• 국제초고층학회논문집
• /
• 제7권4호
• /
• pp.265-285
• /
• 2018

This paper presents a state-of-the-art review on the design, research and education aspects of fire safety engineering (FSE) with a particular concern on high-rise buildings. FSE finds its root after Great Fire of Rome in 64 AD, followed by Great London Fire in 1666. The development of modern FSE is continuously driven by industry revolution, insurance community and government regulations. Now FSE has become a unique engineering discipline and is moving towards performance-based design since 1990s. The performance-based fire safety design (PBFSD) involves identification of fire safety goals, design objectives, establishment of performance criteria, and selection of proper solutions for fire safety. The determination of fire scenarios and design fires have now become major contents for PBFSD. To experience a rapid and positive evolution in design and research consistent with other engineering disciplines, it is important for fire safety engineering as a profession to set up a special educational system to deliver the next-generation fire safety engineers. High-rise buildings have their unique fire safety issues such as rapid fire and smoke spread, extended evacuation time, longer fire duration, mixed occupancies, etc., bringing more difficulties in ensuring life safety and protection of property and environment. A list of recommendations is proposed to improve the fire safety of high-rise buildings. In addition, some source information for specific knowledge and information on FSE is provided in Appendix.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 1999년도 High Temperature Superconductivity Vol.IX
• /
• pp.102-106
• /
• 1999

We have designed and fabricated a four-bit shift register circuit using YBCO bicrystal junctions and experimentally tested its operations by a computer-controlled digital measurement set-up. Laser ablated YBCO thin films with clean surface were used in this work. The circuit consists of the shift register and two read SQUIDs placed next to each sides of the shift register. The SQUIDs were inductively coupled to the nearby shift register stages. A probe equipped with high speed coax lines were used in this experiment. The major obstacle in testing the circuit was the interference between the read SQUIDs and we solved the problem by finding the correct operation points of the SQUIDs from the simultaneously measured modulation curves. Loaded Data("1" or "0") were successfully shifted from a stage to the next one by a controlled current pulse injected to the bias lines located between the stages and the data shifts were correctly monitored by the read SQUIDs

• Asian Pacific Journal of Cancer Prevention
• /
• 제13권7호
• /
• pp.3159-3163
• /
• 2012

Background: For cervical cancer the epidemiological profile is poorly known in Morocco and no data is available concerning the direct medical costs. The purpose of this work is to estimate the direct cost of medical management of invasive cervical cancer during the first year after diagnosis in Morocco. Methods: The estimation of direct costs of medical management of invasive cervical cancer during the first year after diagnosis in Morocco is based on the estimation of individual cost in each stage which covers diagnosis, treatment and follow-up during first year. The cost was estimated per patient and whole cycle-set using the costs for each drug and procedure as indicated by the Moroccan National Agency for Health Insurance. Extrapolation of the results to the whole country was used to calculate the total annual cost of cervical cancer treatments in Morocco. Results: Overall approximately 1,978 new cases of cervical cancer occur each year in Morocco. The majority (82.96%) of these cases were diagnosed at a late stage (stageII or more). The cost of one case of cervical cancer depends on stage of diagnosis, the lowest cost is $382 for stageCis followed by the cost of stageIA1 for young women (< 40 years) which is $2,952. The highest cost is for stageIV, which is $7,827. The total cost of cervical cancer care for one year after diagnosis is estimated at $13,589,360. The share allocated to treatment is the most important part of the global care budget with an annual sum of $13,027,609 whereas other cost components are represented as follows: $435,694 for annual follow-up activity and $126,057 for diagnosis and preclinical staging. Conclusion: This study provides health decision-makers with a first estimate of costs and the opportunity to achieve the optimal use of available data to estimate the needs of health facilities in Morocco.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권6호
• /
• pp.777-782
• /
• 2002

