• 제목/요약/키워드: Laboratory pilot tests

검색결과 62건 처리시간 0.028초

초연약지반의 매립 및 지반개량 사례 연구 (II) - 지반개량 (Reclamation and Soil Improvement on Ultra Soft Soil (II) - Soil Improvement)

  • 나영묵;김희홍;권덕우
    • 한국지반환경공학회 논문집
    • /
    • 제6권1호
    • /
    • pp.33-44
    • /
    • 2005
  • 본 연구에서 실트폰드는 크기가 55만평의 인공연못 안에 두께가 3~20m의 초연약점토가 침전되어 있었다. 수중모래포설공법을 이용하여 +4.0m 까지 매립을 완료한 1996년에 PBD재를 타설하연서 지반개량을 시작하였다. 지반개량전 대형토조시험과 시험시공을 포함하는 대규모 사전실험을 통하여 초연약지반의 침하특성을 분석하였다. 재하초기에 대변형이 발생하는 초연약지반은 Terzaghi의 1차원 압밀과 달리 탄소성 거동을 보였다. 이러한 사전실험에 얻은 결과를 토대로 초연약지반의 지반개량을 성공적으로 수행하였다. 본 연구에서는 초연약지반에서의 지반개량의 성공사례를 제시한다.

  • PDF

실내모형실험을 통한 인홀형 탄성파콘 시험의 적용성 분석 (A Pilot Study of Inhole Type CPTu from Model Tests)

  • 장인성;정민재;권오순;목영진
    • 대한토목학회논문집
    • /
    • 제28권2C호
    • /
    • pp.95-103
    • /
    • 2008
  • 탄성파 피에조콘 관입시험(Seismic piezocone penetration test, SCPTu)은 콘 관입 저항값과 간극수압 거동 특성 외에도 지반의 동적 특성을 측정할 수 있는 시험법이지만, 해상 조사의 경우 탄성파를 일으키는 발진(Source) 장치를 설치하기가 상당히 힘들기 때문에 SCPTu를 이용하여 해양 지반에 대한 동적 물성치를 파악하는데 어려움이 있다. 따라서 해양 지반의 동적 물성치 파악을 위하여 벤더 엘리먼트를 이용한 인홀형 탄성파 탐사콘(Inhole type CPTu)을 개발하였는데, 이는 콘 롯드(rod) 내부에 발진기(Source)와 수진기(Receiver)를 내재하고 있기 때문에 외부의 부가적인 발진기가 필요 없어 육상 뿐만 아니라 해상에서도 충분히 활용할 수 있다. 이번 연구에서는 인홀형 탄성파콘의 적용성을 분석하기 위해 카올리나이트를 활용한 실내 모형 토조실험을 수행하였는데, 카올리나이트 지반의 전단파 속도를 시간에 따라 측정하였고, 또한 발진부와 수진부 사이의 거리를 다양하게 바꿔가면서 발진기와 수진기가 설치될 때 발생하는 지반 교란의 영향을 검토하였다.

다철근 스프링 네일링 공법의 보강효과 검토에 관한 연구 (A Study on Reinforcing Effect of Multi-Bar Spring Nailing)

  • 이충호;정영진;김동식;채영수
    • 한국재난정보학회 논문집
    • /
    • 제3권2호
    • /
    • pp.147-169
    • /
    • 2007
  • This study investigates the reinforcing effects of the Multi-bar Spring nails with respect to the conventional Soil-nails in artificial slopes. Based on wide experience related to design and construction, soil nails have been widely applied to reinforce slope in the world. Multi-bar spring nails are one of the improved soil nailing methods. These method maximizes bending, shearing, pull-out resistance for those multi-nails, not unit nail, that are inserted in the borehole using special spacer at regular intervals. In addition, because cutting plane is confined effect resulting from a pressured plate at the end of the nails with compression spring equipment, slope stability is secured using MS-nailing method. Analyzing bending, pull-out, shearing condition of MS-nail, it was examined throughly elastic region, load transfer capacity, reinforcing effect on cutting plate of MS-nails. In addition, Pilot and laboratory tests, numerical analysis were carried out to verify the superiority of MS-nailing method. In case, MS nailing method is applied to reinforce artificial slope, it was analyzed that bending, pull-out, shearing resistance was increased more than existing nailing method was applied. In this study, it was shown that surface failure was more or less prevented using MS-nailing method, confining effect on cutting plane using spring stuck to flexible equipment.

