• Korean Journal of Ecology and Environment
• /
• v.54 no.1
• /
• pp.39-48
• /
• 2021

In order to control algal bloom, which causes environmental problems such as eutrophication in freshwater ecological environments, many attempts have recently been made using biological approaches. Among them is filtration using bivalve. Algae control with filter-feeding bivalves is emerging as an eco-friendly method. In this study, bivalves collected at Baekje weir in Geum River in Korea from Jun to Sep 2020 were tested to find out the possibility of algae control using filter-feeding bivalves through laboratory experiments. The Unio douglasiae, Anodonta woodiana, and Anodonta arcaeformis collected from Baekje weir were put into a water tank (2 L) containing Clorella vulgaris, and as a result, the average filtration rate was 95.9% per animal after 24 hrs. Calculating this with the Chl-a concentration converted to a calibration curve, it was found that the average of 154.84 ㎍ L^-1 of Chl-a was reduced. Based on this calculation, the possibility that one bivalve can eliminate Chl-a in one month is 0.0005%. It is expected that the effect is 20.14% when there are 40,000 animals. These results indirectly showed how effective bivalve's ability to control Chl-a in their habitat is. Although this study was limited to calculating the algae control ability of aquatic ecosystem based on the filtration rate of bivalve and the corresponding Chl-a reduction rate, it is thought that it will be used as basic data for integrated research from various factors and viewpoints (phytoplankton, aquatic plants, benthic organisms, and sediments) through additional research.

• Analytical Science and Technology
• /
• v.33 no.6
• /
• pp.262-273
• /
• 2020

A fluorine content analysis method for krill oils, which is a representative oil formulation in foods, was developed in compliance with the Korea Food and Drug Ministry's "Guidelines for Validation of Testing Methods Related to Food". Using this method for krill oils, the presence of impurities was evaluated via combustion-ion chromatography (C-IC). A review of published technical data on fluorine in krill oils showed that while the traditional wet potentiometric method was typically used, it was not reliable. Moreover, there was no food testing/analysis laboratory in Korea to perform a fluorine test analysis on such an oil matrix. Therefore, we identified halogen (fluorine) tests, developed to national and international standards, and developed a test method suitable for krill oils by selecting a C-IC method that is sufficiently applicable to the oil matrix. Based on the characteristics of the oil matrix, the optimal test method was established through various experiments by reviewing the concerns related to loss and interference in the preparation and introduction of samples. The fluorine content test was carried out on 11 krill oil products that were purchased online. Most products (with the exception of only one) were found to contain less than the reporting limit obtained by the test method. Furthermore, after additional testing, a high fluorine content of approximately 2,000 ~ 3,000 mg/kg was detected on the krill surface, although the concentration varied depending on the area of the krill. A comparison with samples from two ISO/IEC 17025 testing laboratories confirmed that there was no significant difference in the statistical analysis results obtained by ANOVA among the three laboratories. A testing guide for fluorine content analysis was completed.

• Korean Journal of Ichthyology
• /
• v.33 no.4
• /
• pp.252-261
• /
• 2021

The egg development and early life history of short barbel gudgeon Squalidus japonicus coreanus were investigated. For the experiments, the mature adults were collected at the stream Jicheon in Korea. The eggs from the females were obtain by injecting 10 IU/g of human chorionic gonadotropin and inseminated by wet method in the laboratory. The fertilized eggs were 1.12±0.03 mm (1.10~1.16 mm, n=30) in diameter. The embryo began to hatch about 49 hrs after fertilization under water temperature of 23±1℃. The newly-hatched larvae (Yolksac larva) were 3.7±0.1 mm (3.4~3.8 mm, n=16) in total length, and they haven't Melanophore. 5 days after hatching, the Preflexion larva were 5.3±0.2 mm (5.0~5.5 mm, n=16) in total length, and they began to eat a Rotifer. 19 days after hathing, the Flexion larva were 6.0±0.3 mm (5.4~6.5 mm, n=16) in total length, and they began to eat a Brine shrimp. 29 days after hatching, the Postflexion larva were 9.6±0.5 mm (8.3~10.5 mm, n=16) in total length, and dorsal fin rays are were formed. 44 days after hatching, the juvenile were 15.5±1.0 mm (13.5~17.0 mm, n=16) in total length, and all their fin-rays were formed.

