In 1962 the governing bodies of FAO and WHO approved the establishment of a joint FAO/WHO Food Standards Programme, the creation of a jointly sponsored body to be known as the Codex Alimentarius commission to implement the Programme. It can reasonably be claimed that the Commission has assumad the leading role in establishing internation food standards throughout the world. The Codex Committee of Food Hygiene has received much advice and assistance from other international organization which have been working in this field for a number of years. In particular, it has received valuable background documentation from the International Commission on Microbiological Specifications for Foods(ICMSF) which was set up by the International Association of Microbiological Societies(IAMS), and also from the International Organization for Standardization (ISO). Nevertheless, in spite of the information supplied by governments and research bodies in this field, microbiological standards have proved to be a highly controversial subject from the point of view of Codex standards. When it is decided to establish a microbiological standard for a food or class of foods, the following technical and administrative aspects must be considered: 1) The standard should be based on factual studies and serve one or more of the following objectives: (1) to determine the conditions of hygiene under which the food should be manufactured; (2) to minimize the hazards to public health; (3) to measure the keeping quality and storage potential of the food 2) The standard should be attainable under practicable operating and commercial conditions and should not entail the use of excessive heat treatment or the additions of extra preservatives. 3) The standard should be determined after investigation of the processing operation. 4) The standard should be as simple and inexpensive to administer as possible, the number of tests being kept to a minimum. 5) Details of methods to be used for sampling, examining and reporting should accompany all published microbiological standards. 6) In establishing tolerance levels for the permissible number of defective samples, allowance should be made for sampling and other variations due to differences in the laboratory methods. The following additional points should be kept in mind: 1) It is not satisfactory to establish one set of microbiological standards for a miscellaneous group of foods, such as“frozen foods”or“precooked foods”. 2) Microbiological standards should be applied first to the more hazardous types of food on the basis of experience of expected microbiological levels, taking into account variations in composition, processing procedures, and storage. 3) When a standard is established, there should be a definite relationship between the standard and the hazard against which it is meant to protect the public. 4) The sensitivity, reliability, and reproducibility of the sampling and analytical methods should be compared in different laboratories and the methods to be used should be specified in detail as part of the standard. 5) Tolerances should be included in the standard to account for inaccuracies of sampling and analysis. 6) Standards should be applied on a voluntary basis before compliance is made mandatory.
Park, Kyung-Hun;Kim, Byung-Seok;Park, Yeon-Ki;Lee, Hee-Dong;Jeong, Mi-Hye;You, Are-Sun;Sohn, Bong-Hee;Kang, Pil-Don
The Korean Journal of Pesticide Science
/
v.11
no.4
/
pp.299-304
/
2007
Surveying, laboratory and field trial were performed to elucidate the causes of non-spinning syndrome of silkworm, Bombyx mori, abnormal symptoms of silkworm instars observed in certain sericultural fanning region. Mortality and growth of silkworm was still influenced by feeding the mulberry leaves sprayed with 10,000 fold diluted solution of standard spray of diflubenzuron WP (25%). Mortality and growth of silkworm fed with diflubenzuron-sprayed mulberry leaves with recommended spray solution were entirely affected even six weeks after spraying irrespective to the instars. Larval period of 5th instar and cocooning duration of silkworm was not affected in case 50m of buffer zone has maintained in near-by orchard field sprayed with diflubenzuron WP (25%). However, survival rate of pupae was not influenced in case 100 m of buffer zone has kept. Insect growth regulating insecticides were required to keep a certain distance of buffer zone when sprayed with water-diluted solution, 100 m from the application site at least in order to prevent contamination of the spraying drift by the chemicals.
