• Advances in environmental research
• /
• 제5권3호
• /
• pp.189-200
• /
• 2016

This study aimed at advanced oxidation of hetero tri-functional reactive dye Acid orange 7 using photo-Fenton conditions in a lab-scale experiment. Decolourisation of Acid Orange 7 dye by Fenton's process was dependent on concentration of Hydrogen peroxide, Ferrous sulphate, pH, and contact time. A $2^3$ factorial design was used to evaluate the effects of these key factors: pH, Fe(II), and $H_2O_2$ concentration, for a dye concentration of 50 mg/L with COD of 340 mg/L at pH 3.0. The response function was removal of colour under optimised conditions; pH 3.0, [Fe(II)] 40.83 mg/L, [$H_2O_2$] 4.97 mmol/L; 13.6 min. of treatment resulting in 100% colour removal. The final COD of treated wastewater was nil suggesting that AOP is a potentially useful process of color removal and dye degradation/mineralisation of effluent having AO7. Minimum contact time for complete decolourisation was at 5 mmol/l $H_2O_2$ concentration. Increase in $FeSO_4$ (mg/l) concentration resulted in decrease of time for complete decolourisation. Box-Behnken Design was used to optimize the process variables. Maximum and minimum levels of pH (3-5), $H_2O_2$ (4-6 mmol/l), $FeSO_4$ (30-46 mg/l) and contact time (5-15 minutes) were used. The statistical analysis revealed a value of 0.88 for coefficient of regression ($R^2$) indicating a good fit of model. Calculated F-value was found higher than the tabulated value confirming to significance of the model. Based on student's t-test, Ferrous sulphate, pH, and contact time have a positive effect on the percent decolourisation of Acid Orange 7.

• 디지털콘텐츠학회 논문지
• /
• 제18권2호
• /
• pp.403-410
• /
• 2017

본 논문에서는 스마트 NFC 통신과 실시간 소화기 압력 측정을 이용한 소화기 유지관리 및 모니터링 시스템을 제안하였다. 제안하는 시스템 구성은 소화기를 식별하기 위해 스마트 기기와 소화기용 모듈 간 NFC 통신으로 인식하는 단계, 소화기의 외관 점검과 실시간 소화기 압력 측정 단계 및 소화기 점검 상태 정보를 관리서버로 전송하고 관리 프로그램에서 통합 관리하는 단계로 구성된다. 특히 스마트 기기를 이용한 실시간 소화기 압력 측정은 정상 압력을 의미하는 녹색 영역과 색상 패턴 기반 검출된 지시바늘의 위치 각도간의 거리 계산으로 최종 압력을 검출하였다. 실험 결과, 제안하는 소화기 유지관리 시스템이 설계 규격대로 수행됨을 확인할 수 있었고, 제안하는 시스템은 관리자가 효과적으로 소화기 안전 점검 상태 정보를 통제할 수 있는 결과를 보였다.

• Restorative Dentistry and Endodontics
• /
• 제28권5호
• /
• pp.402-408
• /
• 2003

This study was done to present a criterion in selection of the most proper light sources and materials by measuring metamerism index(MI) of the light curing composite resins with spectrocolorimeter. Metamerism is defined when two objects appear to be the same color in one illuminant but different in another. This is due to the fact that they have different spectral curves that fail to match under the second illuminant. In this study, A1 & A3 shade of five light curing composite resins (Esthet-X, Filteck Z250, Filteck A110. Charisma. Vitalescence) were chosen based on Vita shade. Five samples were made for shade of each product with Teflon mold (diameter: 15mm, thickness: 2mm). Metamerism index of each samples on a Barium sulfate plate($L^{*}=96.54,{\;}a^{*}=0.19,{\;}b^{*}=0.01$) prepared for sample fixation were measured with spectrocolorimeter(Miniscan XE plus. Model 4000s. Hunter Lab. USA) by applying standard light source D^{65}, C. Fcw, TL84 and A. Standardization was done with reference standard(X=80.8, Y=85.7, Z=90.8) and light trap. The results were as follows. 1. Different resins with same Vita shade showed recognizable color difference (${\delta}E^{*}>2$). 2. All composites had MI below accepted value 0.5 between standard illuminant(D$_{65}$, C, & A) and below 1.5 under fluorescent condition (Fcw & TL84). 3. MI value between $D^{65}$ and A showed higher value than MI value between other source of light(p<0.01). 4. All resins except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).except Z250 showed MI value that A3 is higher than A1 between $D^{65}$ and A(p<0.05).