• Journal of Korean Medicine Rehabilitation
• /
• v.32 no.2
• /
• pp.65-81
• /
• 2022

Objectives This study aimed to assess the effects of oral administration of deer antler extracts on an osteoporosis-induced animal model. We analyzed the results of using deer antler single extracts on animal models with osteoporosis through a systematic review and meta-analysis. Methods We included osteoporosis studies in animal experiments that administrated deer antler extracts orally. We searched the following 13 databases without a language restriction: PubMed, EMBASE, Cochrane Library, Cumulative Index to Nursing and Allied Health Literature (CINAHL), China National Knowledge Infrastructure (CNKI), Wanfang, Korean Medical Database (KMbase), National Digital Science Library (NDSL), Korean Traditional Knowledge (Koreantk), Oriental Medicine Advanced Searching Integrated System (OASIS), Research Information Sharing Service (RISS), Korea Institute of Science and Technology Information (KISTI), and Koreanstudies Information Service System (KISS). We used Systematic Review Centre for Laboratory Animal Experimentation's risk of bias tool for assessing the methodological quality of the included studies. Results A total of 299 potentially relevant studies were searched and 11 were included for a systematic review. Nine studies used a single deer antler extract. A study compared the effects of single extracts of deer antler and antler glue, while another study compared the effects of three single extracts of deer antler, old antler, and antler glue. For evaluating the intervention effect, bone mineral density (BMD) was measured as the primary outcome, while the histomorphometric indicators of the bone and serum alkaline phosphatase and osteocalcin levels were used as the secondary outcome variables. On conducting a meta-analysis of studies on single deer antler extract, BMD was observed to be significantly increased compared to that in control group (standardized mean difference [SMD]=2.11; 95% confidence interval [CI]=1.58~2.65; Z=7.75; p<0.00001; I²=56%). As a result of meta-analysis, according to the concentration of deer antler, the group with high concentration showed statistically significantly higher BMD than the group with low concentration (SMD=1.28; 95% CI=0.74~1.82; Z=4.63; p<0.00001; I²=9%). Conclusions The research shows that the deer antler extracts have significant anti-osteoporotic effects on the osteoporosis-induced animal model. However the studies included in this research had a high methodological risk of bias. This indicates the requirement of considerable attention in the interpretation of the study results.

• Korean Chemical Engineering Research
• /
• v.60 no.4
• /
• pp.519-524
• /
• 2022

Domestic building finishing materials are being evaluated according to KS F 2271 standards according to the notification of the Ministry of Land, Infrastructure and Transport, and this test is evaluated using laboratory animals. In this study, experiments were conducted on highly combustible organic insulation materials such as EPS, urethane, and phenolic foam. The purpose of this study was to analyze the cause of the behavioral suspension of the experimental mice by measuring the average behavioral suspension time of the mice caused by the harmful gas generated when these three types of insulation materials were burned. FTIR analysis and smoke density experiment were performed as a cause analysis method for the behavioral suspension of mice, and the experimental results were analyzed by dividing the causes of behavioral suspension into suffocation by particulate matter and toxic inhalation by gaseous substances. As a result of the test, urethane was evaluated as the most harmful insulation material, and as a result of FTIR analysis and smoke density test as a cause analysis for the gas toxicity test results, it is judged that the behavioral stop of the rats by suffocation is higher than the effect of toxic inhalation. This study is a basic study on the cause analysis of harmful gases, and it will be necessary to prepare the toxicity basis and analyze various materials and gases.

• Korean Journal of Ichthyology
• /
• v.32 no.4
• /
• pp.222-231
• /
• 2020

The egg development and early life history of Sharpbelly Hemiculter leucisculus were investigated. For the experiments, the mature adults were collected at the Lake Yedang in Korea. The eggs from the females were obtained by injecting 10 IU/g of human chorionic gonadotropin and inseminated by wet method in the laboratory. The fertilized eggs were 0.97±0.02 mm (0.9~1.0 mm n=30) in diameter. The embryo began to hatch about 32 hrs after fertilization under water temperature of 22±1℃. The newly-hatched larvae were 3.0±0.2 mm (2.6~3.4 mm, n=15) in total length, and they haven't Melanophore. Six days after hatching, the Preflexion larva were 5.7±0.1 mm (5.4~5.8 mm, n=15) in total length, and they began to eat a Rotifer. 17 days after hatching, the Flexion larva were 6.8±0.2 mm (6.5~7.0 mm, n=15) in total length, and a gas bladder develop above the intestine. 30 days after hatching, the Postflexion larva were 8.8±0.7 mm (7.9~10.3 mm, n=15) in total length, three dorsal fin rays began to develop in the membrane fins. 50 days after hatching, the Juvenile were 20.8±0.8 mm (18.8~24.6 mm, n=15) in total length, and all their fin-rays were formed.