  • PDF

자외선/염소 반응해석 모델에 의한 미량유기물질 제거에 관한 연구 (Removal of microorganic pollutants based on reaction model of UV/chlorine process)

  • 황태문;남숙현;권민환;강준원
    • 상하수도학회지
    • /
    • 제31권1호
    • /
    • pp.73-81
    • /
    • 2017
  • The UV/chlorine process is a UV-based advanced oxidation process for removing various organic pollutants in water. The process is becoming increasingly popular because of its effectiveness in practice. It is important to the safe and efficient operation of a UV/chlorine process that the optimal operating conditions for both target removal objective and saving energy are determined. Treatment efficiency of target compounds in UV/chlorine process was mainly affected by pH and scavenging factor. In this study, kinetic based mathematical model considering water characteristics and electrical energy dose calculations model was developed to predict of treatment efficiency and optimal operating conditions. The model equation was validated for the UV/chlorine process at the laboratory scale and in pilot tests at water treatment plants.

GIS를 이용한 경지정리 토양처리 분석시스템 개발 (Development of Soil Analysis System for Land Readjustment Using GIS)

  • 이주승;고홍석;이소열
    • 대한공간정보학회지
    • /
    • 제12권4호
    • /
    • pp.13-19
    • /
    • 2004
  • 현재까지 경지정리 조사설계를 위한 토양조사결과 처리, 토양도 제작 분석 및 그에 따른 적절한 건설기계 선정은 모두 수작업에 의해 이루어져 왔다. 본 연구에서는 지리정보시스템을 이용하여 이러한 작업을 전산화하였다. 다양한 토양 분포 양상을 띠는 산간지역경지정리 조사설계 지구의 현장조사 및 실내분석 시험치에 대한 자료를 수집하여 기본도와 주제도를 작성하고, 데이터베이스를 구축하였다. 이를 분석하여 대상지역의 경지정리시 사용되는 적절한 건설기계 선정방안을 제시하고 기존의 수작업 내용과 비교 검증하였다.

  • PDF

오염지반의 전기비저항치와 토성과의 상관성 연구 (A Study on the Correlation between Electrical Resistivity and Properties of Contaminated Soils)

  • 윤길림;이영남
    • 한국지반공학회지:지반
    • /
    • 제14권2호
    • /
    • pp.79-92
    • /
    • 1998
  • 실내모형실험으로 전기비저항치와 오염된 흙의 물리적 성질과의 상관관계를 규명하기 위해서 요소분석을 수행하였다. 세가지의 모래질 구에 산업폐기물매립지의 침출수를 첨가하여 모형실험에 이용했다. 혼합토의 전기비저항치는 비저항콘을 모사한 프로브를 제작하여 측정했다. 실내모형실험에서는 흙의 함수비, 간극비. 단위중량, 함수비 및 침출수의 농도를 변화시키면서 혼합토의 전기비 저항치를 계측했다. 실험결과는 흙의 종류 및 단위중량보다는 흙의 함수비, 간극수의 전도성이 전기비저항치에 큰 영향를 미치고 있음을 알 수 있었다.

  • PDF

Fischer-Tropsch 觸媒試驗裝置의 試作 (Setting-Up of a Fischer-Tropsch Catalyst Testing Apparatus)

  • 이재성;고광국
    • 대한화학회지
    • /
    • 제5권1호
    • /
    • pp.66-72
    • /
    • 1961
  • A small size Fischer-Tropsch Catalyst testing apparatus, designed for an operating pressure of 150 psig, was test fabricated from ordinary schedule 40 iron pipes. The operability of the apparatus was tested by charging the reactor tube with the Lurgi Fischer-Tropsch iron Catalyst and passing through it the water gas obtained by gasifying the Korean anthracite using steam and oxygen. With the kind of catalyst charged, the apparatus was proven to daily produce about 50c.c. of synthetic greasy product, water and water soluble compounds, by running at a temperature of $250^{\circ}C$ and at a space velocity of 180 volume of gas per volume of catalyst/hr. About 20 consecutive days of operation is claimed to be sufficient for gathering an enough amount of synthetic products for such ordinary tests as distillation analysis, density measurement, iodine value determination etc. This trial fabrication of apparatus may be the first case of its kind in Korea in that the work has been conducted out in much a pilot plant scheme rather than a routine laboratory way which depends on small glass ware apparatus.

  • PDF

우리 나라 치과 기공사의 신체 자각 증상과 직업 관련 건강 위험 요인 (Subhective Symptoms and Work-related Health Risk Factors in Korean Dental Laboratory Technicians)