The objective of this work was to analyze the relationship between ovine major histocompatibility complex (MHC) DRB1 gene polymorphism and genetic resistance to hydatidosis in Kazakh sheep. The Ovar (ovine MHC) class II DRB1 second exon was amplified by polymerase chain reaction (PCR) from DNA samples of 702 Kazakh sheep, including 302 sheep with hydatidosis and 400 health controls. PCR products were characterized by the restriction fragment length polymorphism (RFLP) technique using five restriction enzymes, i.e., MvaI, HaeIII, SacI, SacII and Hin1I, yielding 14 alleles and 28 genotypes. Comparing the frequency of genotypes in hydatidosis sheep with the control group, it was found that the genotype frequencies of MvaIbc, Hin1Iab, SacIIab, HaeIIIde, HaeIIIdf and HaeIIIdd in control sheep were significantly (p<0.01) higher than in hydatidosis sheep, indicating that a significant correlation existed between these genotypes and resistance to hydatidosis. Genotype frequencies of MvaIbb, SacIIaa, Hin1Ibb and HaeIIIef in sheep with hydatidosis were extremely significantly (p<0.01) higher than in the control group, and the genotype frequency of HaeIIIab was significantly higher (p<0.05), indicating that a marked correlation existed between these genotypes and susceptibility to hydatidosis. By way of analyzing haplotype with these resistant genotypes, the hydatidosis resistant haplotype MvaIbc-SacIIab-Hin1Iab of Kazakh sheep was screened out, and then verified through artificial hydatid infection in sheep. The results indicated that the infection rate of sheep with the resistant haplotype of hydatidosis was significantly lower (p<0.01) than without this resistant haplotype. It showed that the genic haplotype MvaIbc-SacIIab-Hin1Iab of Ovar-DRB1 exon 2 was the resistant haplotype of hydatidosis in Kazakh sheep.
Kim, Jo-Heon;Alam, Morshedul;Park, Doek Bae;Cho, Moonjae;Lee, Seung-Hong;Jeon, You-Jin;Yu, Dae-Yeul;Kim, Tae Du;Kim, Ha Young;Cho, Chung Gu;Lee, Dae Ho
The Korean Journal of Physiology and Pharmacology
/
v.17
no.5
/
pp.455-461
/
2013
Retinoids regulate not only various cell functions including proliferation and differentiation but also glucose and lipid metabolism. After we observed a marked up-regulation of cellular retinol-binding protein-I (CRBP-I) in the liver of hepatitis B virus x antigen (HBx)-transgenic (HBx Tg) mice which are prone to hepatocellular carcinoma (HCC) and fatty liver, we aimed to evaluate retinoid pathway, including genes for the retinoid physiology, CRBP-I protein expression, and retinoid levels, in the liver of HBx Tg mice. We also assessed the effect of chronic metformin treatment on HCC development in the mice. Many genes involved in hepatic retinoid physiology, including CRBP-I, were altered and the tissue levels of retinol and all-trans retinoic acid (ATRA) were elevated in the liver of HBx Tg mice compared to those of wild type (WT) control mice. CRBP-I protein expression in liver, but not in white adipose tissue, of HBx Tg mice was significantly elevated compared to WT control mice while CRBP-I protein expressions in the liver and WAT of high-fat fed obese and db/db mice were comparable to WT control mice. Chronic treatment of HBx Tg mice with metformin did not affect the incidence of HCC, but slightly increased hepatic CRBP-I level. In conclusion, hepatic CRBP-I level was markedly up-regulated in HCC-prone HBx Tg mice and neither hepatic CRBP-I nor the development of HCC was suppressed by metformin treatment.
This study examined how students revised their writing after reciprocal peer review and how their revision activities were influenced by the review. Undergraduates in physics class wrote a laboratory reports, exchanged comments with peers, and revised their reports afterward based on the comments they received from their peers. The comparison between the original and the revised drafts showed that students were mainly concerned with micro-meaning revisions, focusing on making changes on individual words, clauses, and sentences. Revisions that dealt with macro-meaning of the texts were not as frequent. Giving and receiving comments influenced later revision activities. Receiving comments on micro-meaning of the texts led to a significant increase in both micro- and macro-meaning revisions. Receiving comments on macro-meaning of the texts, however, did not prompt relevant revision activities. Even when students engaged in macro revision, it was negatively related to writing performance gains in one subgroup, suggesting that even after peers point out macro-problems in their writing, students are not competent to solve the problems yet. The results of the study suggest that more efforts are needed to help them to understand and manipulate the macro-meaning structure of the texts.