Reciprocal effects among local breeds and additive and heterosis effects were estimated for total milk production per lactation (TLP), lactation length (LL) and daily milk yield (DMY). Procedures for an optimum crossbreeding system were examined by comparing various crossbred combinations. Three data sets were chosen from the total records collected from 1962 to 1997. Data set I with a total of 5,938 records composed of 9 breed groups for reciprocal crosses, data set II with a total of 6,064 records composed of 5 breed groups for additive and heterosis effects and data set III with a total of 10,319 records composed of 42 breed groups for optimum crossbreeding system were analyzed. The least squares ANOVA was used. The reciprocal crosses between Red Sindhi and the Bangladeshi Local showed significant difference. When the Red Sindhi was used as cow, the cross was superior to the opposite in terms of the three performance traits. The results showed that additive breed effects on both TLP and DMY were positive and highly significant between Bos indicus and Bos taurus, whereas the individual heterosis effects were not significant. In general, any local breeds were improved two to three times by crossing with the Friesian once or twice. However, the effect was reduced when the grading up with the Friesian was repeated more than twice. On the other hand, when the local breed was crossed with the other breeds such as Holstein and Jersey, the improvement of TLP was less. Crossing the F1 cows with the Friesian bull gave further improvement. Almost the same trends were found also for LL and DMY. The local breeds and their crosses are raised mainly for draft animals, then it is recommended that the crossbreds between the local cows and Friesian are used for dairy purposes and more than 75% Friesian blood is used for beef.

• Geomechanics and Engineering
• /
• 제4권4호
• /
• pp.251-262
• /
• 2012

Triaxial tests are essential to estimate the shear strength properties of the soil or rock. Normally triaxial tests are carried out on samples of 38 mm diameter and 76 mm height. Granular materials, predominantly used in base/sub-base construction of pavements or in railways have size range of 60-75 mm. Determination of shear strength parameters of those materials can be made possible only through triaxial tests on large diameter samples. This paper describes a large diameter cyclic triaxial testing facility set up in the Geotechnical Engineering lab of Indian Institute of Science. This setup consists of 100 kN capacity dynamic loading frame, which facilitates testing of samples of up to 300 mm diameter and 600 mm height. The loading ram can be actuated up to a maximum frequency of 10 Hz, with maximum amplitude of 100 mm. The setup is capable of carrying out static as well as dynamic triaxial tests under isotropic, anisotropic conditions with a maximum confining pressure of 1 MPa. Working with this setup is a difficult task because of the size of the sample. In this paper, a detailed discussion on the various problems encountered during the initial testing using the equipment, the ideas and solutions adopted to solve them are presented. Pilot experiments on granular sub-base material of 53 mm down size are also presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2344-2346
• /
• 2002

A vacuum control system has been developed for using Ethernet Multi Serial Device Severs (EMSDS) for the Pohang Accelerator Laboratory (PAL) storage ring. There are 124 vacuum ion pumps at the storage ring. It was a very important problem to solve the problem how to control such a big number of vacuum pumps distributed around the ring. After discussions, we decided to develop a serial to ethernet interrace device sever that will be mounted in the control system rack. It has a 32-bits microprocessor embedded Linux, 12 ports RS485 (or RS232) slave interface. one channel 10/100BaseTx ethernet host port, one channel UART host port, and 16 Mbytes large memory buffer. These vacuum pumps are connected to Ion-Pump serial controllers, which chop the AC current so as to control the current in the pumps. The EMSDS connect either 100BaseTx or 10BaseT ethernet networks to asynchronous serial ports for communication with serial device. It can simultaneously control up to 12 ion-pump serial controllers. 12 EMSDS are connected to a personal computer (PC) through the network. The PC can automatically control the EMSDS by sending a set of commands through the TCP/IP network. Upon receiving a command from a PC running under Windows2000 through the network, the EMSDS communicate through the stave serial interrace ports to ion-pump controller. We added some software components on the top of EPICS (Experimental Physics and Industrial Control System) toolkit.