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.8-14
• /
• 2020

Recently, there was an increasing demand for an integrated access control system which is capable of user recognition, door control, and facility operations control for smart buildings automation. The market available door lock access control solutions need to be improved from the current level security of door locks operations where security is compromised when a password or digital keys are exposed to the strangers. At present, the access control system solution providers focusing on developing an automatic access control system using (RF) based technologies like bluetooth, WiFi, etc. All the existing automatic door access control technologies required an additional hardware interface and always vulnerable security threads. This paper proposes the user identification and authentication solution for automatic door lock control operations using camera based visible light communication (VLC) technology. This proposed approach use the cameras installed in building facility, user smart devices and IoT open source controller based LED light sensors installed in buildings infrastructure. The building facility installed IoT LED light sensors transmit the authorized user and facility information color grid code and the smart device camera decode the user informations and verify with stored user information then indicate the authentication status to the user and send authentication acknowledgement to facility door lock integrated camera to control the door lock operations. The camera based VLC receiver uses the artificial intelligence (AI) methods to decode VLC data to improve the VLC performance. This paper implements the testbed model using IoT open-source based LED light sensor with CCTV camera and user smartphone devices. The experiment results are verified with custom made convolutional neural network (CNN) based AI techniques for VLC deciding method on smart devices and PC based CCTV monitoring solutions. The archived experiment results confirm that proposed door access control solution is effective and robust for automatic door access control.

• 마케팅과학연구
• /
• 제20권3호
• /
• pp.239-248
• /
• 2010

本文阐述了产业和学术之间的合作项目. 这个合作项目关注美国东北部的一家大型地区连锁百货商店的两个自有品牌服装的营销和产品开发战略发展. 这个项目的目标是通过和学生的想法的合作来振兴产品线. 从而给学生提供真实产业环境中的实践经验. 这个项目中有很多关键者. 在美国东北部的一家私有连锁百货商店为已有的两个自有服装品牌寻求一个学术伙伴. 他们的目标客户是追求休闲, 适中价格的中年消费者. 这个公司想要改变包装和展示的方向, 甚至是产品的设计. 公司的品牌和产品开发部门联系东北一个州立大学的学术部门的教授. 有两位教授认为这个项目非常适合他们的课程-一个是初级的媒介品牌管理课程; 一个是高级的时装产品开发课程. 这些教授认为通过合作项目, 学生在安全的学术学习环境中能进入一个真实的工作场景中在一个多学科协作团队, 提供超出一个学生的能力, 经验和资源优势, 并增加了解决问题的过程中的 "智囊" (Lowman 2000). 这种提高学生的能力目标的方向让每班教师去组织品牌和产品开发类的跨学科团队. 此外, 许多大学都聘请科研和教学的产业伙伴关系, 协作的时间(学期)和环境(教室/实验室)的约束有助于提高学生的知识和对现实世界的经验. 在田纳西大学, 产业服务中心和UT-Knoxville's 工学院和一家公司合作来发展它们美国公司的的设计进步. 本研究中, 因为是和一个自有商标零售品牌, Wickett, Gaskill 和Damhorst's (1999) 指出产品开发和品牌管理团队使用的零售服装产品开发模型. 之所以选择这个框架是因为它从零售这个角度强调了服饰产品开发. 两个班级参与了这个项目: 一个初级品牌管理班级和一个高级时装产品开发班级. 7个团队包括四名学习品牌管理的学生和两名学习产品开发的学生. 这两个课程在同一个学期但是不同的时间. 在学期开始的时候, 每个班级都被介绍给了产业合作伙伴并接受了问题. 一半的团队指定为男士品牌, 另一半是女士品牌. 这些小组负责制定解决问题的方法, 制定自己的工作时间表, 在与业界代表保持接触, 并确保每个小组成员以积极的方式负责任. 这些小组的目标是通过用销售规划进程来计划, 发展和展示一条产品线(遵循Wickett, Gaskill和Damhorst 模型) 并为这条产品线发展新的品牌战略. 这些小组展示了趋势, 色彩, 面料和目标市场调查; 制定一个产品线的草图;编辑了草图, 介绍他们的执行计划书写说明书, 配上合适的模型并最终开发生产样品. 品牌班的学生完成了SWOT分析, 品牌测量研究报告, 品牌心智图和完整综合的营销报告. 这些报告在介绍新产品线时同时发表. 将来如果有更多这样的协作机会而且公司希望同时考虑品牌和产品开发战略, 那么课程应该定在相同的时间, 这样学生有更多的时间在一起讨论时间表和被分配的任务. 像上面的任务, 学生不得不每堂课之外的时间见面. 这使得团队工作变得具有挑战性(Pfaff和Huddleston, 2003). 虽然这项工作的后勤是费时设立和管理, 但教授认为对学生的好处是多种多样的. 根据两堂课的学生的回复, 最重要的好处是和产业专业人士一起工作的机会, 跟进他们的进程, 并看到公司里做决定级别的高层对他们作品的评估. 教员们都感激有一个 "真实的世界" 的案例. 制定的创意和战略扩大和加强了品牌和产品开发两个部门的联系. 通过和来自不同知识领域的学生一起工作并且和产业伙伴联系, 遵守产业活动的框架和时间表, 学生小组在新的环境中完成优秀创新的作品是具有挑战性的. 在产品开发和为 "现实生活" 品牌的品牌工作, 这些品牌都在努力给学生一个机会, 看看他们的课程是如何紧密的与现实世界联系, 以及公司运营中设计和商业方面如何需要创造性, 协作和灵活性. 行业人员对(a)学生的知识水平和深度以及执行力, (b)品牌的新思路的创造性产生了深刻的印象.