• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2022년도 추계학술대회
• /
• pp.74-74
• /
• 2022

본 연구는 붉나무의 기능성 성분의 산업화 활용을 위한 고품질의 붉나무 1년생 용기묘 대량생산을 위해 실시되었다. 붉나무 1년생 용기묘의 묘목품질의 향상을 위해 다양한 농도의 시비처리하여 우량묘 생산에 적합한 시비수준을 구명하고자 하였다. 시비실험은 무시비구 포함하여 수용성 복합비료 (N:P:K=20:20:20, v/v)를 1,000mg·L^-1, 2,000mg·L^-1, 3,000mg·L^-1 수준으로 실시하였다. 시비처리는 붉나무 용기묘의 간장과 근원경 생장은 1,000mg·L^-1 시비처리구에서 생장이 가장 좋게 나타났으며 시비수준이 증가할수록 감소하는 경향을 보였다. 뿌리형태 특성분석에서도 전체뿌리길이, 투영단면적, 표면적 및 뿌리부피가 간장과 근원경 생장과 동일한 경향을 보이는 것으로 조사되었다. 건물 생산량은 부위별 잎, 줄기, 뿌리 및 전체가 모두 1,000mg·L^-1 시비처리구에서 가장 높았으며, 그 이상의 시비수준에서는 점점 감소하는 경향을 보였다. H/D(Hight/Root collar diameter)율은 전체가 3.82(무시비구) ~ 4.90, T/R(Top/Root)율은 전체가 0.56(1,000mg·L^-1 시비처리구) ~ 0.82로 조사되었다. 시비처리 에 의한 붉나무의 LWR(Leaf dry weight ratio)은 무시비구, SWR(Shoot dry weight ratio)은 3,000mg·L^-1 시비처리구, 그리고 RWR(Root dry weight ratio)은 1,000mg·L^-1 시비처리구에서 유의적 차이를 보이며 높게 나타났다. 묘목품질지수(QI)의 경우 1,000mg·L^-1 시비처리구에서 12.13으로 다른 시비수준들보다 월등히 높았다. 본 실험의 결과를 종합하면, 뿌리발달이 좋은 우량한 붉나무 생산에 적절한 시비수준은 1,000mg·L^-1 정도인 것으로 판단된다.

• Nuclear Engineering and Technology
• /
• 제44권3호
• /
• pp.249-260
• /
• 2012

Main focus of the combined nuclear research activities at Aachen University (RWTH) and the Research Center J$\ddot{u}$lich (J$\ddot{U}$LICH) is the experimental and analytical investigation of containment phenomena and processes. We are deeply convinced that reliable simulations for operation, design basis and beyond-design basis accidents of nuclear power plants need the application of so-called lumped-parameter (LP) based codes as well as computational fluid dynamics (CFD) codes in an indispensable manner. The LP code being used at our institutions is the GRS code COCOSYS and the CFD tool is ANSYS CFX mostly used in German nuclear research. Both codes are applied for safety analyses especially of beyond design accidents. Focal point of the work is containment thermal-hydraulics, but source term relevant investigations for aerosol and iodine behavior are performed as well. To increase the capability of COCOSYS and CFX detailed models for specific features, e.g. recombiner behavior including chimney effect, building condenser, and wall condensation are developed and validated against facilities at different scales. The close connection between analytical and experimental activities is notable and identifying feature of the RWTH/J$\ddot{U}$LICH activities.

• 한국초지조사료학회지
• /
• 제8권1호
• /
• pp.55-60
• /
• 1988

A two year's field experiment was conducted on newly reclaimed saline tidal lands to measure the effects of sand mulching on salinity of the soils and their relationship to crop performance. Hybrid sorghum cv. Pioneer 931 was grown under different mulching treatments using of medium sand and red earth (Fine loamy, Typic Hapludults). Salinity in the root zone was decreased markedly under soil mulching using of medium sand, especially during the dry season, and it caused a great increase in the root growth and R/T ratio. Seasonal values of electrical conductivity at sand mulching were 6.6 in April and 1.6 mmhos in August, but it was still high with a concentration of 12.7 (April) and 3.8 mmhos (August) in untreated check plot. Sand mulching increased plant growth and the rate of dry matter accumulation. However, treatment of red earth additionally over sand mulching produced lower dry matter yield than those of soil mulching using of medium sand only. Under salt stress sorghum plant showed a decrease in the leaf weight ratio (LWR) and it resulted in a low concentration of crude protein of the plant. Sand mulching enhanced leaf weight ratio and rate of protein synthesis.

