• Proceedings of the KIEE Conference
• /
• 2007.04c
• /
• pp.126-128
• /
• 2007

The purpose of This paper is the optimal design of a single-phase LSPM(Line-Start Permanent magnet Motor). A single-phase LSPM has a permanent magnet in the rotor that is same as induction motor. For that reason, the transient characteristics are very different from an induction motor Therefore, we need the PM design to consider a transient and steady- state characteristics. In this paper, we designed a single-phase LSPM that has a high power and a good starting characteristics, and analyzed the performance of designed LSPM by varying each parameters. Finally, we examined and compared the simulation results and the prototype motor's characteristics.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.8
• /
• pp.373-380
• /
• 2003

This paper consists of a study in post-assembly magnetization of LSPM (Line Start Permanent Magnet Motor). Recently, LSPM is noted as an alternative to the induction motor because it offers a very high efficiency and unity power factor, And it is necessary for permanent magnets to be magnetized by means of post-assembly magnetization in LSPMS because of the manufacturing cost involved. The manufacturing process is also simpler in post-assembly magnetization than in pre-assembly magnetization. Generally, permanent magnet motors are magnetized by their own stator coil or by magnetizing fixtures. However, the permanent magnet in a LSPM is scarcely magnetized by using them because of the eddy current of the rotor bar. Hence, it is necessary to design a magnetizing fixture that overcomes this problem. In this paper, the author analyses the post-assembly magnetization of a LSPM and proposes a method for designing the magnetizing fixture. The method that the author proposes is to make the number of coil turns greater in order to reduce the effect of the eddy current of the rotor bars.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1007-1008
• /
• 2011

LSPM(Line Start Permanent Motor)은 기존의 가정용으로 널리 사용되고 있는 단상유도기에 영구 자석을 삽입함으로써 별도의 회로 없이 정상상태에서 동기기로 작용하는 고효율의 전동기이다. 하지만 기동시 높은 전류로 인한 전기자 반작용과 온도 상승으로 인하여 자석의 불가역 감자가 빈번하게 일어나는 문제점을 가지고 있다. 이에 본 논문은 모터 형상에 따른 영구자석의 퍼미언스 계산을 통해 동작점을 산정함으로서 불가역 감자가 발생하지 않는 영구자석의 최적의 사이즈를 선정하는데 목적을 두었다.

• Proceedings of the KIEE Conference
• /
• 2007.10c
• /
• pp.77-79
• /
• 2007

In previous structure of single phase LSPM, there is large torque ripple that makes a noise and a vibration by a distortion of flux distribution in air gap. By this reason, the single phase LSPM is not accepted home applications. So, in this paper, we propose new structure of single phase LSPM(Line Start Permanent magnet Motor). The proposed model is reduced a torque ripple about a half than previous model.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.2B no.3
• /
• pp.90-94
• /
• 2002

The line start permanent magnet (LSPM) motor has been developed facilitate to the design of the synchronous motor. The rotor of this motor is composed of interior permanent magnets and aluminum bars instead of rotor windings. It is difficult to predict the performance characteristics accurately, because many characteristics are produced by the aluminum rotor bars and the permanent magnets. Therefore, in this paper the dynamic characteristics of the LSPM motor are described and compared via the time-stepped finite element method with those of the cage-type induction motor to find the characteristics of the permanent magnets and the rotor bars in the LSPM motor.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.67-69
• /
• 2009

본 논문에서는 자성재료의 비선형성을 고려한 단상 직입 영구자석형(LSPM) 동기전동기의 기동특성해석을 다룬다. 전동기의 운전상태에 따른 자성재료의 비선형특성을 고려하기 위해 정자장 유한요소법을 이용하여 d축과 q축에 대해 전류변화에 따른 인덕턴스를 추출하였다. 계산된 인덕턴스를 LSPM의 등가회로에 적용하였으며 Runge-Kutta 법을 이용하여 시간차분해석을 수행하였다. 제시된 해석방법으로 계산된 기동특성과 유한요소해석결과를 비교함으로써 비선형의 영향을 고찰 하였다.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.4B no.4
• /
• pp.190-195
• /
• 2004

This paper presents the analysis of the effects of non-uniform slots in a line start permanent magnet (LSPM) motor. For purposes of the investigation, the simple formula of $2^{nd}$resistance for rotors having different slot areas is deduced. The characteristic analysis using the formula is performed and compared with measurement results.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.6
• /
• pp.254-261
• /
• 2003

This study investigates magnetic circuit design of the Single-phase Line-start Permanent Magnet Synchronous Motor (LSPM) to develop the characteristics in steady state. In this paper, the saliency ratio, that is the ratio of q-axial inductance to d-axial inductance, and the inductance difference between q-axial inductance and d-axial inductance are increased. Design factor is selected permanent magnet position and rotor diameter. The analysis method of the synchronous motor on d-/q- axis coordinates is used for the positive component and the equivalent circuit of the induction motor is applied for the negative component analysis. Back-emf and d-q- axial inductance is analyzed by using 2 dimensional Finite Element Method (FEM). Characteristic analysis results with variation of design factor are reflected magnetic circuit design of LSPM. The characteristics of design model are compared with the characteristic of initial model.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.586-588
• /
• 2002

This study investigaties magnetic circuit design of the Line-Start Permanent Magnet Synchronous Motor (LSPM) for advanced reluctance torque in steady state. Back-emf and d-/q-axial inductance is analyzed by using 2 dimensional Finite Element Method (FEM). These results are reflected characteristic analysis of LSPM.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.149-151
• /
• 2006

This paper shows the characteristic analysis of single-phase LSPM(Line Start Permanent Magnet) synchronous motor considering overhang structure. To obtain the dynamic and steady performance of the motor, the D-Q equivalent circuit is used and the circuit parameters are extracted by 3D FEM. The performance of the model with overhang is compared with conventional model without overhang on the condition that both models have the same volume of the permanent magnet.