  • 김웅철;이세훈
    • 대한치과기공학회지
    • /
    • 제22권1호
    • /
    • pp.89-112
    • /
    • 2000
  • Although dental laboratory technicians are prone to be exposed to various work-related health hazardous materials such as dusts, chemicals, etc., the prevalence and nature of work-related health problems of them have not been a matter of great concern in the field of occupational health service in Korea. The purpose of the present investigation was to describe a collected profile of subjective health symptoms and their attributable factors in Korean dental laboratory technicians. A questionnaire listing five groups of health symptoms and five health symptom-related factors was mailed to randomly selected 1,900 dental laboratory technicians. Among them, 1,344 dental laboratory technicians filled out the questionnaires and returnde them. Five groups of health symptoms included musculoskeletal symptom, dermal symptoms, respiratory symptoms, eys symptoms, and ear symptoms. Five health symptom-related factors were occupational environment-related health risk factors, work history, health related habits and status, use of personal protective equipment and general characteristics. Detailed parameters of health risk factors were work posture, vibration, and chemical or physical hazards such as dust, fume, vapor, solvent, light, and noise for occupational environment-related factors; work place, area, number of employees, work hours, career, work part, and work load for work history; Broca's index, hours of sleep, eating, smoking, alcohol, exercise, health examination, and self assessed health status for health habits and status; face masks, goggles, and so on for use of personal protective equipment, and; age, sex, marital status, and education for general characteristics. Before the start of main survey, a pilot survey was carried out for validity and reliability tests of the questionnaire. All the data obtained were coded and analyzed with PC/SAS 6.12 program. The prevalence of health symptoms was the highest in musculoskelton (87.3%), and followde by eyes (78.9%), respiratory organs (64.3%), ears (57.8%), and skin (52.2%) in descending order. Statistically significant risk factors by multiple logistic regression analyses were sex, health examination, self assessed health status, and hand/finger posture in musculoskeletal symptoms; sex, self assessed health status, career, acid gas, and hand contact with resin mixture in deraml symptoms; Broka's smoking, exercise, self assessed health status, and face mask in respiratory symptoms; sex, hours of sleep, self assessed health status, work hours, work load, plaster dust, inadequate lighting, and goggle in eys symptoms, and eating, smoking, self assessed health status, and work load in ear symptoms. With the above considerations in mind, prevalence of subjective symptoms among Korean dental laboratory technicians was relatively high, and they were attributable to most of the occupational environment-related factors, work history, use of personal protective equipment, health habits and status, and general characteristics. Particularly, it is suggested that health promotion programs for promoting self- assessed health status and smoking cessation, preventive measures for protection of the female technicians’health, and reducing work load be necessary, since those factors were associated with more than one subjective symptom.

  • PDF

모래다짐말뚝의 모래대체재로서 동슬래그의 활용 (Application of Copper Slag as a Substitute for Sand in Sand Compaction Pile)

  • 천병식;정헌철
    • 한국지반공학회논문집
    • /
    • 제18권5호
    • /
    • pp.195-207
    • /
    • 2002
  • 동제련 과정에서 부산되는 동슬래그는 국내에서 연간 70여만톤에 이르나, 그 활용분야가 제한되어 사용량이 미약하여 그 처리방안이 시급히 요청되고 있는 실정이다. 이에 본 연구는 동슬래그의 입도가 0.15~5mm의 조립상태로 분포하여 환경적으로도 안정된 유리질이라는 점에 착안하여 연약지반개량공법 중의 하나인 모래다짐말뚝의 모래대체재로서의 활용방안을 모색하였다. 실내 물리.역학시험 및 모형토조시험에 의한 동슬래그의 지반공학적 재료특성을 파악하고 현장시험시공을 통해 동슬래그의 모래다짐말뚝의 모래대체재로서의 현장 적용 가능성을 일반모래와 비교.검토하였다. 그 결과 동슬래그의 재료특성이 양호하고 지지력, 침하저감효과 그리고 주변지반 개량효과면에서 동슬래그 또는 동슬래 그다짐말뚝이 우수한 것으로 나타나, 모래다짐말뚝의 모래대체재로 동슬래그를 적용할 경우 천연골재의 고갈에 따른 대체골재원으로서 산업부산물의 재활용이라는 측면에서 경제적.환경적으로 활용가치가 높으리라 판단된다.

함수량이 다른 오염지반의 측방유동압 산정에 관한 연구 (A Study on the Calculation of Lateral Flow Pressure of Polluted Soils with Various Water Contents)

  • 안종필;박경호
    • 지질공학
    • /
    • 제12권1호
    • /
    • pp.75-88
    • /
    • 2002
  • 오염된 연약지반에 편재하중이 작용하게 되면 지반 중에 침하, 측방변위, 융기 및 전단파괴 등의 큰 소성 전단변형이 발생하게 되고, 때로는 지반과 구조물에 막대한 손상을 초래하게 된다. 따라서 본 연구는 오염된 연약지반의 식내모형실험을 실시하였으며 측방유동압의 결정방법을 기존의 이론식과 비교하여 분석하였다. 모형실험은 먼저 모형재하장치를 제작하고 토조 안에 오염된 지반시료를 채워 비배수상태에서 하중을 인정한 시간 간격으로 재하하여 변형상태를 관측하였다. 그 결과 편재 하중을 받는 오염된 연약지반에서의 측방유동압은 P=K$_{0}$YH식에 의해서 산정함이 비교적 적절하며, 측방유동압의 최대값은 토층두께(H)의 0.3H 부근에서 발생하였다. 또한 종합형과 Poulos의 분포형태 및 오염되지 않는 연약점토(CL, CH) 지반보다 지표면측으로 상승하여 발생하였다.