• Tribology and Lubricants
• /
• 제31권5호
• /
• pp.189-194
• /
• 2015

This paper focuses on the conformal contact problem. A typical example of conformal contact is the contact between a pin and hole. In particular, this paper focuses on the condition for assuming a contact stress field to be a Hertzian pressure profile by using well-known classical solutions associated with Hertzian contact. Persson first developed the conformal contact analysis method around half a century ago, but there have been no significant improvements since then. The present research also adopted this method, but developed new solutions from the viewpoint of application to structural design. The analysis began with a comparison between Persson°Øs conformal contact stress and the Hertzian stress fields. The next step was to check the differences in the normalized stress values of both. This study used the tolerance for the difference in the peak stresses of Persson°Øs solution and the Hertz solution to validate the Hertzian assumption. This gave the range for the difference in radii of the pin and hole when the contact force and mechanical properties of the material are specified. The results showed that, at a tolerance of 5%, the Hertzian assumption is valid if half of the contact angle is less than 35°ý. In addition, the Hertzian assumption holds even for a relatively long contact length, in contrast to the general incomplete contact problem. This paper discusses these results along with other aspects of the application to the design.

• 한국압력기기공학회 논문집
• /
• 제12권1호
• /
• pp.11-16
• /
• 2016

Fuel assembly's mechanical characterization test facility (FAMeCT) in KAERI was constructed with upgraded functional features such as increased loading capacity, underwater vibration testing and severe earthquake simulation for extended fuel design guideline. This facility is designed and developed to provide out-pile fuel data for accident analysis model and fuel licensing. Functional tests of FAMeCT were performed to confirm functionality, structural integrity, and validity of newly-built fuel assembly mechanical test facility. Test program includes signal check of data acquisition system, load delivering capacity using real-sized fuel assemblies and a standard loading cylindrical rigid specimen. Fuel assembly's lateral bending test was carried out up to 30 mm of pull-out displacement. Limit case axial compression loading test up to 33 kN was performed to check structural integrity of UCPS (Upper Core Plate Simulator) support frame. Test results show that all test equipment and measurement system have acceptable range of alignment, signal to noise ratio, load carrying capacity limit without loss of integrity. This paper introduces newly constructed fuel assembly's mechanical test facility and summarizes results of functional test for the mechanical test equipment and data acquisition system.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.1109-1114
• /
• 2009

The evolution of a high burnup structure (HBS) in a light water reactor (LWR) $UO_2$ fuel was simulated using the Potts model. A simulation system for the Potts model was defined as a two-dimensional triangular lattice, for which the stored energy was calculated from both the irradiation damage of the $UO_2$ matrix and the formation of a grain boundary in the newly recrystallized small HBS grains. In the simulation, the evolution probability of the HBS is calculated by the system energy difference between before and after the Monte Carlo simulation step. The simulated local threshold burnup for the HBS formation was 62 MWd/kgU, consistent with the observed threshold burnup range of 60-80 MWd/kgU. The simulation revealed that the HBS was heterogeneously nucleated on the intergranular bubbles in the proximity of the threshold burnup and then additionally on the intragranular bubbles for a burnup above 86 MWd/kgU. In addition, the simulation carried out under a condition of no bubbles indicated that the bubbles played an important role in lowering the threshold burnup for the HBS formation, thereby enabling the HBS to be observed in the burnup range of conventional high burnup fuels.