• 동굴
• /
• 제76호
• /
• pp.37-42
• /
• 2006

The Dielectric Barrier Discharge (DBD) is a nonequilibrium gas discharge that is generated in the space between two electrodes, which are separated by an insulating dielectric layer. The dielectric layer can be put on either of the two electrodes or be inserted in the space between two electrodes. If an AC or pulse high voltage is applied to the electrodes that is operated at applied frequency from 50Hz to several MHz and applied voltages from a few to a few tens of kilovolts rms, the breakdown can occur in working gas, resulting in large numbers of micro-discharges across the gap, the gas discharge is the so called DBD. Compared with most other means for nonequilibrium discharges, the main advantage of the DBD is that active species for chemical reaction can be produced at low temperature and atmospheric pressure without the vacuum set up, it also presents many unique physical and chemical process including light, heat, sound and electricity. This has led to a number of important applications such as ozone synthesizing, UV lamp house, CO2 lasers, et al. In recent years, due to its potential applications in plasma chemistry, semiconductor etching, pollution control, nanometer material and large area flat plasma display panels, DBD has received intensive attention from many researchers and is becoming a hot topic in the field of non-thermal plasma.

• 한국해안해양공학회지
• /
• 제13권1호
• /
• pp.1-8
• /
• 2001

파랑으로 인해 발생되는 흐름은 연안에서 질량수송의 일련의 과정을 야기시키므로 연안유역의 관리에 파랑과 흐름의 상호작용에 대한 정확한 이해가 요구된다. 본 논문은 적응가능한 사면 구조 격자에 근간을 둔 파랑장과 흐름장을 혼합한 수치모델을 기술하였다. 사용한 모델은 쇄파, 천수, 굴절, 회절, 파랑과 흐름의 상호작용, 평균해면의 저하와 상승, 혼합 과정, 바닥 마찰 효과 그리고 해안선에 접한 운동 등을 해석할 수 있다. 주기와 수심으로 평균한 지배 방정식은 단계적으로 엇갈린 사면구조 격자에 적응 가능한 Adam-Bashforth 2차 유한 차분 기법으로 양해적으로 모델화 되었다. 본 모델로부터의 결과는 평면 해변에서 경사 입사파에 의해 발생된 연안류의 실험치와 타당한 일치를 보였다.

• 한국정보통신학회논문지
• /
• 제14권5호
• /
• pp.1295-1302
• /
• 2010

본 논문에서는 LVQ(Learning Vector Quantization) 네트워크를 이용한 수신 신호 세기(Received Signal Strength Indication) 기반 실내 위치인식 시스템을 제안하였다. 제안한 방식의 유용성을 확인하기 위하여 실험을 수행하였고, 일반적인 삼각측량 방법과 비교하였다. 실험실을 40개의 영역으로 나누고 6개의 고정 노드를 설치하였다. 무선 채널의 대수-정규 경로 손실 모델을 구성하고, 수신 신호 강도를 거리로 변환하였다. 변환한 정보를 LVQ의 입력으로 사용하였다. LVQ 네트워크의 학습을 위해 영역의 인덱스를 목표값으로 설정하였다. 실험을 통해서 최적의 서브클래스 개수를 결정하였고, LVQ 네트워크의 훈련을 통해서는 96%, 테스트를 통해서는 91%의 성능을 확인하였다.

• ETRI Journal
• /
• 제31권5호
• /
• pp.481-488
• /
• 2009

This paper proposes a new multiuser scheduling algorithm that can simultaneously support a variety of different quality-of-service (QoS) user groups while satisfying fairness among users in the same QoS group in MIMO broadcast channels. Toward this goal, the proposed algorithm consists of two parts: a QoS-aware fair (QF) scheduling within a QoS group and an antenna trade-off scheme between different QoS groups. The proposed QF scheduling algorithm finds a user set from a certain QoS group which can satisfy the fairness among users in terms of throughput or delay. The antenna trade-off scheme can minimize the QoS violations of a higher priority user group by trading off the number of transmit antennas allocated to different QoS groups. Numerical results demonstrate that the proposed QF scheduling method satisfies different types of fairness among users and can adjust the degree of fairness among them. The antenna trade-off scheme combined with QF scheduling can improve the probability of QoS-guaranteed transmission when supporting different QoS groups.