• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.434-440
• /
• 2003

The powders of L $a_{0.8}$C $a_{0.2}$Mn $O_3$ Colossal Magnetoresistance (CMR) materials were synthesized by sol-gel process. Lanthanum(H), Calcium(II) and Manganese(III) 2,4-Pentanedionate were dissolved in a mixed binary solution consisted of propionic acid and methanol with PEG (15 wt%) aqueous solution. The progress of reactions was monitored by FT-IR spectroscopy. The Lao scao.2Mn03 gel powders were annealed at various temperatures. The structural changes were investigated by FT-IR, CP/MAS $^{ 13}$C solid state NMR spectroscopy and XRD. The thermochemical property, particle characterization, microstructure of sintered sample, and cation composition of gel powder were studied by TG/DTA, FE-SEM and ICP-AES. The magnetic characterizations were identified through measurement of magnetic moment by VSM.

• The korean journal of orthodontics
• /
• v.28 no.5 s.70
• /
• pp.763-774
• /
• 1998

The purpose of this study was to evaluate the morphology of mandibular symphysis and location of lower incisor under the influence of the craniofacial skeleton in skeletal Class III malocclusion. The sample consisted of 132 adults who have severe Class III malocclusion(prognathism group, 33 males and 33 females), and who have normal occlusion(normal group, 33 males and 33 females). They had not received any orthodontic treatment or orthognathic surgery. The lateral cephalograms were evaluated. The results were as follows : 1. Prognathism group were larger than normal group in comparison of facial skeleton (p<0.05) with the exception of ${\angle}FH-Pal$, ${\angle}SNA$. 2. In the morphology of symphysis, measurements of anteroposterior width(LaABBW, LiABBW, SW) of prognathism group were significantly less than that of normal group(p<0.001). 3. In the correlative analysis between the craniofacial skeleton and symphysis measurements of prognathism group, vertical measurements in relation with cranial base and mandibular plane showed reverse correlationship with anteroposterior width of symphysis(LiACBW, LaACBW, LiABBW, SW)(p<0.05). But, there was not distinct difference between horizontal skeletal measurements and symphysis measurements(p>0.05). 4. The probability by regression test between vertical measurements(${\angle}SN-Mn,\;{\angle}FMA,\;{\angle}Pal-Mn,\;{\angle}LFH$) and symphysis measurements(LiACBW, LiABBW, SW, ${\angle}LISA$) were very high(p<0.001).

• Journal of the Korean Chemical Society
• /
• v.61 no.5
• /
• pp.231-237
• /
• 2017

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was $1277.1m^2{\cdot}g^{-1}$, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to $0.53mmol{\cdot}g^{-1}$, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, AC-P700 possesses better regeneration ability and reusability.

• Journal of the Korean Ceramic Society
• /
• v.40 no.12
• /
• pp.1189-1196
• /
• 2003

Ferroelectric B $i_{3.25}$L $a_{0.75}$ $Ti_3$ $O_{12}$ (BLT) solution was synthesized by sol-gel process. BLT thin films were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. In this experiments, Bi(TMHD)$_3$, La(III)2-Methoxyethoxide, and Ti(IV) i-propoxide were used as starting materials, which were dissolved in 2-Methoxyethanol. Rapid Thermal Annealing (RTA) was used to promote crystallization of BLT thin films. The thin films with RTA process were compared with those with non-RTA process on electrical properties. After RTA process, the remanent polarization value (2Pr) of BLT thin films annealed at 72$0^{\circ}C$ was 20.46 $\mu$C/$\textrm{cm}^2$ which was approximately 27% higher than that of non-RTA process at 5 V.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.594-602
• /
• 2011