• 천문학논총
• /
• 제15권spc1호
• /
• pp.133-145
• /
• 2000

Symbiotic stars are known as binary systems with both cool and hot components with enshrounding nebulous gas. The cool component, M-type giant, is presumably loosing its mass into a hot white or main sequence companion star through the inner Lagrangian point. The lines emit from the ionized nebulous region around the hot star while the mass loss or accretion activity is believed to be the main cause of sudden variation of the continuum and line fluxes. We selected 17 symbiotics for which the emission line fluxes were measured from the IUE SWP, LWR data, to find variability of spectrum. We also investigated the periodic variation of emissions or eclipsing effect from the IUE lines. All of our symbiotics show very high electron densities in the emission regions. For other optical symbiotics, the observations had been carried in 1999 with BOAO mid-resolution spectrometer. We classified symbiotics based on their outburst activities, or emission line characteristics, i.e., $OVI{\lambda}6830.\;The\;OVI{\lambda}6830$ emission lines are also found in S-type symbiotics, which have been known as charateristics of D-types.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1990년도 추계학술대회논문집; 한양대학교, 서울; 24 Nov. 1990
• /
• pp.113-124
• /
• 1990

Tap lines are small branch piping generally less than two inches in diameter. They typically branch off of header piping having a much larger diameter. An example of a common tap line is a 3/4 inch size high point vent or low point drain. Most tap lines have at least one valve near the header tap connection to provide isolation. Two valves are often required for double isolation. A light water reactor(LWR) nuclear power plant will have several hundred tap lines. These lines come in many sizes and shapes and serve numerous functions. A single process piping valve may have three different tap lines associated with it (figure 1). Table 1 delineates the different categories of tap lines. Vibration failures of tap lines are a common occurrence in all industrial plants including nuclear and fossil power plants. These types of failures constitute a significant percentage of all piping related failures. An unscheduled plant shutdown or outage resulting from the failure of a tap line decreases plant reliability and may have a detrimental effect on plant safety. Most tap line vibration failures can be avoided through the use of appropriate routing and support techniques. Standardized designs can be developed for use in a myriad of applications. These designs will not only minimize failures but will also reduce the necessary analysis and installation efforts.

• Nuclear Engineering and Technology
• /
• 제33권5호
• /
• pp.526-538
• /
• 2001

Fatigue tests in air and in room temperature water were performed to obtain comparable data and stable crack measuring conditions. In air environment, fatigue crack growth rate was increased with increasing temperature due to an increase in crack tip oxidation rate. In room temperature water, the fatigue crack growth rate was faster than in air and crack path varied on loading conditions. In simulated light water reactor (LWR) conditions, there was little environmental effect on the fatigue crack growth rate (FCGR) at low dissolved oxygen or at high loading frequency conditions. While the FCGR was enhanced at high oxygen condition, and the enhancement of crack growth rate increased as loading frequency decreased to a critical value. In fractography, environmentally assisted cracks, such as semi-cleavage and secondary intergranular crack, were found near sulfide inclusions only at high dissolved oxygen and low loading frequency condition. The high crack growth rate was related to environmentally assisted crack. These results indicated that environmentally assisted crack could be formed by the Electrochemical effect in specific loading condition.

• 한국초지조사료학회지
• /
• 제16권2호
• /
• pp.155-160
• /
• 1996

Spring sown oat crops were grown during early March to late June in 1993~1994. The crops were harvested at different stage of maturity to determine the yield performance, chemical components and net energy value of the plants for silage utilization. The pattern of dry matter accumulation, absolute growth rate(Abs. GR), leaf weight ratio(LWR), stalk diameter(SD) and other growth parameters were analysed to evaluate the suitability of the plant materials for ensiling. The effect5 of wilting treatment and formic acid addition on the quality of silage was also disscused during the experiments. Spring sown oat crops was evaluated as a suitable materials for whole plant silage making. The best qualitative oat silage was obtained at the stage of soti dough to hard dough, when the plant reached 32.2~35.7% in dry matter concentration. Spring sown oat produced 9.43 ton in DM basis, 5.79 ton in TDN and 57.550 MJ-NEL/ha in net energy lactation. Early harvesting of the oat corps needed wilting treatment of the material before ensiling. Under pre-witing treatment (1/2 day) and formic acid addition(0.3%) silage quality point of oat crops harvested at the bloom stage was improved from 58 to 84 point.