• 한국산업융합학회 논문집
• /
• 제25권2_2호
• /
• pp.193-198
• /
• 2022

In this paper, we introduce the improved control method are communicated between a master and a slave robot in the teleoperation systems. When the master and slave robots are located in different places, time delay is unavoidable under the network environment and it is well known that the system can become unstable when even a small time delay exists in the communication channel. The time delay may cause instability in teleoperation systems especially if those systems include haptic feedback. This paper presents a control scheme based on the estimator with virtual master model in teleoperation systems over the network. As the behavior of virtual model is tracking the one of master model, the operator can control real master robot by manipulating the virtual robot. And LQG/LTR scheme was adopted for the compensation of un-modeled dynamics. The approach is based on virtual master model, which has been implemented on a robot over the network. Its performance is verified by the computer simulation and the experiment.

• 제어로봇시스템학회논문지
• /
• 제8권9호
• /
• pp.757-763
• /
• 2002

A newly designed haptic interface enables an operator to control a remote robot precisely. It transmits position information to the remote robot and feeds back the interaction force from it. A control algorithm of haptic interface has been studied to improve the robustness and stability to uncertain dynamic environments with a proposed contact dynamic model that incorporates human hand dynamics. A simplified hybrid parallel robot dynamic model fur a 6 DOF haptic device was proposed to from a real time control system, which does not include nonlinear components. LQC/LTR scheme was adopted in this paper for the compensation of un-modeled dynamics. The recovery of the farce from the remote robot at the haptic interface was demonstrated through the experiments.

• 대한기계학회논문집A
• /
• 제29권3호
• /
• pp.455-461
• /
• 2005

This research studied robust design of composite hand for LTR (LCD glass Transfer Robot). $1^{st}$ DOE (Design of Experiment) was conducted to find out vital few Xs. 108 experiments were performed and their results were statistically analyzed. Pareto chart analysis shows that the geometric parameters (height and width of composite beam) are more important than material parameters $(E_{1},\;E_{2})$ or stacking sequence angle. Also, the stacking sequence of mid-layer is more important than that of outer-layer. The main effect plots shows that the maximum deflection of LTR hand is minimized with increasing height, width of beam and layer thickness. $2^{nd}$ DOE was conducted to obtain RSM (Response Surface Method) equation. 25 experiments were conducted. The CCD (Central Composite Design) technique with four factors was used. The coefficient of determination $(R^{2})$ for the calculated RSM equation was 0.989. Optimum design was conducted using the RSM equation. Multi-island genetic algorithm was used to optimum design. Optimum values for beam height, beam width, layer thickness and beam length were 24.9mm, 186.6mnL 0.15mm and 2402.4mm respectively. An approximate value of 0.77mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be con trolled within $2{\%}$ of average design value

• 한국지능시스템학회논문지
• /
• 제18권6호
• /
• pp.746-753
• /
• 2008

본 논문에서는 원격 제어 시스템에 있어 조작자와 기계사이의 시각적 또는 근육지각운동의 연결에 있어서 조작자의 안정된 작업환경을 확보하기 위해 가상 모델을 이용하고, 또한 가변 시간 지연의 추정 및 예측 기법을 적용함으로써 원격조작의 실현성을 향상시키기 위한 방법을 제시하고 있다. 원격제어시스템에서의 실현성 향상을 위해 가상 모델을 설계하고, 가상의 모델이 원격의 로봇과 시간적으로 동일한 움직임을 할 수 있도록 구성함으로서 조작자는 원격의 로봇을 가상의 모델을 통해 조작할 수 있도록 시스템을 구성하였다. 시뮬레이션과 실험을 통하여 원격조작으로 가상의 모델을 제어함으로써 원격의 로봇을 제어하고, 가상의 모델을 통해 원격의 로봇의 실시간 제어에 가능성을 제시하였다.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.62-68
• /
• 1996

Linear controllers, such as LQG/LTR controller, have been investigated to control flexible link manipulators. The performance and complexity of these depend largely on the linearized model upon which the controller is designed. In this study, singular perturbation model is tested in designing a LQG/LTR controller for a flexible link manipulator. The order of the resulting controller is much lower than the one based on a full model. Through numerical study, it is shown that the performance of the proposed controller reaches reasonably to the one based on the full model.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.401-405
• /
• 1996

A new method of nonlinear robust controller synthesis is introduced which is an extension of linear mixed $H_2/H_{\infty}$ control. This method guarantees robust stability fur hard nonlinearity and uncertainty of the plant. The method is applied to the control of a flexible link of robot with Coulomb friction. Simulation shows good performances with respect to the response and the robustness.