• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.8
• /
• pp.29-37
• /
• 2019

Textile quality management targets the physical properties of fabrics and the subjective discriminations of color and fitting. Color is the most representative quality factor that consumers can use to evaluate quality levels without any instruments. For this reason, quantification using a color discrimination device has been used for statistical quality management in the textile industry. However, small and medium-sized domestic textile manufacturers use only visual inspection for color discrimination. As a result, color discrimination is different based on the inspectors' individual tendencies and work procedures. In this research, we want to develop a textile industry-friendly quality management method, evaluating the possibility of rapid color discrimination using a digital imaging device, which is one of the office-automation instruments. The results show that an imaging process-based color discrimination method is highly correlated with conventional color discrimination instruments ($R^2=0.969$), and is also applicable to field discrimination of the manufacturing process, or for different lots. Moreover, it is possible to recognize quality management factors by analyzing color components, ${\Delta}L$, ${\Delta}a$, ${\Delta}b$. We hope that our rapid discrimination method will be a substitute technique for conventional color discrimination instruments via elaboration and optimization.

• Journal of the Korean Society of Costume
• /
• v.65 no.7
• /
• pp.47-59
• /
• 2015

This paper studies the conservation treatment of Lady Shim's costume, which was excavated in Jecheon Province in 2012. There were the significant problems, which were encountered in the treatment of the costume ; First the Jeogoris were transformed during the excavation, Second fibers were seriously deteriorated, Third most of the fabrics such as Chusa were readily deformed. To overcome these problems and to secure stability in the conservation treatment, we decided to alternate between two different washing methods ; dry cleaning by n-hexane and wet cleaning by water. The costume shape was recovered by steaming and by swelling with Hanji(Korean traditional paper). The combined cleaning method proved to be relatively efficient and stable. In addition, the shape of Chusa was well preserved by dry cleaning.(using n-hexane also solved the problem of bad smell after washing with organic solvents.) The effects of the conservation treatment on the excavated costumes could be seen in the change of Lab color difference. Washing made the distribution of Lab color difference narrower, which may suggest that the impurities on the fiber was removed by washing. In addition, the value of L was greater than a-value and b-value after the treatment. This result indicates that the change of value represents the change of color difference by cleaning.

• Journal of Broadcast Engineering
• /
• v.13 no.1
• /
• pp.109-118
• /
• 2008

In mapping a texture image into a 3D mesh model for photo-realistic graphic applications, the compression of texture image is as important as geometry of 3D mesh. Typically, the size of the (compressed) texture image of 3D model is comparable to that of the (compressed) 3D mesh geometry. Most 3D model compression techniques are to compress the 3D mesh geometry, rather than to compress the texture image. Well-known image compression standards (i.e., JPEG) have been extensively used for texture image compression. However, such techniques are not so efficient when it comes to compress an image with texture patches, since the patches are little correlated. In this paper, we proposed a preprocessing method to substantially improve the compression efficiency of texture compression. From the experimental results, the proposed method was shown to be efficient in compression with a bit-saving from 23% to 45%.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.39 no.2
• /
• pp.117-125
• /
• 2013

In this study, The stability of a cream containing the ethyl acetate fraction of 50% ethanol extracts from Glycyrrhiza uralensis (G. uralensis) cultured in Korea was investigated. pH, absorbance, viscosity and color difference of the cream containing 0.20% ethyl acetate fraction of the aforementioned G. uralensis extracts were measured under 4 different temperature conditions ($4^{\circ}C$ $25^{\circ}C$ $37^{\circ}C$ and $45^{\circ}C$) and under the sun light at 2 week intervals for 12 weeks. pH changes of a control cream without the extracts and the sample cream containing 0.20% ethyl acetate fraction of G. uralensis extracts were 0.66 and 0.44, respectively. There were no significant pH differences between the sample and the control under the sun. Viscosities of the control cream and the sample cream decreased by 2,483 cPs and 2,893 cPs respectively. So, the sample cream showed a bigger decline (410 cP) in viscosity than the control cream. The ethyl acetate fraction of G. uralensis extracts did not affect the stability of the cream. Absorbance of ethanol solution of the ethyl acetate fraction decreased 30.00% at 276 nm under the sun. On the other hand, the absorbance of the sample cream containing the ethyl acetate fraction decreased 12.02%. The stability of the G. uralensis extracts was better in cream formulation than in ethanol solution. The total color differences of all creams increased slightly during the study period under various conditions. The results appeared to indicate the color stability of the cream containing 0.20% ethyl acetate fraction of G. uralensis extracts. It is suggested that further study is needed to provide more information to the manufacturers who are seeking for the application of the G. uralensis extracts to improve the anti-oxidant and stability of cosmetic products.

• Journal of Broadcast Engineering
• /
• v.15 no.3
• /
• pp.380-390
• /
• 2010

The most recent standard video codec, H.264/AVC achieves significant coding efficiency by using a rate-distortion optimization(RDO). The RDO is a measurement for selecting the best mode which minimizes the Lagrangian cost among several modes. As a result, the computational complexity is increased drastically in encoder. In this paper, a method for fast intra prediction mode decision is proposed to reduce the RDO complexity. To speed up Intra$4{\times}4$ and Chroma Intra encoding, the proposed method decides the case that MPM (Most Probable Mode) is the best prediction mode. In this case, the RDO process is skipped, and only MPM is used for encoding the block in Intra$4{\times}4$. And the proposed method is also applied to the chroma Intra prediction mode in a similar way to the Intra$4{\times}4$. The experimental results show that the proposed method achieves an average encoding time saving of about 63% with negligible loss of PSNR (Peak Signal-to-Noise Ratio).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.382-389
• /
• 2019

A novel folding process is proposed using a repeated cold-die forging and annealing to form a sterling silver ring. Sterling silver plate was cut into a doughnut shape, and lattices with 0.43-mm line-width were imprinted on it. The sample was folded by forging using dies with slopes of $45^{\circ}$, $60^{\circ}$, and $75^{\circ}$ and annealing. For comparison, samples were also fabricated without annealing. Strain was identified by measuring the length of lattices. Vernier calipers, a Vickers hardness tester, an optical microscope, and a UV-VIS colorimeter were used to determine the size, hardness, microstructure, and body color. Without annealing, cracks occurred. However, successful deformation was possible when annealing was used. The results of macro strain measurements show that the outer diameter and width decreased, while the inner diameter and thickness increased after the final process. The maximum strain was increased 0.128 toward the parallel direction. The Vickers hardness decreased after annealing and increased after the folding process. The microstructure results showed that the grain size increased after annealing but decreased after folding. The color difference based on the Lab index was under 10 for all processes. Eventually, a doughnut-shaped silver plate was successfully deformed into a ring shape by the folding process.