The Ministry of Science, ICT and Future Planning (MSIP) introduced its new Mission Oriented Evaluation System (MOES) for government affiliated research institutes and Government Supported Research Institutes (GSRI) on science and technology in 2013. The Korea Institute of Geoscience and Mineral Resources (KIGAM) is the first MOES applied Science and Technology (S&T) GSRI, that has research divisions focusing on geoscience and geological surveys, mineral resources extraction and utilization, petroleum extraction and marine mineral research, and geological applied and environment research. In appling the final evaluation of MOES on KIGAM, we found difficulty classifing the concepts of research excellence and risk (innovativeness) in guidelines of Research Evaluation Indicators (REIs) of MSIP. We have developed quantitative and qualitative indicators that can present research excellence and risk (innovativeness) through the KIGAM World Class Laboratory (WCL) strategy and related studies, innovative research and development guidelines of MSIP (2013a) and honorable R&D failure guidelines of MSIP (2013b). We have applied our developed REIs in KIGAM which handles basic research, applied and development research and public services. Therefore, our developed REIs can be effectively applied in every S&T GSRI.
Probabilistic prediction methods of landslides which have been developed in recent can be reliable with premise of detailed survey and analysis based on deep and special knowledge. However, landslide susceptibility should also be analyzed with some reliable and simple methods by various people such as government officials and engineering geologists who do not have deep statistical knowledge at the moment of hazards. Therefore, this study suggests an evaluation chart of landslide susceptibility with high reliability drawn by accurate statistical approaches, which the chart can be understood easily and utilized for both specialists and non-specialists. The evaluation chart was developed by a quantification method based on canonical correlation analysis using the data of geology, topography, and soil property of landslides in Korea. This study analyzed field data and laboratory test results and determined influential factors and rating values of each factor. The quantification analysis result shows that slope angle has the highest significance among the factors and elevation, permeability coefficient, porosity, lithology, and dry density are important in descending order. Based on the score assigned to each evaluation factor, an evaluation chart of landslide susceptibility was developed with rating values in each class of a factor. It is possible for an analyst to identify susceptibility degree of a landslide by checking each property of an evaluation factor and calculating sum of the rating values. This result can also be used to draw landslide susceptibility maps based on GIS techniques.
;Dentistry has benefited from tremendous advances in technology with the introduction of new techniques and materials, and patients are aware that esthetic approaches in dentistry can change one's appearance. Increasingly. tooth-colored restorative materials have been used for restoration of posterior teeth. Tooth-colored restoration for posterior teeth can be divided into three categories: 1) the direct techniques that can be made in a single appointment and are an intraoral procedure utilizing composites: 2) the semidirect techniques that require both an intraoral and an extraoral procedure and are luted chairside utilizing composites: and 3) the indirect techniques that require several appointments and the expertise of a dental technician working with either composites or ceramics. But, resin restoration has inherent drawbacks of microleakage. polymerization shrinkage, thermal cycling problems. and wear in stress-bearing areas. On the other hand, Ceramic restorations have many advantages over resin restorations. Ceramic inlays are reported to have less leakage than resin restoration and to fit better. although marginal fidelity depends on technique and is laboratory dependent. Adhesion of luting resin is more reliable and durable to etched ceramic material than to treated resin composite. In view of color matching, periodontal health. resistance to abrasion, ceramic restoration is superior to resin restorationl. Materials which have been used for the fabrication of ceramic restorations are various. Conventional powder slurry ceramics are also available. Castable ceramics are produced by centrifugal casting of heat-treated glass ceramics. and machinable ceramics are feldspathic porcelains or cast glass ceramics which are milled using a CAD/CAM apparatus to produce inlays (for example, Cered. They may also be copy milled using the Celay apparatus. Pressable ceramics are produced from feldspathic porcelain which is supplied in ingot form and heated and moulded under pressure to produce a restoration. Infiltrated ceramics are another class of material which are available for use as ceramic inlays. An example is $In-Ceram^{\circledR}$(Vident. California, USA) which consists of a porous aluminum oxide or spinell core infiltrated with glass and subsequently veneered with feldspathic porcelain. In the 1980s. the development of compatible refractory materials made fabrication easier. and the development of adhesive resin cements greatly improved clinical success rates. This case report presents esthetic ceramic inlays for posterior teeth.teeth.
