• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.51-56
• /
• 2000

This paper presents the characteristics of the dynamic response and calibration technique on a linear variable differential transformer(LVDT). The linear error of the LVDT was proven $\pm$1% in the static calibration and $\pm$0.5% in the dynamic calibration. In this paper, the linearity error generated in the static and dynamic state of the core movement can be eliminated using the correction algorithem of the static and dynamic state derived from the least square linear approximation for the nonlinearity of the curves of direct data fitting and Lagrange polynomials. With the static and dynamic calibration method, the calibration accuracy of the LVDT can be reduced to within $\pm{0.5%.}$.

• Transactions on Control, Automation and Systems Engineering
• /
• 제2권3호
• /
• pp.214-219
• /
• 2000

This paper presents a recoil and counter recoil motion measurement system using linear variable differential transformers (LVDT). The output of the LVDT is obtained from the differential voltage of the secondary transformers. Since a transducer core is attached to the motion body, the output is directly proportional to the movement length of the core. Displacement, velocity and acceleration are measured from the LVDT. With a comparison between the measurement result and the reference value obtained by the highly accurate Vernier calipers, it is proved that the measurement system with the LVDT is applicable to the test of the moving part of the mechanism with better accuracy.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2011년도 춘계학술대회 논문집
• /
• pp.871-872
• /
• 2011

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.11-22
• /
• 2012

본 연구는 RTK-GPS (Real Time Kinematic-Global Positioning System) 측위법을 이용한 변위 계측 결과, 가속도계를 이용한 변위계측 결과, 그리고 LVDT(Linear variable differential transformer)의 변위계측 결과를 비교하여 RTK-GPS와 가속도계 센서를 구조물에 적용할 때의 문제점들을 파악하였다. 또한, 관측빈도와 측위 정확도를 향상시킨 RTK-GPS와 가속도계를 이용한 변위계측 결과를 통합 계산하여 절대변위인 LVDT와 비교를 통해 생성된 통합 변위의 정확도와 타당성을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.60-62
• /
• 1994

In this paper, the LVDT with compensating secondary coil and secondary current boost circuit is proposed. The LVDT was experiment with a test device, and analyzed with numerical method (FEM), It is shown that the LVDT has a good linearities for the measurement of the displacement and position, etc..

• 한국측량학회지
• /
• 제28권1호
• /
• pp.57-64
• /
• 2010

구조물에 대한 재하실험에서 구조물의 변형 측정은 일반적으로 LVDT(Linear-Variable Differential Transformer)와 같은 접촉식 장비를 사용한다. 이러한 장비는 1방향의 측정만 가능하며 파괴실험까지 할 경우에는 장비의 손상을 막기 위해 구조물이 완전히 파괴되기 전에 실험을 멈추기 때문에 완전한 실험이 어렵다. 비측량용 디지털 카메라를 이용한 변협 측정은 부재의 손상에 따르는 원가의 손실이 없고 3차원 변형의 측정을 신속하게 할 수 있기 때문에 재하실험에 활용성이 높다. 본 연구에서는 Nikon D80 DSLR(Digital Single Lens Reflex)카메라를 이용하여 보에 대한 재하실험의 변형을 측정하고, 그 결과를 LVDT를 이용한 결과와 비교하여 정확도를 평가하였다. 실험결과 지상수치사진측량의 자체 정확도는 X,Y,Z 축 방향으로 각각 ${\pm}$0.5mm, ${\pm}$0.5mm, ${\pm}$0.6mm로 나타났으며, LVDT와의 비교에서도 RMSE ${\pm}$0.57mm의 정확도로 측정이 가능함을 증명하였다.

• 제어로봇시스템학회논문지
• /
• 제6권1호
• /
• pp.50-50
• /
• 2000

• 한국산업융합학회 논문집
• /
• 제19권3호
• /
• pp.160-166
• /
• 2016

This study proposes the development and performance evaluation of electronic proportional control valve having an LVDT. The electronic proportional control valve is composed of hydraulic valve, proportional solenoid and controller. LVDT is to reduce the steady state error for the reference input of the controller by the feedback signal to detect the displacement of the spool. Designed LVDT is applied to the common proportional valve. In order to evaluate the performance of the developed valve, the hydraulic test equipment was developed and flow tests were carried out. From experimental results, it was proved that the hysteresis was less than 1% based on the maximum flow rate.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.11-19
• /
• 2021

Linear variable differential transformer (LVDT) is a displacement sensor and is commonly used owing to its wide measurement range, excellent linearity, high sensitivity, and precision. To improve the output characteristics of LVDT, a few studies have been conducted to analyze the output using a theoretical method or a finite element method. However, the material properties of the core and the electromagnetic force acting on the core were not considered in the previous studies. In this study, a finite element analysis model was proposed considering the characteristics of the LVDT composed of coils, core, magnetic shell and electric circuit, and the core displacement. Using the proposed model, changes in sensitivity and linear region of LVDT according to changes in process and material parameters were analyzed. The outputs of the LVDT model were compared with those of the theoretical analysis, and then, the proposed analysis model was validated. When the electrical conductivity of the core was high and the relative magnetic permeability was low, the decrease in sensitivity was large. Additionally, an increase in the frequency of the power led to further decrease in sensitivity. The electromagnetic force applied on the core increased as the voltage increased, the frequency decreased, and the core displacement increased.

• 한국군사과학기술학회지
• /
• 제9권1호
• /
• pp.89-98
• /
• 2006

This paper describes signal attenuation characteristics as splicing the output on LVDT for stability and reliability of switching mechanism, which is developed to use common signal between FLCC and EDFLCC, on T-50 aircraft. The method of test is classified a Pspice simulation and an actual hardware evaluation. The difference of error margin for two methods is 10times, the latter higher. The result in this experiment shows that the signal attenuation as splicing the output on LVDT doesn't affect and the static error margin is 53% for develope the EDFLCC.