The effect of ${\alpha}$-, ${\beta}$- and ${\gamma}$-picolines on the stereochemistry of the coordination compounds of lanthanide(III) nitrates derived from 4[N-(furfural)amino]antipyrine semicarbazone (FFAAPS) has been studied. The general composition of the present coordination compounds is [Ln(FFAAPS)$(NO_3)_3$Pic] (Ln=La, Pr, Nd, Sm, Gd, Tb, Dy or Ho and Pic=${\alpha}$-, ${\beta}$- or ${\gamma}$-picolines). All these coordination compounds have been characterized by elemental analyses, molecular weight, molar conductance, magnetic susceptibility, infrared and electronic spectra. The infrared studies suggest that the FFAAPS behaves as a neutral tridentate ligand with N, N, O donor while ${\alpha}$-, ${\beta}$- or ${\gamma}$-picoline is coordinated to the lanthanide(III) ions via heterocyclic N-atom. Nitrates are bicovalently bonded in these compounds. From the electronic spectral data, nephelauxetic effect (${\beta}$), covalence factor ($b^{1/2}$), Sinha parameter (${\delta}%$) and the covalence angular overlap parameter (${\eta}$) have been calculated. Thermal stabilities of these complexes have been studied by thermogravimetric analysis. The coordination number of lanthanide(III) ions in the present compound is found to be ten. The antibacterial studies screening of the primary ligand FFAAPS and the complexes showed that the present complexes have moderate antibacterial activities.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3777-3787
• /
• 2012

Three kinds of 3D isomorphous and isostructural coordination polymers, namely, $\{[Ln_2(PDA)_3(H_2O)_3]{\cdot}0.25H_2O\}_{\infty}$ (Ln = La(1), Sm(2), and Gd(3)) ($PDA^{2-}$ = pyridine-2,6-dicarboxylate anion) have been synthesized under hydrothermal conditions and characterized by elemental analyses, IR spectroscopy, thermal analyses and single crystal X-ray diffraction. In these MOFs, Ln(III) centers adopt eight-coordinated and nine-coordinated with the $N_1O_7$ and $N_2O_7$ donor sets to construct distorted trianglar dodecahedron geometry and tricapped trigonal prism configurations, respectively. Based on the building block of tetranuclear homometallic $Ln_4C_4O_8$ unit (16-membered ring), 1-3 are connected into highly ordered 2D sheets via O-C-O linkers and further constructed into 3D architectures through hydrogen bonds. Crystallographic parameters suggest that the lanthanide contraction effect exist in these coordination polymers. Luminescent properties of the lanthanide-based MOFs (metal-organic frameworks) have been measured at room temperature, which reveal that they presenting ionselective characters toward certain metals, such as $Mg^{2+}$, $Cd^{2+}$ and $Pb^{2+}$ ions.

• Journal of the Korean Ceramic Society
• /
• v.28 no.8
• /
• pp.603-610
• /
• 1991

An oxygen deficient perovskite (CaLa)(MgMn)O5.43, with the cubic unit cell parameter of 3.826$\AA$, was prepared 115$0^{\circ}C$ for 10 hrs under the ambient oxygen gas pressure. The average oxidation state of manganese was determined to be 3.86 by the iodometric titration, so that the perovskite could be formulated as (CaLa) ({{{{ { MgMn}`_{ chi } ^{II } }}{{{{ { Mn}`_{ y} ^{III } }}{{{{ { Mn}`_{1- chi -y } ^{IV } }})O5.43 (2x+y=0.14). From X-ray photoelectron spectroscopy, the manganese ions in the lattice are mostly tetravalent, but two paramagnetic configurations were observed in the EPR spectrum: One sharp isotropic signal with hyperfines (ΔH 50 G, g=1.997$\pm$0.002 and │A│=82(4)$\times$10-4 cm-1) and a broad isotropic one (ΔH 1600 G, g=1.994$\pm$0.002), those which correspond respectively to Mn(II) and Mn(IV) ions. According to the magnetic susceptibility measurement, it follows the Curie-Weiss law from 20 K up to room temperature with $\mu$eff=5.23 $\mu$B, which is relatively larger than spin-only value({{{{ { mu }`_{eff} ^{s.o } }}=4.04 $\mu$B) due to the effect of weak ferromagnetic coupling. Such a result is in accord with a theory of semicovalence exchange.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.2
• /
• pp.372-376
• /
• 2008