Type I diabetes, also known as insulin-dependent diabetes mellitus (IDDM) results from the destruction of insulin-producing pancreatic $\beta$ cells by a progressive $\beta$ cell-specific autoimmune process. The pathogenesis of autoimmune IDDM has been extensively studied for the past two decades using animal models such as the non-obese diabetic (NOD) mouse and the Bio-Breeding (BB) rat. However, the initial events that trigger the immune responses leading to the selective destruction of the $\beta$ cells are poorly understood. It is thought that $\beta$ cell auto-antigens are involved in the triggering of $\beta$ cell-specific autoimmunity. Among a dozen putative $\beta$ cell autoantigens, glutamic acid decarboxylase (GAD) has bee proposed as perhaps the strongest candidate in both humans and the NOD mouse. In the NOD mouse, GAD, as compared with other $\beta$ cell autoantigens, provokes the earliest T cell proliferative response. The suppression of GAD expression in the $\beta$ cells results in the prevention of autoimmune diabetes in NOD mice. In addition, the major populations of cells infiltrating the iselts during the early stage of insulitis in BB rats and NOD mice are macrophages and dendritic cells. The inactivation of macrophages in NOD mice results in the prevention of T cell mediated autoimmune diabetes. Macrophages are primary contributors to the creation of the immune environment conducive to the development and activation of $\beta$cell-specific Th1-type CD4+ T cells and CD8+ cytotoxic T cells that cause autoimmune diabetes in NOD mice. CD4+ and CD8+ T cells are both believed to be important for the destruction of $\beta$ cells. These cells, as final effectors, can kill the insulin-producing $\beta$ cells by the induction of apoptosis. In addition, CD8+ cytotoxic T cells release granzyme and cytolysin (perforin), which are also toxic to $\beta$ cells. In this way, macrophages, CD4+ T cells and CD8+ T cells act synergistically to kill the $\beta$ cells in conjunction with $\beta$ cell autoantigens and MHC class I and II antigens, resulting in the onset of autoimmune type I diabetes.
This study is to find out effective defensive type by analysis on differences among three different defence types of the body lock technique in the ground wrestling. The subjects are 5 athletes who are in 60kg weight class. To get the kinematic analysis seven ProReflex MCU-240(Motion Capture Unit), infrared rays cameras, which was produced by Qualisys, were used to get a two-dimensional coordinate. Following are the analysis result from kinematic factors such as time element, speed element and angular element. 1. During position of ground wrestling, the average necessary time until defender's hip joint touches the mat for Phase1 was $0.34{\pm}0.14sec$ at side position was the shortest space of time out of three types, and Phase2 was $0.21{\pm}0.02sec$ at front position was the shortest space of time out of three types. Moreover, side defence position was the shortest for total average necessary time with $0.78{\pm}0.05sec$. 2. The movement change for hip joint was $57.21{\pm}20.17cm$ for front, $43.35{\pm}7.13cm$ for rear, and $18.67{\pm}10.24cm$ for side at Phase1 and $42.08{\pm}17.56cm$ for side, $16.61{\pm}6.34cm$ for front, and $1.48{\pm}1.29cm$ for rear at Phase2. 3. Movement speed of hip joint at defensive type were most effective in success and fail rate at Phase 1 and its frontal average speed was fastest with $1.01{\pm}0.23m/s$ following by $0.52{\pm}0.15m/s$ for side, and $0.62{\pm}0.15m/s$ for rear. The average for total change of speed is $0.79{\pm}0.32m/s$ for front, $0.78{\pm}0.17m/s$ for side, and $0.49{\pm}0.08m/s$ for rear. 4. The joint angle gets smaller in a order by rear, front, and side for the size of hip joint angle and knee angle for different defensive type. 5. As a result of one-way ANOVA on linear velocity for hip joint in frontal defence(phase1) was significance ($\alpha$=.05), but phase 2 was not significance. Synthetically, analyzing on differences among three different defence types which were front, rear, and side of the body lock technique in the ground wrestling, front defensive type was the most effective. In future, there should be more studies regarding on defence at not a laboratory study but a field study to help out wrestler to pertinent techniques to improve the game of wrestling.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.