• Membrane Journal
• /
• v.32 no.5
• /
• pp.314-324
• /
• 2022

This study is aimed to design a membrane process that systematically removes contaminants including microplastics in sun-dried salt using a separation membrane. In this study, we selected the separation membrane material, pore size, and module suitable for the sun-dried salt fields, and proceeded with the experiments under the salt fields and laboratory conditions. A pilot plant was constructed and tested in our lab and in the actual saltern with the selected 200 kDa, 4 kDa ultrafiltration membranes, and 3 kDa nanofiltration membranes. Most of the impurities in the sea salt were 0.1 ㎛ in size, and more than 7 types of various microplastics were detected in the impurities. After that, as a result of checking the filtered water through the separation membrane process, no impurities were detected. As a result of comparing the existing sea salt component and the sea salt component prepared with separation membrane filtrate, impurities were effectively removed without change in the sea salt component.

• Journal of the Korean Geotechnical Society
• /
• v.26 no.6
• /
• pp.5-19
• /
• 2010

The purpose of this study is to figure out the effect of pressurized grouting on the pullout resistance and the group effect of the compression ground anchor by performing pilot-scale chamber tests and field tests. The laboratory tests are carried out for 3-types of soils which are abundant in the Korean peninsular. Experimental results showed that the enlargement of anchor diameters estimated from the cavity expansion theory matches reasonable well with that obtained from experiments. Moreover, the required injection time as a function of the coefficient of permeability of each soil type was proposed. A series of in-situ anchor pullout tests were also performed to experimentally figure out the effect of pressurized grouting on the pullout resistance. Experimental results also showed that the effect of the pressurized grouting is more prominent in a softer ground with smaller SPT-N value in all of the following three aspects: increase in anchor diameter; pullout resistance; and surface roughness. The pressurized grouting effect in comparison with gravitational grouting was found to be almost nil if the SPT-N value is more than 50. Based on experimental results, a new equation to estimate the pullout resistance as a function of the SPT-N value was proposed. And based on in-situ group anchor pullout tests results, a new group effect equation was proposed which might be applicable to decomposed residual soils which are abundant in the Korean peninsular.

• Journal of the Korean Geotechnical Society
• /
• v.25 no.6
• /
• pp.31-45
• /
• 2009

The aim of this study is to evaluate the applicability of Granulated Blast Furnace Slag to the development of the Powdered Ready-mixed Shotcrete. First of all, after accomplishing SEM analysis and Leaching Test, the laboratory and field experiments for evaluating the utility of Granulated Blast Furnace Slag were performed. As a result of SEM and Leaching test, the environmental stability was confirmed. That is, non-detection of harmful lists and dense shotcrete structure result from mixing Granulated Blast Furnace Slag. As a result of lab. and field test, Blast Furnace Slag is superior to Plain Batch in improving strength and durability. And it will be able to improve to some extent the problem caused by the delayed reaction of existing Granulated Blast Furnace Slag with alkali activated material. Also the proper amount of Granulated Blast Furnace Slag is estimated to be under 30%. Finally, it is possible that Granulated Blast Furnace Slag can apply to economical recycling and development of the Ready-mixed Shotcrete for its price is only about 5% of Silica-finne's price.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.9
• /
• pp.13-21
• /
• 2008

Partitioning tracer method is a useful tool to characterize large domains of the aquifers contaminated with light nonaqueous phase liquids (LNAPLs). Sorption of the partitioning tracers to the organic matter content of soil can potentially influence the efficacy of partitioning tracer method. LNAPL-water partitioning coefficients of tracers ($K_{nw}$), measured by static method, showed linear relationship. Sorption isotherm tests were conducted to evaluate the sorption capacity of the soils packed in the columns and the results were appropriately represented by Freundlich sorption isotherm. The sorption of tracers proportionally increased with the increase of the organic matter content of the soil. Laboratory experiments were conducted in four columns each packed with soils of different organic matter contents to determine the potential interference effects of sorption to soil organic matter content and correction factors for the errors in estimation of LNAPLs by partitioning tracer method. Though there were no contaminants added, breakthrough curves from columns packed with mixture of Jumunjin standard sand and organic matter showed separation of tracers. Columns were then contaminated to residual saturation with kerosene and breakthrough curves were obtained. The results show that sorption of tracers to soil organic matter leads to an increase in the retardation factor (R) and hence, to an overestimation of the saturation of LNAPLs. A relation between the percentage of organic matter content and the corresponding percentage error in the estimation of NAPLs has been developed.