• ETRI Journal
• /
• v.39 no.2
• /
• pp.264-274
• /
• 2017

Recently, mobile positioning enhancement has attracted much attention in the 3rd generation partnership project long-term evolution system. In particular, for urban canyon environments, the need for three-dimensional (3D) positioning has increased to enable the altitude of users to be measured. For several decades, several time difference of arrival (TDOA-) based 3D positioning methods have been studied; however, they are only available when at least four evolved Node Bs (eNBs) exist nearby or when all eNBs have the same height. Therefore, in this paper, we propose a new 3D positioning method that estimates the 3D coordinates of a user using three types of two-dimensional (2D) TDOAs. However, the give inaccurate results owing to the undefined axis of the 2D coordinate plane. Therefore, we propose a novel derivation of the hyperbola equation, which includes the undefined axis coordinate in the 2D hyperbola equation. Then, we propose an interaction algorithm that mutually supplies the undefined axis coordinate of users among 2D TDOAs. By performing extensive simulations, we verify that the proposed method is the only solution applicable by using three eNBs with different heights.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.895-902
• /
• 2014

This paper presents a 2-stage CMOS power amplifier for the 1.75 GHz band using a $0.18-{\mu}m$ CMOS process. Using ADS simulation, a power gain of 28 dB and an efficiency of 45 % at an 1dB compression point of 27 dBm were achieved. The implemented CMOS power amplifier delivered an output power of up to 24.8 dBm with a power-added efficiency of 41.3 % and a power gain of 22.9 dB. For a 16-QAM uplink LTE signal, the PA exhibited a power gain of 22.6 dB and an average output power of 23.1 dBm with a PAE of 35.1 % while meeting an ACLR(Adjacent Channel Leakage Ratio) level of -30 dBc.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38A no.5
• /
• pp.401-408
• /
• 2013

Dual-layer differential codebook using 8-PSK (phase shift keying) constellation as its codeword elements, is proposed for Long term evolution (LTE) and/or LTE-Advanced systems. Due to the temporal correlation of the adjacent channel matrices, the consecutive precoding matrices are likely to be similar. This approach quantize only the differential information of the channel instead of the whole channel subspace, which virtually increase the codebook size to realize more accurate quantization of the channel. Especially, the proposed codebook has the same properties of LTE release-8 codebook that is, constant modulus, complexity reduction, and nested property. The mobile station can be designed by using less expensive non-linear amplifier utilizing constant modulus property. Computer simulations show that the capacity of the proposed dual-layer codebook performs almost 1.2dB better than those of any other non-differential codebooks with the same amount of feedback information.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.126-129
• /
• 2015

Device-to-device (D2D) communications, a subset of Proximity-based Services that enables direct communication between LTE network subscribers, is gaining popularity. It is well underway to be adopted in cellular communication systems for pedestrian and connected-vehicles alike. In this paper, we briefly present our model of an Evolved Packet Core Network-assisted device discovery simulator and show the applicability of Proximity-based Services for Vehicular Ad-hoc Networks. Through the performance evaluation based on the developed simulation environment, it is shown that in case when users gather in the same vicinity, as in public transportation, LTE network data can be efficiently offloaded and multicasted through Wi-Fi for e.g. delivering traffic-related information and for the benefit of infotainment service consumers.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.3
• /
• pp.339-345
• /
• 2016

This paper presents a two-stage power amplifier MMIC using a $0.4{\mu}m$ GaN-HEMT process. The two-stage structure provides high gain and compact circuit size using an integrated inter-stage matching network. The size and loss of the inter-stage matching network can be reduced by including bond wires as part of the matching network. The two-stage power amplifier MMIC was fabricated with a chip size of $2.0{\times}1.9mm^2$ and was mounted on a $4{\times}4$ QFN carrier for evaluation. Using a downlink LTE signal with a PAPR of 6.5 dB and a channel bandwidth of 10 MHz for the 2.6 GHz band, the power amplifier MMIC exhibited a gain of 30 dB, a drain efficiency of 32%, and an ACLR of -31.4 dBc at an average output power of 36 dBm. Using two power amplifier MMICs for the carrier and peaking amplifiers, a Doherty power amplifier was designed and implemented. At a 6 dB back-off output power level of 39 dBm, a gain of 24.7 dB and a drain efficiency of 43.5% were achieved.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.5
• /
• pp.33-47
• /
• 2015

Cellular Network assisted device-to-device (D2D) communication has been growing to reduce the overload of eNodeB and mitigate the frequency shortage. However, by sharing the uplink frequency resource with the cellular network, the interference between cellular and D2D is increased. In this paper, we propose an advanced receiver for full suppression cancellation (FSC) to reduce the interference between cellular and D2D. The proposed receiver can suppress and cancel the interference by integrating the interference rejection combining (IRC) technique with successive interference cancellation (SIC). We perform a system level simulation based on the 20-MHz bandwidth of the 3GPP LTE-A system. Simulation results show that the proposed receiver can improve SINR, throughput and spectral efficiency compared to conventional receivers.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.2
• /
• pp.42-49
• /
• 2014

A broadband antenna using a main and a sub antenna for the mobile communication terminal such as mobile phone and ITS terminal is designed. Two antennas are based on the hybrid antenna that is operating both a monopole and a IFA(Inverted F Antenna). It's applied the transmission line to connect both antennas. Sub antenna located in small space of the terminal allows space usability for the terminal design. Antenna for the hexa-frequency band of LTE700, CDMA, GSM, DCS, PCS and WCDMA is designed and implemented on the bare PC board that is same size of the mobile phone. This antenna was measured 3 : 1 VSWR over the whole design band. And average gains and efficiencies were-3.78 ~ -2.62dBi and 41.9 ~ 54.73% for LTE700/CDMA/GSM frequency band, -3.75 ~ -1.84dBi and 42.19 ~ 65.46% for DCS/PCS/WCDMA frequency band.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.5
• /
• pp.52-64
• /
• 2013

• TTA Journal
• /
• s.155
• /
• pp.93-100
• /
• 2014

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37A no.10
• /
• pp.885-894
• /
• 2012

Currently, Demand of data traffic has rapidly increased by popular of smart device. It is very difficult to accommodate demand of data traffic by limited resource of base station (BS). To solve this problem, method has proposed that the Device-to-Device (D2D) reduce frequency overload of the BS and all of the user equipment (UE) inside the BS and neighbor BS don't allow communicating directly to BS. However, in LTE-Advance system cellular link and sharing radio resources of D2D link, the strong interference of the cellular network is still high. So we need to eliminate or mitigate the interference. In this paper, we use the transmission power control method and Soft Frequency Reuse (SFR) resource allocation method to mitigate the interference of the cellular link and D2D link. Simulation results show that the proposed scheme has high performance in terms of Signal to Noise Ratio (SINR) and system average throughput.