• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.96-104
• /
• 2008

In this study, the observation of test pieces with an optical microscope was carried out after fabricating 4 groups of standard lacquer, in order to inquire into the ancient lacquering techniques. Group I had transparent reddish brown color, and the part of layer was indefinite, and the layer polished was easily distinguished. Group II had mostly transparent yellowish brown color, and it was possibility distinguished the layers when they were varnished with mixed lacquer after prime coating, and when they were varnished with lacquer as the prime coating. Group III set up membrane in the hardening process of the lacquer, and the lacquer and the unsaturated fatty acid of internal part was dried, so the top layer and the lacquer layer were separated and observed. Group IV: When the lacquer coat film of Group IV test pieces were observed in polarized light, the ferrous components were seen as the black and red color were mixed, and the silica crystals of silty soil were distinguished by reflection of lights. And the colors were distinguished as the lacquer layer of ruddle had red color, and the mixed lacquer of reddish lacquer and ruddle had the deep red color at the top and the bottom, but the middle part had the bright red color.

• Journal of the Korean Wood Science and Technology
• /
• v.51 no.2
• /
• pp.69-80
• /
• 2023

This study conducted scientific analyses on eight objects of wooden lacquerware to understand the manufacturing techniques of wooden lacquerware in the late Joseon Dynasty. The results of lacquer layer analysis with a microscope and scanning electron microscopy-energy dispersive X-ray spectrometry revealed that most samples were composed of 1-3 lacquer layers. Moreover, a red-colored layer was found to be red ocher and cinnabar, and Fourier-transform infrared spectroscopy analysis was carried out to determine the components of the lacquer layer. The detected components were mostly lacquer and partially cashew shell nut liquid.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.5
• /
• pp.610-621
• /
• 2018

In conservation treatment lacquer has been used variously as a restoration material. However, dealing with Lacquer is very difficult as it dried in high humidity that can be harmful to the base materials. Also being natural varnish, dried lacquer layer is very different from the drying condition and the quality of the lacquer. These make difficult to predict the result of drying lacquer. In this study, using the humidity control machine, firstly, the main contents of the two different type of lacquer was experimented. And these lacquers was cured in various conditions. The duration time was checked until totally hardened. After that, obtained lacquer layers was analyzed to understand optical properties. Therefore, this study made a result about the relationship between characteristics of lacquer layer and the hardening condition. As a result, duration time of the Korean lacquer drying which has average 13.4% more urushiol than the Chinese lacquer is recorded a twice or triple decrease over it of the Chinese one. And, in all types of lacquer, the higher humidity makes the faster a pace of lacquer dried. In same lacquer, the shorter the duration time of drying lacquer is much darker and glossier. However, gloss deteriorated in saturated humidity. In humidity lower than RH 70%, lacquer is not hardened in 336 hours. When the layer totally cured through long period more than 30 days, the drying lacquer is appeared high brightness and almost transparent. Thus, in lower than RH 70%, it is hard to obtain durable layer.

• 보존과학연구
• /
• s.14
• /
• pp.77-93
• /
• 1993

In order to study for the production techniques and the materials of using in Korean Lacquer Antiques, we examined the section structure by SEM and Microscope, the qualitative analysis of lacquer layer by XRF and XRD, the qualitative analysis of Golhae layer by XRF and XRD, the qualitative analysis of Golhae by EDS on the locquer-wares which was excavated from Anapchi Pond Site in Kyungju and Miruksa Temple Site in Iksan. In the lacquer-wares excavated from Anapchi Pond Site, the lacuqer-wares layers made by a cloth attached on the surface of wooden vessel and Golhae-a mixture of clay and lacquer-covered on the cloth and finally finished with the red lacqure, being mixed with pure mercury sulfide(HgS) and lacquer. And raw materials of Golhae made of clay. The lacquer-wares excavated from Miruksa Temple Site in Iksan, we presumed that the lacquer-wares used fine born grains in place of clay for the raw materials of Golhae. Expecially in case of black lacquer-tray, we found that lacquer put on the surface of wooden vessel without cloth attaching and Golhae covering and the production of wooden vessel was used power-driven machine.

• Journal of Conservation Science
• /
• v.27 no.4
• /
• pp.371-380
• /
• 2011

For studying of the characteristics and structures of material in lacquer layer in Joseon Dynasty, 6 types and 7 pieces of sample were observed with the optical microscope and the polarizing microscope. For analyzing, SEM-EDS and FT-IR were used and TOF-SIMS was also used on trial. The former is directly varnished on the iron layer so the sample includes more iron component than the others. In the results of the trial analyzing in TOF-SIMS, it is possible to verify the minerals on the foundation layer with the infinitesimalsample. The analysis results of lacquer layer with FT-IR are compared with previous studies and all the samples have the spectrum of the lacquer. Through the result of the Joseon lacquer layer, there are not many samples, however, when it compared with unified Silla, the period of the Three States, and the previous era, the lacquer layers are simpler than the relics from previous era. It looks to have the relation with the simplification of manufacturing method because of expanding of the using of lacquer wares.

• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.247-258
• /
• 2010

We conducted optical microscopy, infra-red spectroscopy and SEM-EDS analysis of the lacquer layers on the wooden coffins excavated from King Muryeong's Tomb. We found four varnishing methods according to the sub-materials of lacquer layers: The lacquer of wooden coffins with black paint layer on the surface were classified with two groups; single layer and three layers. The lacquer of wooden coffins without black paint layer on the surface were classified with two groups; single layer and two layers. IR spectra of the laquer were same as those of the oriental laquer. The SEM-EDS analysis showed that the lacquer layers were mixed with iron, copper and calcium.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.1
• /
• pp.82-88
• /
• 2007

Two experiments were conducted to see the effects of lacquer meal (Rhus verniciflua) on layer performance. In Exp. 1, seventy-two Hy-Line brown layers, 46 wk of age were fed 0, 1.5% and 3.0% lacquer added diets for 6 weeks. Diets contained 2,650 kcal/kg ME and 16.50% CP. In Exp. 2, high-energy diets were fed to 72 Hy-line brown layers of 46 wk age for 6 wk. The diets were: control (3,000 kcal/kg ME and 16.50% CP); T1 and T2 contained 1.5 and 3.0% lacquer respectively, in addition to high energy levels. Each treatment had four replicates with 6 birds each in both the experiments. During Exp.1, there was no effect on average daily feed intake, egg production and feed efficiency, however, egg weight was linearly (p=0.0128) decreased with the addition of lacquer in diets. The egg quality parameters measured at bi-weekly intervals did not reveal any particular trend. In Exp 2., high-energy diets have decreased the feed intake and egg production in all groups. However, feeding lacquer at 1.5% increased the egg production by 9% than control. The yolk fat content was increased due to treatments showing quadratic trend (p=0.0683). The liver fat content was decreased by 40-43% than control in lacquer added diets. Except palmitic, oleic and arachidonic acids, some yolk fatty acids showed a linear decreasing trend in lacquer diets. The serum triglycerides and total cholesterol levels were not influenced with lacquer in the diets; however, the serum glucose level was linearly decreased with the addition of lacquer. In conclusion, lacquer meal supplementation significantly affected the performance of layers fed high-energy diets.

• Journal of the Korea Furniture Society
• /
• v.19 no.5
• /
• pp.307-318
• /
• 2008

Scientific methods for grading urushi lacquer includes general properties (viscosity, pH etc), and quantitative analysis of moisture, urushiol, gum, laccase content etc, and properties of coating layer such as set to touch drying time, gloss, color difference, delamination strength, tensile strength of film. The grading results evaluated by scientific method showed n order with chinese urushi lacquer (E) > domestic urushi lacquer (A) > japanese urushi lacquer (C) > chinese urushi lacquer (D) > domestic urushi lacquer (B). It is different from hose of traditional methods. Therefore, a more accurate grading of urushi lacquer should be ade by combining traditional method with scientific method.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.1
• /
• pp.134-151
• /
• 2014

This paper deals with a review of the structure and production techniques of the Dried-lacquer Amitabha Buddha statue enshrined in Geungnakjeon Hall of Simhyangsa Temple, located in Daeho-dong, Naju-si, Jeollanam-do, Korea. To achieve this goal, X-ray date and two rounds of field research were performed. The data collected were reviewed, and a sample peeled off from the damaged part was analyzed to investigate the structure and material of the background layer. The results revealed that the Simhyangsa Temple Buddha statue was an almost empty Dried-lacquer(Hyeopjeo) Buddha statue where wood core had not been framed and inserted in the statue. It was thus observed that considering that the clothes wrinkles clearly remained, the same one as the irregularity of the outer clothes wrinkles, the Dried-lacquer layer was lifted made in an almost complete shape in the process of forming the clay figure as the origin form. The statue was found to be diagonally incised from the top of the head to the back of the neck to remove the clay and wood core. But in other sites, no incision was confirmed. It was observed that on the site of the head where the incision was made, an adhesives(lacquer or paste) was used. In addition, the black eyes were impacted with beads and the ears, hands, bands, and knots were made of wood. These features are identically shown in the Dried-lacquer Amitabha Buddha statue from Seonguksa Temple, known as a work of the late Goryeo dynasty; the Seated Dried-lacquer Buddha statue in Okura Museum of Art in Tokyo, Japan; the Seated Dried-lacquer Amitabha Buddha statue from Jungnimsa Temple, know as a work of the early Joseon dynasty; and the Seated Vairocana Buddha statue in Bulhoesa Temple, the Seated Dried-lacquer Amitabha Buddha and the Seated Dried-lacquer Buddha statue from Silsangsa Temple. The analysis of the back layer demonstrated that the ground layer and the red lacquer were the production of the time. In particular, the bone ash used for the ground layer was also coated for the ground layer of Buddha statues as well as for the production of the lacquerware during the Goryeo dynasty. It was also found that gold mending was conducted more than twice even in modern times and that the layer of the production time was well preserved despite gold mending several times.

• Conservation Science in Museum
• /
• v.8
• /
• pp.41-47
• /
• 2007

The wooden lacquer wares, which had excavated from the water reservoir in the Isong Sansung Fortress, were applied with vacuum freeze drying method and treated, after they had been substituted with tbutanol, and treated with PEG-pretreatment. The manufacturing technique, which had not been investigated in the past, was examined through the investigation of the wood and the lacquer used for wooden lacquer wares, and the pieces of the lacquer wares, which had been stored for a long time, were restored for the exhibition and conservation. As the result, the wooden lacquer wares were manufactured, using black alder belonging to the group of Alnus, and the lacquer was painted on the bottom-layer by mixing the powdered soil and lacquer, and it was confirmed that the lacquer mixed with the black pigment and the pure lacquer had been painted alternatively over 2 times, and that the wooden lacquer ware had been manufactured through total 5 times of being painted.