the gorgeous satin that is fit to the cultural conditions of each region. Lacquer is harmless to the human body and its robustness, preservatives, moth proofness, and strong heat resistance can maintain a long life. It seems that it will be able to make a significant contribution to create a variety of products if we continually study and raise the productivity and quality of the goodness of these lacquer. In this context, we reviewed the Pitae lacquer wares, which is one of the lacquer of traditional techniques that can be applied to the development of daily necessities and cultural product. Joining the goodness of harmless and environment-friendly lacquer and the characteristics of the leather that can produce a variety of physical beauty can develop household goods of tradition and modernity in harmony. It is worthwhile re-interpreting the tradition in the aspect that we can develop our culture from a modern, plastic, and artistic point of view.

• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.125-130
• /
• 2015

Specific techniques and materials in conservation of traditional lacquer has not been transmitted. This study aims to compare the basic characteristics of the filler which used in the base layer of lacquer conservation. Tohoe(a mixture of lacquer and Clay) and the three kinds of additives which is mixed with Tohoe and Goksu(a mixture of lacquer, wood powder and rice starch) are estimated in drying rate, impact resistance, abrasion. Among those samples, the more amount of clay causes fast dryness speed and worse cracks on the surface. The impact resistance is weakened at high amount of clay. There is no significant differences of impact resistance between both additives that is mixed with the samples and additives. The samples that are mixed with Goksu and additives show high impact resistance. In the polishing test, the more amount of filling powders show higher grinding degree and the sample that are mixed with wood powder and charcoal show higher degree as well. The highest grinding degree is Maekchil and Goksu but the lowest one is the sample of the rooftile powder mixture.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.371-380
• /
• 2011

For studying of the characteristics and structures of material in lacquer layer in Joseon Dynasty, 6 types and 7 pieces of sample were observed with the optical microscope and the polarizing microscope. For analyzing, SEM-EDS and FT-IR were used and TOF-SIMS was also used on trial. The former is directly varnished on the iron layer so the sample includes more iron component than the others. In the results of the trial analyzing in TOF-SIMS, it is possible to verify the minerals on the foundation layer with the infinitesimalsample. The analysis results of lacquer layer with FT-IR are compared with previous studies and all the samples have the spectrum of the lacquer. Through the result of the Joseon lacquer layer, there are not many samples, however, when it compared with unified Silla, the period of the Three States, and the previous era, the lacquer layers are simpler than the relics from previous era. It looks to have the relation with the simplification of manufacturing method because of expanding of the using of lacquer wares.

• Conservation Science in Museum
• /
• v.7
• /
• pp.43-51
• /
• 2006

From the low swamp remains in Sinchang-dong, Gwangju, a number of wooden lacquerware along with various wooden artifacts were excavated. These excavated lacquerware have deteriorated and weak wooden parts and the lacquer layer come off from the wooden parts; they are very likely to peel off and crack. Therefore, we impregnated the lacquerware in PEG#4000 40% solution that was effective for vacuum freeze drying and finished freeze-drying below 0°…. We compared the weight of wood and lacquerware right after the freeze-drying with the weight after leaving them in a airtight space with 60% RH (relative humidity). The comparison results showed no change in weight; thereby we confirmed controlling the finishing temperature during freeze-drying could control the moisture in wood after drying and it could stabilize wood against the change in moisture in the atmosphere. according to the analysis of the lacquer fragment, the base layer was pasted on the wooden surface with mixed black pigment and the upper layer was pasted three or four times with the mixture of lacquer and black pigment; or it was pasted without the black base coating.

• Conservation Science in Museum
• /
• v.7
• /
• pp.53-62
• /
• 2006

The wooden armor frame and various lacquerware artifacts excavated from the low swamp remains in Imdang, Gyeongsan have very weak material and lacquer coating; in case they are exposed in the air, they are likely to be shrunken and deformed immediately. The wooden armor frame has large size and it might be dissolved during freeze-drying. The lacquer coating of lacquerware blocks the penetration of chemicals and it is very likely to swell or peel off during the treatment. Therefore, to prevent the dissolution during vacuum freeze-drying, the wooden armor frame was replaced with t-butanol and impregnated in t-butanol solution with PEG#3, 350 43%, and lacquerware was impregnated in PEG#3, 350 40% solution at room temperature and freeze-dried. According to the analysis of the lacquer fragment from the lacquerware, the lid and the mounted cup was pasted with the mixture of lacquer and black pigment (soot) on the base layer after the first coating and pasted two or three times more with natural lacquer; the red lacquered wooden cup was pasted with the mixture of lacquer and black pigment on the base layer and pasted once on the middle layer. The top lacquer (red) was pasted with the mixture of iron oxide(Fe₂O₃).

• Journal of the Korean Society of Costume
• /
• v.9
• /
• pp.89-106
• /
• 1985

The peony patterns represent one of decorative designs with their fortunate and auspicious implications. The pattern emerged first from T'ang Dynasty, flourished during the periods of Sung and $Y\ddot{u}an$ in China, and then was introduced to Korea and Japan. For the purpose of systematizing the development of the pattern, this thesis is about the process of formation and various changes in peony patterns. It examines in general the literatures and the craft works, such as textiles, lacquer wares, chinas and porcelains, and metals. The characteristics of peony patterns are dealt respectively in this study about T'ang, Sung, $Y\ddot{u}an$, Ming and Ch'ing Dynasties of China, Shila, Korea, Chosun, of Korea, and Nara, Haian, Kamakura, Muromachi, MomoYama, Aedo of Japan.