The hydrolysis of gallium(III) has been studied using potentiometric techniques under physiological conditions of temperature 37 C and ionic strength 0.15 moldm-3 NaCl and at different metal ion concentrations. Changes in pH were monitored with a glass electrode calibrated daily in hydrogen ions concentrations. The titration data within the pH range of 2.5-9.99 were analyzed to determine stability constants of hydroxide species using the SUPERQUAD program. Several different species were considered during the calculation procedure and the following hydroxides have been characterized: Ga(OH)3, Ga(OH)4- Ga3(OH)112-, Ga4(OH)11+ and Ga6(OH)153+. Speciation calculations based on the determined constants were then used to simulate the species distribution.

• Journal of the Korean Ceramic Society
• /
• v.24 no.2
• /
• pp.123-132
• /
• 1987

Yttria-stabilized zirconia with erbia-lanthana were investigated with respect to the amount of Ln2O3 (Ln; Er, La) addition in the range of 0.5∼5 mol% to the base composition of 8 mol% yttriazirconia. Following analysis and measurement were adopted for the characterization of synthesizes of solid electrolyte; phase transformation, lattice parameter, crystallite size, relative density, chemical composition and SEM/EDS. Electrical conductivity by two-probe method versus temperature from 350$^{\circ}C$ to 800$^{\circ}C$ and frequency in the range of 5Hz∼13MHz by complex impedance method was also conducted together with the determination of oxygen ion transference number by EMF method for the evaluation of their electrical properties. The results were as followsing; Electrical conductivity were decreased with increase in Ln2O3 content, but their activation energies increased. In the case of La2O3 addition, espicially, its electrical conductivity was decreased owing to the segregation of second phases at the grain-boundary. Grain-boundary conductivity of the specimen contained 0.5 mol% Er2O3 exhibited a maximum conductivity among thecompositions experimented. However, their bulk conductivities decreased in both case. Oxygen ion transference number was also reduced with decrease in oxygen partial pressure. For example, in the case of Er2O3 addition it retained value in the range of 0.97∼0.94 abvove 4.74${\times}$10-2in oxygen partial pressure. With the increase in the quantities of the evaporation of additive components, the crystallite size of stabilized zirconia decreased, and their relative density also reduced owing to the formation of porosity in their matrices. In the case of La2O3 the sinterbility was improved in the limited amount of addition up to 0.5 mol%, in the same range of addition the strength of sintered bodies were improved perhaps owing to the precipitation of metastable tetragonal phase in the fully stabilized zirconia.

• Macromolecular Research
• /
• v.11 no.5
• /
• pp.297-302
• /
• 2003

The imidization and cure reaction of a thermosetting phenylethynyl-terminated amic acid (LaRC PETI-5) in film form have been monitored as a function of temperature by means of a steady-state fluorescence technique using a front-face illumination method. The variation of the fluorescence emission spectra of LaRC PETI-5 can be divided into four temperature regions; Region I: below 15$0^{\circ}C$, Region II: 150-25$0^{\circ}C$, Region III: 250-35$0^{\circ}C$, and Region IV: above 35$0^{\circ}C$. The fluorescence spectra in Region I are largely influenced by residual N-methyl-2pyrrolidinone in the polymer and also slightly by partial imidization of the polymer. There is a combined effect of imidization and solvent removal on the fluorescence behavior in Region II. The spectra in Regions III and IV are due significantly to the cure reaction of LaRC PETI-5 and to a post-cure effect of the polyimide, respectively. This spectroscopic evidence indicating the transformation of the amic acid imide oligomer into the corresponding polyimide via imidization and cure, agrees well with thermal analysis results obtained previously. The intermediate stage of cure in the range of 250-30$0^{\circ}C$ predominantly influences the change of the fluorescence intensity. The later stage above 30$0^{\circ}C$ significantly influences the position of the spectrum. This fluorescence study also supports the mechanism proposed in earlier work that the crosslinking reaction takes place at the reaction sites in the conjugated polyene and the phenylethynyl end group in the polyimide chain.