• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.48-53
• /
• 2000

Lacquer tree can be proliferated by root or stem cutting, and seed. In case of proliferation by seed, however, the germination rate is very low. Thus, the present study was carried out to obtain aspceptic lacquer plant in vitro from seed because natural tissue culture was highly defiled by unknown fungi and bacteria. First seed grading on distilled water was 50.7% and second seed grading was 20.8% after 98% sulfuric acid treatment for 2 hours. Removal of inner seed coat was higher with 32.4% than non-removal of outer seed coat and removal outer seed coat in rooting rate. In germination rate according to pre-treatment, growth regulators were not effective at all, but sulfuric acid was effective a little with 3%. Removal outer seed coat was increased about 4%, that germinated about 10% in MS medium supplemented with 1.0mg/L BA and 0.05mg/L NAA, 1.0mg/L BA. Lacquer tree seeds germinated after 10 days in MS medium, and aspceptic seedling of lacquer tree were obtained after 3 weeks in vitro. Germination rate, however, was lower about 10%.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.421-430
• /
• 2009

This research was carried out focusing on the urgent treatment and related studies for paint scribbling on Samjeondobi Monument (Historic Sites No. 101) in 2007. Before the preliminary test, the paint lacquer used on the surface of Samjeondobi Monument was analyzed. The paint lacquer turned out to be the paint lacquer spray composed of $Pb_3O_4$ used for the red pigment in the market. It was proved that the poultice used with the organic solvent was the best way to remove the paint pollutants following the preliminary test for the removal of paint pollutants which was performed with various removal methods by the laser, etc. However, the removing the paint pollutants was found in difficulty in contrast to the preliminary tests because the paint on the spot was hardened so rapidly over time that there was difference from the situation of the laboratory. For that problem, the poultice method with ethylene dichloride of main component from Remover (goods in the market) was the most efficient, therefore the pollutants were removed with the solution of alkyds resin and nitrocellulose and the rest part was removed by the $Laponite^{(R)}$ RD.

• Journal of Conservation Science
• /
• v.32 no.3
• /
• pp.377-384
• /
• 2016

There are physical and chemical method for removement of a lacquered layer existing on the surface when gilding an iron Buddha, these caused environmental pollution by surface degradation and is very noxious for conservation scientist's health. Thus, on this study, we conducted a lacquered layer removement experiments using Nd:YAG Laser which is contactless and eco-friendly. Specimens were made by polishing $5{\times}5$ size of iron(99.9%) specimens surfaces evenly and by differing of number of coating of unrefined lacquer, so there were thickness differences of $10{\mu}m$, $20{\mu}m$, and $30{\mu}m$. The laser machine used in this study was Nd:YAG Laser, and we used two wavelength modes; 1064 nm(160~180 mJ) for infrared light region and 532 nm(50~350 mJ) for ultraviolet light region. The experiment done by investigating the transition of specimens' surfaces with laser wavelength, energy, and numbers of investigation. The remain amount of lacquered layer surfaces before/after laser irradiation was investigated by stereoscopic microscope, observation by SEM, Non-contact Surface Roughness Measurement Device, and FT-IR etc. As a result of each analysis, we could verify the thickness of $10{\mu}m$, $20{\mu}m$ of lacquered layer removed without surface degradation when using 1064 nm wavelength with $1.0J/cm^2$ density. We could find out that Nd:YAG Laser is effective for removing remained lacquered layers when gilding an iron Buddha. In the future, when not only the metal has made various studies also wood lacquered furniture or the like, it seems to be utilized to remove the lacquer without surface damage.

• Food Science and Biotechnology
• /
• v.16 no.6
• /
• pp.935-942
• /
• 2007

The stem bark of Rhus verniciflua (RVSB) has been used in herbal medicine to treat diabetes mellitus and stomach ailments for thousands of years in Korea, despite its content of the plant allergen, urushiol. A new biological approach for the removal of urushiol from RVSB using mushrooms is described. All mushroom species (11 sp.) employed in this study were able to grow on RVSB, although the growth rate (mm/day) was lower than the control (sawdust). The components of urushiol congeners [C15 triene (m/z 314), C15 diene (m/z 316), C15 monoene (m/z 318), and C15 saturated (m/z 320)] were purified by HPLC and identified by GC-MS. A C15:3 (3-pentadecatrienly catechol) was found to be most abundant in RVSB. Urushiol analogues decreased remarkably from 154.15 to 10.73 mg/100 g (approximately 93%) by Fomitella fraxinea, whereas Trametes vercicolor showed only a 1.46% degradation capacity despite its 2 fold higher growth rate. Similarly, laccase activity was found to be high for F. fraxinea and low for T. vercicolor. Moreover, approximately 98% detoxification was accomplished by F. fraxinea cultivated on RVSB supplemented with 20%(w/w) rice bran. These findings suggest that mushrooms can be used in the detoxification of RVSB.

• Journal of Plant Biotechnology
• /
• v.30 no.3
• /
• pp.275-279
• /
• 2003

Excised cotyledons and embryo axises of zygotic embryos of Rhus vemicifera were cultured on Murashige and Skoog(MS) medium with various concentrations of 2,4-D. About 3-5% of explants produced callus. Embryogenic callus was preferentially induced from basal parts of embryo axis of zygotic embryos seeds when they were cultured without removal of seed coats. Somatic embryos were developed from embryogenic callus in growth regulator-free medium after 2-3 subcultures on medium with 1.0mg/L 2,4-D and these embryos were matured to cotyledonary stage. Plantlets with well-developed shoots and roots from embryos were obtained on $\frac{1}{4}$MS medium with GA$_{3}$. After acclimatization of plantlets on artificial soil, they were exposed to soil pots.